Masterbox Q300L Heavy Duty Handle by Psych0o

Last crawled date: 3 years, 4 months ago

I wanted a small mATX case that I could easily transport. Q300L was one of the smallest and lightest cases and it was super cheap (so there's little regret on modding it). But I really wanted a handle so I just made one.
For this one you'll need 4x M5x30 screws (M5x25 will also work) and 4x M5 nuts.
For the mesh I cut two rectangle holes. To make this easier, I used white marker on the 4 holes the screw goes through, then put the mesh on the case, align it and you can see the white markings through it, so you can now easily mark the two holes and cut them roughly.
I mounted the mesh in between the case and handle, so it doesn't move around but you could easily also cut an exact shape of the handle and slice the middle portion so you can remove it without taking the handle apart.