Mean Well RT series PSU cover

Last crawled date: 4 years, 3 months ago

This is a cover for the Mean Well RT series of power supplies. Tested with RT-65A and RT-85A, should fit RT-125A, RT-65B, etc. It has a 48x28mm opening on the side for a standard fused IEC power socket with switch. These are readily available on Aliexpress, Ebay, and other electronics outlets and tend to vary by +or- 1mm depending on the exact model you have. I am using the AC-05 part from this seller : https://www.aliexpress.com/item/32961436466.html
2 different versions are supplied:
Basic version has a hole with an offset insert ramp so that you can't poke your fingers directly to the terminals. This works with your existing cable, provided it can pass through.
Universal version has a panel mount for Molex 6 pin Mini Fit Jr 5559 female connector: https://www.molex.com/molex/products/datasheet.jsp?part=active/0469990295_MOLEX_PARTS.xml
This allows you to make your own quick swap cables for connecting your device to the PSU. I use these for arcade superguns such as the Minigun or the HAS.