M3 tarantula nut by juanfy

Last crawled date: 3 years ago

Hi everybody,
I wanted to share to you this design that is a remix of (other web) tarantula scan. I ve simplified, scaled and insert a nut socket inside.
There are 2 files:
Nut upper and nut embedded. Nut embedded is more cool design but you cant print it directly, you should pause at layer 74 and insert a m3 nut inside and then continue.
You can do the pause manually or split gcode or try some slicer option.
Nut upper can be printed without issue.
Print setup:
I recommend you to use a small nozzle and layer height.
I ve tried:
0,1 mm LH
50 mm/s
100% infill
abs
support touching bed
After print:
You ve to take your time carefull removing all the supports without breaking the legs (i ve used the tool in the pic)