Thingiverse
MakerTree 3D: Encapsulated Lightbulb by Polynomial
by Thingiverse
Last crawled date: 3 years ago
Toying with some ideas utilizing the transparent qualities of the clear resins we've been working with. Once sanded and polished, the possibilities are endless. These are some pictures of this project idea so far. It was designed quickly in AutoDesk 123D Design and printed up on our Form1+. We did the bulb portion i Spot-A clear HT resin and the base was done in the MadeSolid general purpose black resin, both parts printed at the 100 micron setting.
Once printing was completed, the bulb portion was sanded with 220, 320, 600, 1200 and finally 2000 grit sandpaper then polished up with all 3 grades of Novus plastic polish with a buffing wheel.
The next portion of the project is to run a small LED bulb through a channel I designed in the back of the base, and up into the bottom of the bulb portion which should highlight the bulb further yet.
Once printing was completed, the bulb portion was sanded with 220, 320, 600, 1200 and finally 2000 grit sandpaper then polished up with all 3 grades of Novus plastic polish with a buffing wheel.
The next portion of the project is to run a small LED bulb through a channel I designed in the back of the base, and up into the bottom of the bulb portion which should highlight the bulb further yet.
Similar models
thingiverse
free
CAM-Source 3D: Encapsulated Double Helix by Polynomial
... files which are posted on here. i'll post pictures once we get our next successful test prints of the parts and polished up.
thingiverse
free
VW Punisher Skull with base by feersummendjinn
...tched to black to get a good contrast, once the print was complete i quickly sanded and resin coated the print for a nice finish.
thingiverse
free
Up house by Thewall191
...made by greg_bejtlich and added balloons to the top similar to the look of the funko pop version of...
thingiverse
free
bender beer cozy revision 3 by montygo
...place. this is a work in progress at the moment and ill see how it prints once i get my printer up and running. made in tinkercad
thingiverse
free
Saber Crystal by Crimsus
...4000 wet sand is adequate) for glass effect. polishing with rotary tool and rouge bar not recommended due to temperature issues.
thingiverse
free
Stele Necron 9VLED by crisiinvolo
...anded, filled the gaps with spray filler and sanded again with 400 wet send paper, than primered in black.
some paints will come.
grabcad
free
Home Built Kayak
... fiberglass fabric and resin. once the whole thing is set up and rigid you can go back and remove some ribs to make room to sit.
thingiverse
free
Front Door Key holder by Kawawunga
.... after printing, sanding, i painted the entire object and poured clear resin overtop and filling in the wells for the dice part.
thingiverse
free
Beholder inspired by ROTMG by avink
... the solid and hollowed models anyway. some sanding was needed on the support in order to press fit it to the model and the base.
thingiverse
free
Bunk Bed by mfazio_science
... glued together once printed. needed some sanding and filing to make a few parts fit, but overall the bed turned out pretty well.
Makertree
thingiverse
free
MakerTree 3D: Twisted Love by Polynomial
...makertree 3d: twisted love by polynomial
thingiverse
twisted love statue
thingiverse
free
MakerTree 3D: TomorrowWorld/ TomorrowLand necklace pendant by Polynomial
...omorrowworld/ tomorrowland necklace pendant by polynomial
thingiverse
this is a pendant of the tomorrowworld/ tomorrowland logo.
thingiverse
free
MakerTree 3D: (2) Toothbrush Holder by Polynomial
...) toothbrush holder by polynomial
thingiverse
a double tooth brush holder.
print file laying on it's side at any resolution.
thingiverse
free
MakerTree 3D: A small screw-on propeller by Polynomial
...tinkering around with 123d design for a few minutes and this was the result. enjoy, if this can be of any use or interest to you.
thingiverse
free
MakerTree 3D: BirdRacer by Polynomial
...t's original size). the part was printed on our form1+ sla with spot-a ht clear resin with their transparent green dye added.
thingiverse
free
MakerTree 3D: Eye Glass Camera concept by Polynomial
...and a small hole down the length, for an earpiece wire.
this may continue as a wip, or simply remain in a conceptual state as-is.
thingiverse
free
MakerTree 3D: Wicked Rabbit pendant by Polynomial
...kered with a bit in autodesk 123d design. i figured i put it up here in case anyone wanted to print or remix with it in some way.
Polynomial
thingiverse
free
MakerTree 3D: Twisted Love by Polynomial
...makertree 3d: twisted love by polynomial
thingiverse
twisted love statue
thingiverse
free
Flat Earth Map by Polynomial
...flat earth map by polynomial
thingiverse
this is a flat earth model based on a flat-earth map found online.
thingiverse
free
MakerTree 3D: TomorrowWorld/ TomorrowLand necklace pendant by Polynomial
...omorrowworld/ tomorrowland necklace pendant by polynomial
thingiverse
this is a pendant of the tomorrowworld/ tomorrowland logo.
thingiverse
free
MakerTree 3D: (2) Toothbrush Holder by Polynomial
...) toothbrush holder by polynomial
thingiverse
a double tooth brush holder.
print file laying on it's side at any resolution.
thingiverse
free
Polynomial Lamp Shade, Vase, Knob.. Whatever by badger
...ad a knob for a drawer or a coat hanger in my mind.
might not fit to your printer.. change the height. ;)
print in the vase mode.
thingiverse
free
MakerTree 3D: A small screw-on propeller by Polynomial
...tinkering around with 123d design for a few minutes and this was the result. enjoy, if this can be of any use or interest to you.
thingiverse
free
Art Outside festival - necklace pendant by Polynomial
...2005. print, optionally paint or decorate the pendant, lace string through the hole at the top and hang or wear it from anywhere.
thingiverse
free
Art Outside festival - camp canopy decoration by Polynomial
...tival from the austin, tx area. print, optionally paint or decorate, and hang them from your canopy, or wherever else you please.
thingiverse
free
Bassnectar pendant by Polynomial
...ndant.stl) that has a slightly adjusted hole to allow for the simple necklace string i have on hand here, to feed through easier.
thingiverse
free
iPhone6 mount for Toyota Camry by Polynomial
... the phone is then positioned towards the driver, while also maintaining clearance from the radio knobs just below the air vents.
Encapsulated
3d_export
$10
Pill Capsule 3D Model
...ch two piece clinic healthcare
pill capsule 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 101947 3dexport
3ddd
$1
Кресло Christopher Guy Musette
...mlessly into the outwardly curving arms.
size
w80 x d76 x h80 cm
в архиве два файла для макса 2015 под корону и вирей +obj + fbx
3ddd
$1
Timothy Oulton Sophie Pendant
...rystal and iron for a stunning display of glamour.
dimensions
l: 12” / 30.5 cm
w: 12” / 30.5 cm
h: 18.3” / 46.5 cm
thingiverse
free
Simple Encapsulator Manually caps Size 00
...simple encapsulator manually caps size 00
thingiverse
simple and cheap encapsulator only for a caps size 00
thingiverse
free
Encapsulated speaker by ndres
...es
thingiverse
video: http://www.youtube.com/watch?v=ait_cn6-nq4
my blog and more information: http://www.conplexio.blogspot.com
thingiverse
free
Encapsulated Nut Procedure by Jkesmm
...encapsulated nut procedure by jkesmm
thingiverse
a technique for making a part with a nut internally captured and printed over
thingiverse
free
Hinge Pin Encapsulated by rockyrobchau
...e robust look and feel to it.
you can use only one side of the cap piece, to your preference - pin stays put and rotates freely.
thingiverse
free
6mm Belt Idler (Single Encapsulated 624 Bearing) by AlexBolderoff
...ine
free to use, but not for commercial re-use or copy.
stl. files available in 1.00% and 1.05% to compensate for any shrinkage
thingiverse
free
UE MegaBoom Holder (and UE Boom encapsulated) by svabra
... cradle. the embossed screw holes are matched to the ikea pax holes. but can - of course - be used for any other surface as well.
thingiverse
free
CAM-Source 3D: Encapsulated Double Helix by Polynomial
... files which are posted on here. i'll post pictures once we get our next successful test prints of the parts and polished up.
Lightbulb
3d_ocean
$5
Lightbulb
...lightbulb
3docean
electric electricity household light-bulb
a simple household lightbulb
3d_ocean
$5
Lightbulb 3D
...lightbulb 3d
3docean
lightbulb
lightbulb 3d
turbosquid
$14
Lightbulb
...d
royalty free 3d model lightbulb for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1365411)
turbosquid
$11
Lightbulb
...lty free 3d model lightbulb for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1197008)
turbosquid
$1
lightbulb
...y free 3d model lightbulb for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1375644)
3d_ocean
$15
LightBulb
...ne or rendering. included are the .3ds and .obj files maps used (2) scene files with one containing the bulb as a stand alone ...
turbosquid
$10
Lightbulb
...ree 3d model lightbulb for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1571208)
turbosquid
$10
Lightbulb
...e 3d model lightbulb for download as obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1191328)
turbosquid
$3
Lightbulb
...ree 3d model lightbulb for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1521108)
3ddd
$1
Лампочка | lightbulb
...лампочка | lightbulb
3ddd
лампочка
лампочка,lightbulb,сотка