MeArm 0.4 Printable (Re-Organized and Improved) by jonahl

Last crawled date: 3 years ago

Dingo_aus did a great job of transforming the MeArm 4.0 into a printable version.
However, I found that the files are not quiet friendly for my Printer.
So I modify them for better result.
Thing I did include :
Introduce a round BasePanel (BasePanel_MG90_Round.STL)
-- Designed for TowerPro MG90 servo, may works for others
-- Significantly decrease the gap between the rotation part
Introduce a Wedged Bucket part (ServoBucket_Wedged.stl)
-- For more tolerance on first layer height
Introduce a Wedged Claw Servo Bucket part (mearm_part8_Changed_v2.STL)
-- For more tolerance on first layer height
Lay-down the original parts to print at a 20cm x 20 cm bed.
The Part 7 of Dingo_aus's integrated model are not included because 20cm x 20 cm print bed can print the motherboard (Part 26) in one piece.
Updated at 1-July-2016:
Get a drop-in improvement by using the Version 1.0 Claw unit:http://www.thingiverse.com/thing:1654289