Martian II Radio Stack by carbrf

Last crawled date: 3 years ago

Took a few designs I liked and made a VTX/RX mount to sit in the rear of the Martian II. This works with an X4R RX and many generic 200/600mw VTX's.
There are 3 pieces or layers:
Layer 1 (bottom) is for the X4R RX.
Layer 2 (middle) is for the VTX
Layer 3 (top) is the VTX cover.
The antenna wires are meant to come out the front holes and curve around into the antenna tubes, as shown in pictures 3&4.
Printable antenna tubes are also included, but I recommend using real ones, as the printed ones tend to snap easily.
Update 06/02/18: Updated VTX TOP so that it sits better.