Thingiverse
M3D Quad Dump Bin
by Thingiverse
Last crawled date: 4 years, 2 months ago
So there are two versions of this dump-bin because I'm still testing this, Version 1 works good, the difference is version 2 is more adjustable in its placement along the Y axis in case you're not using stock methods of mounting your quad head to the X axis gantry plate.
This mod will work with stock quads, and Bowden converted quads, this will also work with a quad modded with or without a BLtouch as long as you haven't modded the Z-end-stop switch or way to touches makes contact with the Axis motor plate.
Version 1 (No Servo)
dump-bin.stl
Cover the slide portion with aluminum foil tape.
lightly coat with cooking oil.
dump-bin-box.stl
Use two zip tips to secure the box under the bin slide to catch filament.
dump-bin-box-gate.stl
insert into the box
There are two options for Version 1, I prefer Option 1.
I had good luck with both options, but option 1 works significantly better with PETG.
Option 1: dump-bin-inserts-washer.stl
Cover with aluminum foil tape
Insert an M4 washer sharp side down
lightly coat with cooking oil
insert into the dump bin
Option 2: dump-bin-insert-4-Metal-blade.stl
Cut a piece of .01 mm brass sheet so that it is 1-2mm above the top of the insert
1a. Reference photo for clarity on instructions.
1b. I used an old brass feeler gauge and cut it to size.
Tape in place with aluminum foil tape
lightly coat with cooking oil
insert into the dump bin
Hardware Required:
2x M5 40mm - 45 Bolts
2x M5 Nylock nuts
Aluminum foil tape
Option 1:
M4 Washer
Option 2:
.01mm metal sheeting (I brass to the stainless nozzle does not get scratched.)
Scripts:
Startscript - Simplify3d.txt
Endscript - Simplify3d.txt
ToolChange Script - Simplify3D - NoServo.txt
-OR-
ToolChange Script - Simplify3d - Brass Blade - No Servo.txt
(If using the blade version instead of the washer insert)
Please read the scripts and their comments you will have to make adjustments after you install and home your printer.
Insert scripts into your slicer for start, end, and tool change
If using the "Brass blade" instead of using the washer you can simply extrude 80-100mm of plastic then cut it off instead of chopping it off every 20mm in the tool change script.
the only thing that makes these files Simplify3d is the variables used to control the fan and temperatures.
Printer configs:
You'll need to edit your "M208 X0 Y0 Z0 S1 ; Set axis minima" to X-15 to place the home switch at -15 from the bed.
/sys/motion.g
You'll need to edit the following files to place nozzle in the center of the washer after homing, during pause, and after cancel.
/sys/homeall.g
/sys/pause.g
/sys/homex.g
/sys/cancel.g
Version 2 (No Servo):
dump-binv2-noservo.stl
Cover the slide portion with aluminum foil tape.
lightly coat with cooking oil.
dump-binv2-Washer-insert.stl
-OR-
dump-binv2-Washer-insert_r2.stl
("dump-binv2-Washer-insert_r2.stl" is untested, but is suppose to improve rigidity of the insert)
Cover with aluminum foil tape
Insert an M4 washer sharp side down
lightly coat with cooking oil
insert into the dump bin
dump-bin-box.stl
Use two zip tips to secure the box under the bin slide to catch filament.
dump-bin-box-gate.stl
insert into the box
Hardware Required:
2x M5 40mm - 45 Bolts
2x M5 Nylock nuts
Aluminum foil tape
1x M2 12mm Screw
1x M2 washer
Scripts:
Startscript - Simplify3d.txt
ToolChange Script - Simplify3D - No Servo.txt
Endscript - Simplify3d.txt
Please read the scripts and their comments you will have to make adjustments after you install and home your printer.
Insert scripts into your slicer for start, end, and tool change
the only thing that makes these files Simplify3d is the variables used to control the fan and temperatures.
Printer configs:
You'll need to edit your "M208 X0 Y0 Z0 S1 ; Set axis minima" to X-15 to place the home switch at -15 from the bed.
/sys/motion.g
You'll need to edit the following files to place the nozzle in the center of the washer after homing, during a pause, and after cancel.
/sys/homeall.g
/sys/pause.g
/sys/homex.g
/sys/cancel.g
Version 2 (With Servo - still testing)
This mod will work with stock quads, and Bowden converted quads, this will also work with a quad modded with or without a BLtouch as long as you haven't modded the Z-end-stop switch or way to touches makes contact with the Axis motor plate.
Version 1 (No Servo)
dump-bin.stl
Cover the slide portion with aluminum foil tape.
lightly coat with cooking oil.
dump-bin-box.stl
Use two zip tips to secure the box under the bin slide to catch filament.
dump-bin-box-gate.stl
insert into the box
There are two options for Version 1, I prefer Option 1.
I had good luck with both options, but option 1 works significantly better with PETG.
Option 1: dump-bin-inserts-washer.stl
Cover with aluminum foil tape
Insert an M4 washer sharp side down
lightly coat with cooking oil
insert into the dump bin
Option 2: dump-bin-insert-4-Metal-blade.stl
Cut a piece of .01 mm brass sheet so that it is 1-2mm above the top of the insert
1a. Reference photo for clarity on instructions.
1b. I used an old brass feeler gauge and cut it to size.
Tape in place with aluminum foil tape
lightly coat with cooking oil
insert into the dump bin
Hardware Required:
2x M5 40mm - 45 Bolts
2x M5 Nylock nuts
Aluminum foil tape
Option 1:
M4 Washer
Option 2:
.01mm metal sheeting (I brass to the stainless nozzle does not get scratched.)
Scripts:
Startscript - Simplify3d.txt
Endscript - Simplify3d.txt
ToolChange Script - Simplify3D - NoServo.txt
-OR-
ToolChange Script - Simplify3d - Brass Blade - No Servo.txt
(If using the blade version instead of the washer insert)
Please read the scripts and their comments you will have to make adjustments after you install and home your printer.
Insert scripts into your slicer for start, end, and tool change
If using the "Brass blade" instead of using the washer you can simply extrude 80-100mm of plastic then cut it off instead of chopping it off every 20mm in the tool change script.
the only thing that makes these files Simplify3d is the variables used to control the fan and temperatures.
Printer configs:
You'll need to edit your "M208 X0 Y0 Z0 S1 ; Set axis minima" to X-15 to place the home switch at -15 from the bed.
/sys/motion.g
You'll need to edit the following files to place nozzle in the center of the washer after homing, during pause, and after cancel.
/sys/homeall.g
/sys/pause.g
/sys/homex.g
/sys/cancel.g
Version 2 (No Servo):
dump-binv2-noservo.stl
Cover the slide portion with aluminum foil tape.
lightly coat with cooking oil.
dump-binv2-Washer-insert.stl
-OR-
dump-binv2-Washer-insert_r2.stl
("dump-binv2-Washer-insert_r2.stl" is untested, but is suppose to improve rigidity of the insert)
Cover with aluminum foil tape
Insert an M4 washer sharp side down
lightly coat with cooking oil
insert into the dump bin
dump-bin-box.stl
Use two zip tips to secure the box under the bin slide to catch filament.
dump-bin-box-gate.stl
insert into the box
Hardware Required:
2x M5 40mm - 45 Bolts
2x M5 Nylock nuts
Aluminum foil tape
1x M2 12mm Screw
1x M2 washer
Scripts:
Startscript - Simplify3d.txt
ToolChange Script - Simplify3D - No Servo.txt
Endscript - Simplify3d.txt
Please read the scripts and their comments you will have to make adjustments after you install and home your printer.
Insert scripts into your slicer for start, end, and tool change
the only thing that makes these files Simplify3d is the variables used to control the fan and temperatures.
Printer configs:
You'll need to edit your "M208 X0 Y0 Z0 S1 ; Set axis minima" to X-15 to place the home switch at -15 from the bed.
/sys/motion.g
You'll need to edit the following files to place the nozzle in the center of the washer after homing, during a pause, and after cancel.
/sys/homeall.g
/sys/pause.g
/sys/homex.g
/sys/cancel.g
Version 2 (With Servo - still testing)
Similar models
thingiverse
free
2" to 1.25" telescope adapter by MadsHall
...threaded brass inserts inserted with an soldering iron or similar m5 threaded brass inserts:...
thingiverse
free
UV Light Bracket for DIY Curing Box by gamla3d
...from all angles
materials:
uv light: $21
aluminum foil: $4
double-sided tape: $3.5
turntable (optional): $9
gamla 3d workshop
thingiverse
free
Bed Level Thumbscrew by PW-Sys
...s.com/item/100pcs-m3x5mm-l-5mm-od-metric-threaded-brass-knurl-round-insert-nuts-lxm/32693221350.html?spm=a2g0s.9042311.0.0.0vsdnu
thingiverse
free
E3D Toolchanger Spoolmount 12mm + Brass Inserts
...inal) hole for mounting a 12mm shaft.
5 degree angle
4mm holes intended for a 3mm brass insert
grub screw hole for securing shaft
thingiverse
free
Car cigarette lighter female plug 12V by 22steve22
...ything!
you just need:
1 m3 screw (with an optional washer)
some alluminum foil (the one used to cook)
some tape
good 3d print!
thingiverse
free
Cross stitch stand new v3 by Nero1171
... to complete it.
m5 7mm brass insert and m5 20mm bolt
m5 7mm brass insert and m5 40mm bolt
m4 6mm brass insert and m4 30mm bolt
thingiverse
free
Cross stitch stand new v3 by Nero1171
... to complete it.
m5 7mm brass insert and m5 20mm bolt
m5 7mm brass insert and m5 40mm bolt
m4 6mm brass insert and m4 30mm bolt
3dwarehouse
free
5/16' insert nut with bolts and washers
...ass insert nut is based on lee valley item 00m94.01 #18_tpi #516_insert_nut #brass #hexhead_bolt #knurled_texture #steel #washers
grabcad
free
wad inserting machine
...wad inserting machine
grabcad
wad inserting machine is a basic pharma which is commonly used
to insert aluminum foil in cap
thingiverse
free
M5, M4 and M3 nut and washer adaptors for 2020 extrusions. by brunofporto
...washer to interface with the m5 washer.
updates:
modified the m4 version to use a m5 washer for better grip.
added the m3 version
M3D
cg_studio
$12
ora M3d model
...ora m3d model
cgstudio
.3ds .c4d .obj - ora m 3d model, royalty free license available, instant download after purchase.
cg_studio
free
calabaz street M3d model
...baz street m3d model
cgstudio
.max - calabaz street m 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW X6 M3d model
...del
cgstudio
.3ds .fbx .lwo .max .obj .xsi - bmw x6 m 3d model, royalty free license available, instant download after purchase.
3d_export
$5
Gear wheel
...gear wheel 3dexport gear wheel in .m3d ...
3d_export
$5
Light bulb
...bulb 3dexport 3d model of a light bulb in m3d ...
3d_export
$5
stapler
...for animation. the archive contains the model formats in m3d stl, fbx,...
3d_export
$105
HONDA ACCORD 3D Model
...accord hq logo red car honda accord 3d model m3d 20442...
3d_export
$24
Clock 3D Model
...new designer eye clock elegant stylish clock 3d model m3d 21024...
3d_export
free
zis 5b
...the archive contains 2 files, one in the format .m3d and...
3dfindit
free
M3D
...m3d
3dfind.it
catalog: kap componentes elétricos
Dump
3d_export
free
dump
...dump
3dexport
dump low poly prop realistic bake
turbosquid
$19
Dump
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Bananas dump
...rbosquid
royalty free 3d model bananas dump for download as on turbosquid: 3d models for games, architecture, videos. (1644468)
turbosquid
$135
dump truck
...bosquid
royalty free 3d model dump truck for download as max on turbosquid: 3d models for games, architecture, videos. (1358889)
turbosquid
$25
Dump Truck
...squid
royalty free 3d model dump truck for download as blend on turbosquid: 3d models for games, architecture, videos. (1535082)
3d_ocean
$19
Dump Truck
...machinery motion road rubble saturn_74 stylized truck vehicle yellow
low poly stylized version of a dump truck! hope you like it!
turbosquid
$45
Dump Truck
...ty free 3d model dump truck for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1280179)
3d_export
$11
dump truck trailer
...dump truck trailer
3dexport
the dump truck trailer can be used with a tractor, truck and the like.
3d_export
$65
Dump car 3D Model
...dump car 3d model
3dexport
dump car
dump car 3d model modelix 59123 3dexport
turbosquid
$130
dump car
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Bin
archibase_planet
free
Bin
...in
archibase planet
bin refuse bin litter receptacle urn litter-bin
bin 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Bin
...in
archibase planet
bin refuse bin urn litter receptacle litter-bin
bin 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Bin
...in
archibase planet
bin refuse bin litter receptacle urn litter-bin
bin 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
bin urn trash refuse bin
bin n250914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
bin urn trash refuse bin
bin arhimet n240315 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
urn refuse bin litter-bin
trash bin 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
urn refuse bin litter-bin
trash bin 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...rchibase planet
refuse bin litter receptacle litter-bin
trash bin n130608 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
refuse bin litter receptacle litter-bin
trash bin 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bin
...bin
archibase planet
refuse bin litter receptacle litter-bin
trash bin 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.