Mellow Watercooled BMG carriage for Hevort by Abecia

Last crawled date: 3 years, 2 months ago

Mellows watercooled BMG mount for the HevORT 3D printer,
Important- When printing the partduct, print it stood on its flat end with supports touching buildplate only
All other parts can be printed with your favourite settings for supports where needed :)
After testing both the NFCrazy and the Volcano, I will be staying with the volcano. Reason being with the NF Crazy you cannot push the heatbreak all the way into the BMG. You have to use a longer piece of PTFE between the heatbreak and the BMG, it needs to stick out of the heatbreak around 10mm. without doing this the heatbreak will not reach the hotend.
Parts I ordered when putting this together
Watercooled BMGhttps://s.click.aliexpress.com/e/_9i4qLg
Volcanohttps://s.click.aliexpress.com/e/_A6DsuK
NFCrazy Hotendhttps://s.click.aliexpress.com/e/_AXU4gi
Adapter required for the NFCrazyhttps://s.click.aliexpress.com/e/_Ag7Jjc
70W heater for either hotendhttps://s.click.aliexpress.com/e/_AECYhU
Titanium and copper Heatbreakhttps://s.click.aliexpress.com/e/_AN76ui
5 x PT1000's (Cheaper buying 5 at a time)https://s.click.aliexpress.com/e/_9A3xjc
Also required are the nozzles and usual m3 screws and nuts etc
Update 01/Apr/21
Added Part cooling for Volcano
Minor tweak to remove excess plastic by the belt clamp on the main body
Extended the Bltouch outer mount 1.5mm to make it more suitable for the volcano