Magnetic Catan Set by BSDCreates

Last crawled date: 3 years, 4 months ago

I painted these parts, but I can imagine printing them in seperate colours might be nice too.
In this set I've included the original tile types, as a two piece set. The magnet holder is common to all tiles and you place 12 3mm magnets into the holes. Make sure you alternate the polarity of the magnets as you insert them and that you insert them the same orientation for each different piece. That is to say if you start at one hole, and go clockwise around the magnet holder you insert one with a north side facing out, then northside facing in etc till you've gone round the entire loop of the piece. Comment if that doesn't make sense.
I've also included a Gold type tile, this is for my planned sea farers expansion.
UPDATE: Resource tokens are now included, I have printed them on my resin 3D printer, and then I painted them I like them but I can see room for improvement. These are not of my design. They are taken from these 3 sources:
Wood and Wheat resource by nnen https://www.thingiverse.com/thing:646001
Rock and Brick resource by srifraf https://www.thingiverse.com/thing:2738575
Sheep resource by Jessiefox https://www.thingiverse.com/thing:2387435
Included also are ports also magnetic
Development card tokens are now included
BTW I will be sharing my f3d file incase any of you wanted to make customisations to it.
Main parts - https://a360.co/3glUH9j
Development tokens - https://a360.co/34p5TQb
Notes with printing:
Take care with your horizontal expansion settings for this one, if you tune it right you should be able to insert the magnets relatively easy with a tight fit.
Make sure that if you are using a 0.4mm nozzle and you are printing parts like the fields, quarry, that you have the setting on to print thin walls, and you might want to reduce your line thickness.
ENJOY!