MacPi Tiny (Raspberry Pi Zero Case) by The_Craft_Dude

Last crawled date: 3 years, 1 month ago

(please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs )
This is a Raspberry Pi case, designed (as close as plausible for me) 1:2 to the mid 2010 Mac Mini.
(This case supports the Raspberry Pi Zero)
the case is designed to snap together, except for the bottom feet, that might need some glue to hold it in place, but there is a little cut out on the bottom of the bottom "shell" for aligning the part (the middle part might need some glue on the bottom, on the inside, to help it to keep in place.
please note, that the case is not designed to support a fan or heatsink.
Most printers should be able to print this case.
for detailed help on how to put the parts together, please refer to the pictures.
(The MacPi Mini and tiny is compared in size in the pictures, the other model can be found under my designs)
if there is any flaws or problems printing this, please let me know ^^