Mean Well LRS-350 PSU Cover - Fanless - With logo by rmpel

Last crawled date: 3 years ago

Remix that is an easier print;
Instead of honeycombs, which are slow to print, I have added alternating lines of 1.2 mm wide, 0.2 mm high.
When printed on 0.1 or 0.2 layer height, the nozzle will have to move only diagonally in 1 direction every layer (0.2) or every 2 layers (0.1).
This saves time and filament and because 0.2 layer height is not that much, the resulting grid is surprisingly solid :)
Also added the Mean Well logo. Hopefully the letters survive removal from build plate.
I print on glass with 3DLac and place it in the fridge after print; I will have no trouble. But if you use a different printed that requires force, however so little, to remove the print from the bed, then the letters will probably break off.
I intend to print this for my Ender 5 with relocated enclosure and self designed lid, with a 120mm fan, so there will be cooling, just not from the psu's own fan (which is loud)
For my Ender 3 I will use a different one with a silent large fan.
Update:
I have re-remixed this design to exact dimensions with extras;
This design fits well, but is 200 mm long.
The original lid is 198 mm long.
The result is that my connector guard doesn't fit very well.
Also I found myself missing the indicators for +/- and Live/Neutral/Ground.
Go see it here: https://www.thingiverse.com/thing:4800781
final note
If you like it, click the like (heart)
If you print it; post a make
If you have suggestions for improvements, questions, any kind of remarks; leave a comment
Looking at the download statistics, you guys and gals out there really like this thing :) so, leave a like, a make, a comment.
Much appreciated!