Magic Eye VU Tube Indicator PCB Housing by Van_Houten 3d model
3dmdb logo
Thingiverse
Magic Eye VU Tube Indicator PCB Housing by Van_Houten

Magic Eye VU Tube Indicator PCB Housing by Van_Houten

by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a housing made for the
"6E2 EM84 EM87 EM800 6HU6 magic eye indicator tube vu meter pcb 3.5mm jack versio"
found on Ebay etc.
I will make a small tutorial how to solder some stuff because there are some 'mods' required for use of the led and power switch. Also the part list must be updated as i dont have the spec's of some parts atm.
Solder/Soldering skills are required!
Parts list:
2x 3mm leds (choose the color you like)
1 resistor for 9v power supply
wire for the led's, resistor and power switch
shrink wire
Toggle switch for cars (not small RC rx)
Optional 2x 3mm hex screws
You can use the screw blocks (included in the files pack) for the 2 screws but you can also leave the screws a 'dummy' inside the top plate because the top plate will snap in place the screws are not really necessary!

Tags