MAGIC MUSHROOM LED LIGHT by SPACE1218

Last crawled date: 2 years, 11 months ago

Many of you on FB group wanted this so here you have
Files are made from few different designes here on thingiverse i am sorry for those whos files were used :D i just dont remember who uploaded the files .. coz its a compilation of many
Caps needs to be resized, choose the ones you like the most
RESISTORS:https://www.aliexpress.com/item/32859449412.html
LEDShttps://www.aliexpress.com/item/32820088600.html
print the tubes with ZERO top and bottom layers , and 2-3 walls ,and use MUCH number of BRIM
caps should be printed at 100% infill
base at 20-100%
i used 3D PEN to glue everything together
all leds are in Parallel
under teh base there is a small hole to wire all the cables
i have used hotglue gun to ˝isolate led snake˝ and shape when still hot between fingers so it fits into hole of tubes
when snakes inside .. add 2 or 3 leds on top ...
caps should be pick by your choice .. and resized (use tinkercad all files are small and edited in tinker)
if add LED on top .. make sure u clip the inside of the caps so it fits .... i used 3D pen for glueing so if led visible just melt plastic onto it .....
attach the USB cable and glue the bottom cap ...
i will never charge for a files in my life!
But if you would like to put a smile on my face, you can buy me a cup of coffe:https://paypal.me/space1218
the chepest one!!! Not those ˝rich people˝ Starbuck stuff!!!!!