Micro drone/Tiny Whoop LED circle gates by Jezric

Last crawled date: 3 years ago

The box and box clamp are all that is required to make 1 gate, the stand is optional. Also the stand requires a large bed printer (i.e. CR-10 - 300mm x 300mm bed), could be easily scaled to fit a smaller printer, if anyone needs that, leave a comment.
https://youtu.be/tInfX4PQD9M
Print with no support, use M3 (x2 of 5mm - to clamp the tubing), x2 of 12mm - for the cover).
For use with 1/2 inch (outside diameter) semi transparent polyethylene tubing (cheap at Home Depot or the like):
1/2 in. O.D. x 3/8 in. I.D. x 25 ft. Polyethylene Tubehttps://www.homedepot.com/p/Everbilt-1-2-in-O-D-x-3-8-in-I-D-x-25-ft-Polyethylene-Tube-301844/207144259
Use mini "fairy" lights, color battery powered LED light strands, I found that blue shows up the best. Super cheap on Amazon:

Amazon keeps changing their links to these, so just search "Fairy Lights", and you should find em.https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=fairy+lights