Thingiverse
Merv filter box by PKKShadow
by Thingiverse
Last crawled date: 4 years, 1 month ago
So, I thought of this because of this tweet: https://twitter.com/DempMcgee/status/1241347461307867136?s=20
It inspired me to create a larger version that is 6x4 inches on the inside of the box (which is also a forced air system.)
This version is passive (no electricity) and is only 6.5x3 inches on the outside of the filter box.
M3 screws are used to hold the top down which also compress the gasket. Screws are screwed into brass M3 inserts instead of threading directly into the plastic. The gasket is about 1/16th inch in thickness and I believe silicone based gasket material would be best (I'm pretty sure the correct rubber would work as well.)
The outlet is for 1 inch hosing/tubing; can be acquired from online stores. I would avoid PVC based hosing/tubing as I've read it can off gas unsavory fumes.
The filter media can be acquired from hepa filters or merv 13 or even merv 8 filters. Cut into pieces and cut to the dimensions of the inside of the box.
I don't own a printer, so I can't test how well it would print, or how well it would work. Please contact me if you wish to help me fund a printer or if you have made one of these and have suggestions on how to improve it.
It inspired me to create a larger version that is 6x4 inches on the inside of the box (which is also a forced air system.)
This version is passive (no electricity) and is only 6.5x3 inches on the outside of the filter box.
M3 screws are used to hold the top down which also compress the gasket. Screws are screwed into brass M3 inserts instead of threading directly into the plastic. The gasket is about 1/16th inch in thickness and I believe silicone based gasket material would be best (I'm pretty sure the correct rubber would work as well.)
The outlet is for 1 inch hosing/tubing; can be acquired from online stores. I would avoid PVC based hosing/tubing as I've read it can off gas unsavory fumes.
The filter media can be acquired from hepa filters or merv 13 or even merv 8 filters. Cut into pieces and cut to the dimensions of the inside of the box.
I don't own a printer, so I can't test how well it would print, or how well it would work. Please contact me if you wish to help me fund a printer or if you have made one of these and have suggestions on how to improve it.
Similar models
thingiverse
free
Cyclonic Water Filter by gringer
...have also included a 15ml falcon tube version, but it doesn't work as well because the outlet hole isn't inside the tube.
thingiverse
free
M3 Self-Tapping Enclosure Door Knob - CTC - Flashforge - Wanhao by Reight
...i've only made this with abs so i don't know if pla would work as well though.
plain, simple and it works.
enjoy ^_^
thingiverse
free
Garden hose to 1/2" barb connector by Chaceb94
... hose everything worked out just fine. i would add a hose washer inside or lots of plumber's tape if you want it to not leak.
thingiverse
free
Filter adapter for CPAP mask by asemeco
...mile.amazon.com/gp/product/b07fbwjzr5
merv-13 a/c filter: https://smile.amazon.com/aerostar-pleated-merv-13-16x25x1/dp/b01cr9jngs
thingiverse
free
Cyclone dust separator / vortex filter by LizzyDesign
...download a conical connector designed by doobedoobedo which will fit various size hoses. http://www.thingiverse.com/thing:2083622
thingiverse
free
MSP430 Launchbox Case by larsie
...pad and fits a display board i've designed and sell on the 43oh.com store. but the concept can be used for any box of course.
thingiverse
free
TronXY Control Box
...for it.
compatible with standard m3 screws
some of the screw holes are sunken so you'll want to add supports inside the shaft
thingiverse
free
Maker Faire Robot with Snap on Legs by merlinemrys
...hem and made them so they will snap on. i haven't printed this yet, so if you print it before me, tell me how the snaps work.
thingiverse
free
Laser Fume Scrubber - Fume Coffin Redux by micvee
...the files to be more clear. i hope this helps someone, but i didn't ever intend to share this, so i didn't document well.
thingiverse
free
Stacking box and drawer by Montravont
... have my printer yet so i don't know if this is completely accurate.
if you print one, please let me know how it works out.
Pkkshadow
thingiverse
free
PKKShadow's maker coin by PKKShadow
...pkkshadow's maker coin by pkkshadow
thingiverse
my maker coin. this was made within 30 mins with fusion 360.
thingiverse
free
Phone Stand by PKKShadow
...phone stand by pkkshadow
thingiverse
first phone stand i'm making.
thingiverse
free
120mm Fan Grill by PKKShadow
...120mm fan grill by pkkshadow
thingiverse
just a simple 120mm fan grill.
thingiverse
free
Ostron by PKKShadow
...of the ostron symbol. like my perrin one, i had to attach the two parts to make it one part. this is the real world after all. :p
thingiverse
free
New Loka by PKKShadow
...new loka by pkkshadow
thingiverse
seems like it can scale as big as you want to. did 50% infil because of how thin it is.
thingiverse
free
Simple Handle by PKKShadow
... by pkkshadow
thingiverse
simple handle that took me a few hours to model in fusion360. holes are for m4 or 8/32 bolts and nuts.
thingiverse
free
Lotus Emblem Keychain by PKKShadow
...blem keychain by pkkshadow
thingiverse
i printed this out, and thought it'd be good with a keychain hole. the hole is 2.5mm.
thingiverse
free
625ZZ bearing TUSH-inspired by PKKShadow
...625zz bearing tush-inspired by pkkshadow
thingiverse
just a copy of the tush but with 625zz bearings and m3 screws.
thingiverse
free
Simple Knob by PKKShadow
...fusion 360 to replace one that went missing for a desk i use. hole is 4.5mm. which is a bit smaller than the screw i plan to use.
thingiverse
free
The Perrin Sequence by PKKShadow
...mall pieces were one way i thought of that would allow me to have this as one single model. you will however have to rotate this.
Merv
3ddd
free
Zoomorphic Chair
...zoomorphic chair 3ddd mervekahraman , chair , bunny , merv kahraman stunning zoomorphic chair by merve...
thingiverse
free
Merv upgrade Insert by Chumy_
...merv upgrade insert by chumy_
thingiverse
based on https://www.thingiverse.com/thing:4730665.
modified things to faster setup.
thingiverse
free
Ancient Merv-Sultan Sanjar Mausoleum, Turkmenistan by galina_maker
...age. “state historical and cultural park ‘ancient merv.’” unesco world heritage centre, 26 jan. 2009, whc.unesco.org/en/list/886.
thingiverse
free
1/16 Traxxas Revo (MERV) Simple Big ESC Mount by daver18qc
... thing to your heart's desire !
be sure to position it like the cura pictures if you want a strong part without any supports.
thingiverse
free
Merv: The Heart of the Silk Road - Boardgame insert for the existing cardboard insert by jgrg1
...eces need to be placed in an alternating fashion, top/bottom/top - as the taper of the walls means they fit together more neatly.
thingiverse
free
Wheel and Tyre combo for Mini E-Revo 1/16 Merv by stremblay666
...also comes in two flavors : a single color and a dual color for those dual-extruder folks who want a little more customization :)
thingiverse
free
Filter adapter for CPAP mask by asemeco
...don't own one. cpap filters: https://smile.amazon.com/gp/product/b07fbwjzr5 merv-13 a/c filter: https://smile.amazon.com/aerostar-pleated-merv13-16x25x1/dp/b01cr9jngs ...
thingiverse
free
HOME Filter Modular Mask no Supports n95 HEPA MERV by vendevil
...4256265
coming improvements
flexible printed seal
better moisture protection for the intake
desiccant holder in the breath guard
thingiverse
free
"Billings" Filter for COVID-19 MASK by maso27
...merv 13 to 16 are rated for .3-1.0 micron particles.https://www.grainger.com/know-how/equipment-information/kh-what-is-mervrating-air-filter-rating-chart i can speak from personal experience that a hepa-rated...
Filter
3d_export
$10
cartridge filter
...cartridge filter
3dexport
cartridge filter
3d_export
$6
Bag filter
...bag filter
3dexport
bag filter
3d_export
$10
of dust filter
...of dust filter
3dexport
3d model of dust filter
3d_export
$10
of bag filter
...of bag filter
3dexport
3d model of bag filter
3d_export
$7
of bag filter
...of bag filter
3dexport
3d model of bag filter
turbosquid
$20
Filter
...ty free 3d model filter for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1512887)
3d_export
$10
bag filter
...he ash hopper. when the gas containing fine dust passes through the filter material, the dust is retained and the gas is purified
3ddd
$1
UFI Filter
...ufi filter
3ddd
фильтр , ufi
ufi oil filter
turbosquid
$30
Filter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
filters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.