Thingiverse
Mellanox ConnectX2 Full Height Slot Cover by lowfat
by Thingiverse
Last crawled date: 3 years ago
This is for a single-port Mellanox ConnectX2 Ethernet card. I do not know if the Infiniband adapters are the same. So if you have one w/ a half height adapter and need a full height, this is solution.
I'd suggest using PLA as ABS was too brittle. Print with full supports. You will need to drill and tap screw holes to secure it to the drive after printing.
I'd suggest using PLA as ABS was too brittle. Print with full supports. You will need to drill and tap screw holes to secure it to the drive after printing.
Similar models
thingiverse
free
Full Height Bracket for QSFP PCIe Network Adapter (HP/Mellanox 649281-B21 Infiniband) by samuelpinches
... though for max strength.
feel free to message/comment if you would like the solidworks files.
hope this is useful to somebody :)
thingiverse
free
MCX312B Long Bracket - Dual port
...ectx-3 full height bracket - https://www.thingiverse.com/thing:3164278 which is only a single port.
i hope you find this helpful.
thingiverse
free
Mellanox ConnectX-3 MCX311A-XCAT Full-Height bracket
...st an export that might not have had the perfect settings for your printer and/or application ticked or might even be incomplete.
thingiverse
free
FusionIO ioScale Full Height Slot Cover by lowfat
...s was too brittle. print with full supports. you will need to drill and tap screw holes to secure it to the drive after printing.
thingiverse
free
Mellanox ConnectX-2 low profile bracket by Alioth
...s for this card was nearly impossible when i first decided to design this bracket. thankfully you can find some on ebay nowadays.
thingiverse
free
Mellanox network card short bracket
...work card short bracket
thingiverse
made this for a colleague, posting here in case anyone needs. made for mellanox network card
thingiverse
free
Mellanox MCX312B low profile bracket
...r... i have little enough hair as it is. a few hours with sketchup, and had these ready.
if these are handy for you, then enjoy!
thingiverse
free
3M Cartridge Adapter For Mask by ChiefBurningRubber
...d and bed orientation you won't need it anywhere else on the model.
i printed this 4-4-4 bottom-top-perimeters and 0% infill.
thingiverse
free
M42 - M48 adapter for astronomy equipment
...48 x 0.75mm
you must print it with superior quality, i used 0.1mm layer height
you will not get good thread with 0.2 layer height
thingiverse
free
Just me - Full body scan by udomuc
...rad 3d" is fully adjusted (lack of time at the moment) i will print it in full height.
if you give me a try let me know...
Mellanox
thingiverse
free
Mellanox network card short bracket
...work card short bracket
thingiverse
made this for a colleague, posting here in case anyone needs. made for mellanox network card
thingiverse
free
Mellanox ConnectX-2 low profile bracket by Alioth
...s for this card was nearly impossible when i first decided to design this bracket. thankfully you can find some on ebay nowadays.
thingiverse
free
Mellanox ConnectX-2 low profile bracket by Scrypt
...rent dimensions making it unusable for connectx-2 users. based on the work from alioth & lassebrown, i modified this to fit.
thingiverse
free
Mellanox ConnectX-3 MCX311A-XCAT Full-Height bracket
...st an export that might not have had the perfect settings for your printer and/or application ticked or might even be incomplete.
thingiverse
free
Mellanox MCX312B low profile bracket
...r... i have little enough hair as it is. a few hours with sketchup, and had these ready.
if these are handy for you, then enjoy!
thingiverse
free
Mellanox Connect-X 2 Low Profile Bracket - Dual SFP+ by udine
... bracket compared to the original template because otherwise it wouldn't fit into the "holders" on my server. ymmv.
thingiverse
free
Full Height Bracket for QSFP PCIe Network Adapter (HP/Mellanox 649281-B21 Infiniband) by samuelpinches
... though for max strength.
feel free to message/comment if you would like the solidworks files.
hope this is useful to somebody :)
thingiverse
free
Bracket for Mellanox ConnectX-3 CX353A
...at had the top of the bracket mirrored. the updated version should be the correct file with the proper orientation of everything.
thingiverse
free
Mellanox ConnectX-3 low profile bracket by LasseBrown
...d position and size of the transceiver cut-out as well as the extra holes for the leds. quick job, thanks to alioth, perfect fit.
Lowfat
thingiverse
free
Mountable Cable Sleeving Comb by lowfat
...mounted to the backside of the motherboard tray to keep wiring as clean as possible everywhere. designed to mount w/ an m3 screw.
thingiverse
free
MKS Sbase 1.3 Mount for 2020 by lowfat
...0mm screws and m3 t-nuts to hold in place. m3x5mm brass inserts are to be used on the feet to hold the controller board in place.
thingiverse
free
Solid State Relay Mount / Cover by lowfat
...to cover all connections.
edit may 4, 17: made cable openings larger as well as made the frame slightly larger for more strength.
thingiverse
free
FusionIO ioScale Full Height Slot Cover by lowfat
...s was too brittle. print with full supports. you will need to drill and tap screw holes to secure it to the drive after printing.
thingiverse
free
Oracle F40 Accelerator / Seagate Nytro Warpdrive full height adapter by lowfat
...e as lsi / seagate nytro warpdrive. printed w/ pla 75% infill w/ good results. beefed up to support the heavy weight of the card.
thingiverse
free
LSI 9260-8i / IBM M5015 Full Height Adapter by lowfat
... 9211-8i as well but i haven't tested it. have beefed the supports a bit so that it can hold up the battery pack w/o sagging.
thingiverse
free
MKS SBase 1.3 Top Cover by lowfat
...g off easily.
edit april 22, 17: redesigned it w/ larger hexagons. made it thicker, easier to print, and hopefully more durable.
thingiverse
free
Wilson 2. Heavy Duty Y Tensioner. by lowfat
... to heat up the m3 nut for it to slide down the hole.
an m4 x 25mm and m4 nut is required to secure the tensioner to the y idler.
thingiverse
free
Monoprice Mini. MKS Sbase 1.3 Conversion. by lowfat
...two spacers hold the other end of the mks board up so it isn't flopping around. that end doesn't get screwed down though.
Slot
3d_export
$5
slot handle
...slot handle
3dexport
slot handle
archibase_planet
free
Slot machine
...ase planet
slot machine slot-machine playing machine
slot machine n260311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Slot machine
... machine slot-machine one-armed bandit
slot machine novomatic gaminator n240911 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$5
narrow slot handle
...narrow slot handle
3dexport
narrow slot handle
turbosquid
$15
Slot Machine
...oyalty free 3d model slot machine for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710861)
turbosquid
$25
Slot Machine
... free 3d model slot machine for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1649555)
turbosquid
$25
Coin Slots
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$11
Slotted spoon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Slot Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
slotted spoon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Cover
archibase_planet
free
Cover
...cover
archibase planet
cover place setting
cover n170807 - 3d model for interior 3d visualization.
3ddd
$1
cover
...cover
3ddd
ковер , круглый
cover decor
archibase_planet
free
Cover
...cover
archibase planet
cover place setting setting
servis-cafe1930 - 3d model for interior 3d visualization.
turbosquid
free
Coverings
...rings
turbosquid
free 3d model coverings for download as dwg on turbosquid: 3d models for games, architecture, videos. (1279391)
3d_export
$5
plug cover
...plug cover
3dexport
plug cover
turbosquid
$25
Covers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
manhole cover
...manhole cover
3dexport
manhole cover gost, stl, step
turbosquid
$5
Street Gas Cover Manhole Cover
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Bed cover
...bed cover
3ddd
постельное белье
very useful bed cover
3d_export
$5
cpu cover
...cpu cover
3dexport
cpu cover, cpu box, sheet metal container
Full
3ddd
$1
Full Mobili
...ull mobili , шкаф
группа шкафов, серия мебели "классика" фабрики «full mobili»
turbosquid
$80
full man body+full facials
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Full Mobili
...сика , стол
стол круглый офисный серия мебели "классика" фабрики «full mobili»
3ddd
$1
FULL MOBILI
... стол
cтол офисный серии мебели "классика" итальянской компании full mobili
design_connected
$16
Full Circle
...full circle
designconnected
atmosphere full circle computer generated 3d model.
3d_export
$5
full office
...full office
3dexport
this is full office cgi model created with maya -detailed -textured -uv mapped
design_connected
$16
Full Moon
...full moon
designconnected
roche bobois full moon computer generated 3d model. designed by ragot, cedric.
turbosquid
$100
FULL KITCHEN
...squid
royalty free 3d model full kitchen for download as skp on turbosquid: 3d models for games, architecture, videos. (1345817)
turbosquid
$15
Full Bedroomset
...id
royalty free 3d model full bedroomset for download as max on turbosquid: 3d models for games, architecture, videos. (1540649)
3d_export
$10
full human body
...full human body
3dexport
it is a full human sculpt
Height
turbosquid
$5
Height Stool
...ree 3d model height stool for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1703076)
cg_studio
$20
Height Gauge3d model
...ndustrial height gauge tool indutsrial
- height gauge 3d model, royalty free license available, instant download after purchase.
turbosquid
$6
4.5 meters in height
...oyalty free 3d model 4.5 meters in height for download as max on turbosquid: 3d models for games, architecture, videos. (1213038)
turbosquid
$1
Counter Height Stool
... model counter height stool for download as obj, dae, and skp on turbosquid: 3d models for games, architecture, videos. (1318792)
turbosquid
$10
low height cabinet
...ow height cabinet for download as max, max, fbx, obj, and max on turbosquid: 3d models for games, architecture, videos. (1545300)
turbosquid
$5
Counter Height Bench
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Stanley furniture - Avalon heights
...stanley furniture - avalon heights
3ddd
stanley furniture
stanley furniture - avalon heights metal base empire writing desk
3d_ocean
$1
Maximum height sign
...ure applied. the object is ready to import and render in both formats. the model has been built to be able to subdivide flawle...
turbosquid
$20
Low height cabinet design
...y free 3d model low height cabinet design for download as max on turbosquid: 3d models for games, architecture, videos. (1402496)
turbosquid
$15
Atlantis Bar Height chair
...y free 3d model atlantis bar height chair for download as max on turbosquid: 3d models for games, architecture, videos. (1271123)