Cults
Lynx - Fully 3D-printable 1/10 4wd buggy
by Cults
Last crawled date: 6 years, 1 month ago
I have designed a new buggy. The STL's can be purchased here: https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
Lynx will remain free. I appreciate donations if you want me to continue uploading free things. I appreciate it if you use my affiliate links to the parts below.
https://youtu.be/_fAOJI9BMSI
----
News - 12.11.2017
Added one piece chassis parts.
----
News - 21.08.2017
Added new wheels with countersunk holes on the inside for locking the printed tires with countersunk screws. The file is wheels03.stl
----
News - 16.08.2017
Changed the rear suspension arm and spindles to move the wheels farther away from the body and chassis. Also beefed up the front spindle in the upgrade set.
----
News - 05.08.2017
I made new lower suspension arms. They are stronger and don't rub on the wheels. The new parts are:
Armfront01.stl
Armrear01.stl
----
NEWS - 22.07.2017
https://youtu.be/j9Z--w-5pXA
I made upgrade kits for the front and rear drive shafts that use the Quanum Vandal CV shafts. This gives more suspension travel and steering lock than the stock plastic axles, and also doesn't wear every other run. I attached an exploded view of the assembly and some photos of the parts installed on the car. The set screw can be made by cutting a regular M4 screw, and the 2 mm pin can be made from piano wire or nylon filament if you don't want to buy them.
The new files are:
Upgradefrontshaft01.stl
Upgraderearshaft01.stl
Wheels02.stl
Parts list:
https://hobbyking.com/en_us/metal-center-drive-cups-1-10-quanum-vandal-4wd-racing-buggy.html
https://hobbyking.com/en_us/front-cvd-1-10-quanum-vandal-4wd-racing-buggy-2pcs.html
https://hobbyking.com/en_us/pins-10-2-1-10-quanum-vandal-4wd-racing-buggy-6pcs.html
https://hobbyking.com/en_us/m4x4-set-screws-8pcs-bsr1-8-rally.html
----
NEWS - 30.06.2017
Updated the diff gears with stronger version. Gears01 and Gears-belt01 have been updated, and Gears-update contains the updated gears by themselves.
----
NEWS - 29.06.2017:
I uploaded solid shock towers for higher strength.
----
This is my take on a high performance 3D-printable 4WD buggy. It's comparable to a late 80's to early 90's buggy really, with a cab forward look to it. My next buggy will be modern and better. It can be built with belt drive connecting the forward and rear gearboxes or using separate motors for the forward and rear gearboxes. It can also be built as a front wheel drive or rear wheel drive car off course, but that's not the intention. Parts that are required for the belt drive version are marked "belt".
Specs:
Wheelbase: ~278 mm
Total width outside tires: 256 mm
Rear toe: +2° (toe in)
Front toe: Approximately neutral to -1° (optionally adjustable)
Front caster: 3°
Rear caster: 0°
12mm hex
Ackerman compensation: Yes
Bump steer is eliminated.
Kingpin hinge line goes through the front tire contact patch.
Assembly notes:
The dual motor version fits standard length lipos or six cell ni-mh packs or smaller.
Belt drive chassis has longitudinal and transversal battery mounting options for weight distribution adjustment and fits standard length lipos and six cell or smaller ni-mh packs.
I have uploaded some exploded views of the more complicated parts. It's hard to assemble it incorrectly but they should help explain some parts. If it doesn't want to go together one way check to see what's wrong. I have printed and tested everything.
The car has a few optional suspension mounting points. It does not have a million options like most cars do. This is pointless as 99.99% of the users don't know what to do with them. ;) I don't expect any pros to use this car.
The knuckle drive joints require grease to work reliably and not melt. This is very important. They are a tight fit when new and this makes them last longer. It is important that the car is not raised to far off the ground or set up with too much suspension travel so that it extends the universal joints beyond their limit. I might add adapters to fit aftermarket steel CV and dogbones some time, but it will be weeks until I can get some. The current iteration of knucles have proven to be remarkably wear resistant, even with a crazy 4000 kv motor (not recommended).
The eccentric belt idlers are eccentric so that they can be rotated and locked in position to tension the belt that connects the front and rear gearbox. Use a short piece of filament between the idler pieces to align them before installing.
Lubricate all the gears in the gearboxes with grease. I use a cheap lithium grease for bicycles because that's what I have readily available. Do NOT lubricate the belt pulleys!
The bevel gears and the belt drive intermetiate gears have support rings built into the parts. Remove this ring from the gears before installation.
The small bevel gears in the differentials can use 9mm long pieces of 1,75 mm filament as axles. If the hole is too tight you can drill it out with a max 2 mm diameter drill. Other shaft materials can be used off course, and 2mm metal will be stronger, but filament is easiest to cut.
I use pieces of 3x22 mm brass tube or steel tube in the center of the diffs to keep them aligned. 3mm piano wire can be used but is harder to work with.
Cover the opening in the unused gearbox housing with aluminum tape to prevent dirt from entering it.
Electronics:
-Minimum 2 channel transmitter and receiver. This is the cheapest i can recommend:
https://www.banggood.com/Flysky-FS-GT2E-2CH-2_4G-RC-Controller-Transmitter-With-Receiver-p-1086215.html?p=HD240528697332015103
This is better:
https://www.banggood.com/RadioLink-RC4GS-2_4G-4CH-Car-Controller-Transmitter-R4FG-G-Gyro-Inside-Receiver-for-RC-Car-Boat-4-p-1169456.html?p=HD240528697332015103
-Up to 3000 kv brushless 540 motor and ESC recommended (or down to 21t brushed 540 motor):
https://www.banggood.com/Racing-60A-ESC-Speed-Controller-F540-3000KV-Brushless-Motor-For-110-112-RC-Car-p-1175462.html?p=HD240528697332015103
or:
https://www.banggood.com/540-Motor-60A-ESC-Carbon-Brushed-Shaft-3_175mm-For-110-RC-Car-p-1187528.html?p=HD240528697332015103
-A good servo:
https://www.banggood.com/JX-Servo-PDI-6208MG-8kg-Servo-120-Degrees-High-Precision-Metal-Gear-Digital-Standard-Servo-p-1070889.html?p=HD240528697332015103
-2S hard body lipo: https://www.banggood.com/Giant-Power-11_1V-6000mAh-3S-65C-Lipo-Battery-T-Plug-Hardcase-Pack-p-1080404.html?p=HD240528697332015103
Hardware:
-250 tooth 6mm wide 2mm pitch GT/gt2/gt3 belt - https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F152413083472
-20 pcs 12x18x4 ball bearings - https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338226872&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F20pcs-6701-2RS-6701-RS-12x18x4mm-Rubber-Sealed-Ball-Bearing-Miniature-Bearing-%2F120901748928
-Oil shocks are recommended:
https://www.banggood.com/WLtoys-K949-Front-Shock-Abosorber-2PCS-110-K949-10428-RC-Car-Parts-p-1170718.html?p=HD240528697332015103
or: http://www.ebay.com/itm/301840496027
-M3x30 mm turnbuckles are optional for adjustable tie rods and upper suspension
-2 mm piano wire to make hinges for the lower suspension arms. Cut to length.
-3 mm x 22 mm long brass or steel rod to make the center shafts in the differentials:
https://www.banggood.com/3x2x500mm-Stainless-Steel-Rod-Capillary-Tube-p-1058744.html?p=HD240528697332015103
-Tires if you don't want to print tires:
https://www.banggood.com/HSP-110-12mm-Hub-Wheel-Rim-Tires-For-RC-Off-Road-Buggy-66005-p-942114.html?p=HD240528697332015103
-Bicycle tubing for making rubber bands for the printable rubber band shocks:
https://www.banggood.com/Wholesale-Bicycle-Inner-Tire-700x35-43C-Inner-Tube-Road-Bike-Tyre-p-66792.html?p=HD240528697332015103
Screws:
13 pcs M2x8 screws - Gearbox housings and steering links
6 pcs M2x12 screws - Various suspension and steering
6 pcs M2x25 screws - Suspension arms installation
6 pcs M3x6 screws - Gearbox housing assembly
10 pcs M3x8 screws - Chassis joint, shockplates and wing mount
10 pcs m3x12 screws - Various shock and suspension attachment
4 pcs M3x20 screws - Motor installation
20 pcs M3x8 countersunk screws - Various chassis assembly
4 pcs M3x12 countersunk screws - Battery mounting posts
6 pcs M3x28 countersunk screws - Chassis bridge, belt idlers and belt pulleys
4 pcs M4x18 mm screws - Wheel attachment
Parts list:
Armfront01.stl - Lower front suspension arms
Armfront02.stl - Fixed upper front suspension arms
Armfront03.stl - Adjustable upper front suspension arms (requires m3x30mm turnbuckles)
Armrear01.stl - Lower rear suspension arms
Armrear02.stl - Fixed upper rear suspension arms
Armrear03.stl - Adjustable upper rear suspension arms (requires m3x30mm turnbuckles)
Battery01.STL - Battery hold down latch.
Battery02.STL - Posts for rubber band battery hold downs
Body01.STL - Forward body style01
Body02.STL - Rear body style01
Body03.STL - Forward body style02
Body04.STL - Rear body style02
Body05.STL - Forward body belt drive
Body06.STL - Rear body belt drive
Chassis01.STL - Forward chassis dual motor version
Chassis01-belt.STL - Forward chassis without motor cutouts
Chassis02.STL - Rear chassis dual motor version
Chassis02-belt.STL - Rear chassis for belt drive
Chassis03.STL - Chassis right center bridge
Chassis04-24mm.stl - Chassis left center bridge with 24mm wide servo mount
Chassis04-34mm.stl - Chassis left center bridge with 34mm wide servo mount
Chassis04-41mm.stl - Chassis left center bridge with 42mm wide (standard) servo mount
Chassis04-belt-24mm.STL - Chassis left center bridge with 24mm wide servo mount for belt drive
Chassis04-belt-34mm.STL - Chassis left center bridge with 34mm wide servo mount for belt drive
Chassis04-belt-41mm.STL - Chassis left center bridge with 41mm wide (standard) servo mount for belt drive
GBfront01.STL - Front gearbox housing for dual motor version
GBfront01-belt.STL - Front gearbox housing for belt drive version
GBrear01.STL - Rear gearbox housing for dual motor version
GBrear01-belt.STL - Rear gearbox housing for belt drive version
Gears01.STL - One gear set for dual motor version
Gears-Belt01.STL - One gear set for belt drive version
Idler01.stl - Eccentric belt idler for two 12x18x4 ball bearings
Shaft01.STL - Drive shafts
Pinion-16t.stl - 16 tooth 32dp pinion.
Pulley-belt01.stl - Pulley for front and rear belt version gearbox
Pulley-belt-overdrive01.STL - Optional smaller overdrive pulley for the front gearbox
Shock01.STL - Rubber band shocks
Shockplates01.STL - Shock mounting plates for rubber band shocks
Shockplates-aftermarket01.STL - Shock mounting plates for aftermarket shocks
Spindle01.STL - Axles for the wheel spindles and 12mm hex
Spindle02.STL - Front spindles
Spindle03.STL - Rear spindles
Steering01.STL - Parts for steering assembly
Steering02.STL - Tighter clevises in case original parts are too loose
Steering03.STL - Adjustable tie rods (requires m3x30mm turnbuckles)
Tirefront01.stl - Front tire with small knobs
Tirerear02.stl - Rear tire with large knobs
Tirefront01.stl - Front tire with small knobs
Tirerear02.stl - Rear tire with large knobs
Wheels01.STL - Wheels for standard 2.2" tires, or printable tires
Wing01.STL - Wing
Wingmount01.stl - Separate wing mounts
Lynx will remain free. I appreciate donations if you want me to continue uploading free things. I appreciate it if you use my affiliate links to the parts below.
https://youtu.be/_fAOJI9BMSI
----
News - 12.11.2017
Added one piece chassis parts.
----
News - 21.08.2017
Added new wheels with countersunk holes on the inside for locking the printed tires with countersunk screws. The file is wheels03.stl
----
News - 16.08.2017
Changed the rear suspension arm and spindles to move the wheels farther away from the body and chassis. Also beefed up the front spindle in the upgrade set.
----
News - 05.08.2017
I made new lower suspension arms. They are stronger and don't rub on the wheels. The new parts are:
Armfront01.stl
Armrear01.stl
----
NEWS - 22.07.2017
https://youtu.be/j9Z--w-5pXA
I made upgrade kits for the front and rear drive shafts that use the Quanum Vandal CV shafts. This gives more suspension travel and steering lock than the stock plastic axles, and also doesn't wear every other run. I attached an exploded view of the assembly and some photos of the parts installed on the car. The set screw can be made by cutting a regular M4 screw, and the 2 mm pin can be made from piano wire or nylon filament if you don't want to buy them.
The new files are:
Upgradefrontshaft01.stl
Upgraderearshaft01.stl
Wheels02.stl
Parts list:
https://hobbyking.com/en_us/metal-center-drive-cups-1-10-quanum-vandal-4wd-racing-buggy.html
https://hobbyking.com/en_us/front-cvd-1-10-quanum-vandal-4wd-racing-buggy-2pcs.html
https://hobbyking.com/en_us/pins-10-2-1-10-quanum-vandal-4wd-racing-buggy-6pcs.html
https://hobbyking.com/en_us/m4x4-set-screws-8pcs-bsr1-8-rally.html
----
NEWS - 30.06.2017
Updated the diff gears with stronger version. Gears01 and Gears-belt01 have been updated, and Gears-update contains the updated gears by themselves.
----
NEWS - 29.06.2017:
I uploaded solid shock towers for higher strength.
----
This is my take on a high performance 3D-printable 4WD buggy. It's comparable to a late 80's to early 90's buggy really, with a cab forward look to it. My next buggy will be modern and better. It can be built with belt drive connecting the forward and rear gearboxes or using separate motors for the forward and rear gearboxes. It can also be built as a front wheel drive or rear wheel drive car off course, but that's not the intention. Parts that are required for the belt drive version are marked "belt".
Specs:
Wheelbase: ~278 mm
Total width outside tires: 256 mm
Rear toe: +2° (toe in)
Front toe: Approximately neutral to -1° (optionally adjustable)
Front caster: 3°
Rear caster: 0°
12mm hex
Ackerman compensation: Yes
Bump steer is eliminated.
Kingpin hinge line goes through the front tire contact patch.
Assembly notes:
The dual motor version fits standard length lipos or six cell ni-mh packs or smaller.
Belt drive chassis has longitudinal and transversal battery mounting options for weight distribution adjustment and fits standard length lipos and six cell or smaller ni-mh packs.
I have uploaded some exploded views of the more complicated parts. It's hard to assemble it incorrectly but they should help explain some parts. If it doesn't want to go together one way check to see what's wrong. I have printed and tested everything.
The car has a few optional suspension mounting points. It does not have a million options like most cars do. This is pointless as 99.99% of the users don't know what to do with them. ;) I don't expect any pros to use this car.
The knuckle drive joints require grease to work reliably and not melt. This is very important. They are a tight fit when new and this makes them last longer. It is important that the car is not raised to far off the ground or set up with too much suspension travel so that it extends the universal joints beyond their limit. I might add adapters to fit aftermarket steel CV and dogbones some time, but it will be weeks until I can get some. The current iteration of knucles have proven to be remarkably wear resistant, even with a crazy 4000 kv motor (not recommended).
The eccentric belt idlers are eccentric so that they can be rotated and locked in position to tension the belt that connects the front and rear gearbox. Use a short piece of filament between the idler pieces to align them before installing.
Lubricate all the gears in the gearboxes with grease. I use a cheap lithium grease for bicycles because that's what I have readily available. Do NOT lubricate the belt pulleys!
The bevel gears and the belt drive intermetiate gears have support rings built into the parts. Remove this ring from the gears before installation.
The small bevel gears in the differentials can use 9mm long pieces of 1,75 mm filament as axles. If the hole is too tight you can drill it out with a max 2 mm diameter drill. Other shaft materials can be used off course, and 2mm metal will be stronger, but filament is easiest to cut.
I use pieces of 3x22 mm brass tube or steel tube in the center of the diffs to keep them aligned. 3mm piano wire can be used but is harder to work with.
Cover the opening in the unused gearbox housing with aluminum tape to prevent dirt from entering it.
Electronics:
-Minimum 2 channel transmitter and receiver. This is the cheapest i can recommend:
https://www.banggood.com/Flysky-FS-GT2E-2CH-2_4G-RC-Controller-Transmitter-With-Receiver-p-1086215.html?p=HD240528697332015103
This is better:
https://www.banggood.com/RadioLink-RC4GS-2_4G-4CH-Car-Controller-Transmitter-R4FG-G-Gyro-Inside-Receiver-for-RC-Car-Boat-4-p-1169456.html?p=HD240528697332015103
-Up to 3000 kv brushless 540 motor and ESC recommended (or down to 21t brushed 540 motor):
https://www.banggood.com/Racing-60A-ESC-Speed-Controller-F540-3000KV-Brushless-Motor-For-110-112-RC-Car-p-1175462.html?p=HD240528697332015103
or:
https://www.banggood.com/540-Motor-60A-ESC-Carbon-Brushed-Shaft-3_175mm-For-110-RC-Car-p-1187528.html?p=HD240528697332015103
-A good servo:
https://www.banggood.com/JX-Servo-PDI-6208MG-8kg-Servo-120-Degrees-High-Precision-Metal-Gear-Digital-Standard-Servo-p-1070889.html?p=HD240528697332015103
-2S hard body lipo: https://www.banggood.com/Giant-Power-11_1V-6000mAh-3S-65C-Lipo-Battery-T-Plug-Hardcase-Pack-p-1080404.html?p=HD240528697332015103
Hardware:
-250 tooth 6mm wide 2mm pitch GT/gt2/gt3 belt - https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F152413083472
-20 pcs 12x18x4 ball bearings - https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338226872&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F20pcs-6701-2RS-6701-RS-12x18x4mm-Rubber-Sealed-Ball-Bearing-Miniature-Bearing-%2F120901748928
-Oil shocks are recommended:
https://www.banggood.com/WLtoys-K949-Front-Shock-Abosorber-2PCS-110-K949-10428-RC-Car-Parts-p-1170718.html?p=HD240528697332015103
or: http://www.ebay.com/itm/301840496027
-M3x30 mm turnbuckles are optional for adjustable tie rods and upper suspension
-2 mm piano wire to make hinges for the lower suspension arms. Cut to length.
-3 mm x 22 mm long brass or steel rod to make the center shafts in the differentials:
https://www.banggood.com/3x2x500mm-Stainless-Steel-Rod-Capillary-Tube-p-1058744.html?p=HD240528697332015103
-Tires if you don't want to print tires:
https://www.banggood.com/HSP-110-12mm-Hub-Wheel-Rim-Tires-For-RC-Off-Road-Buggy-66005-p-942114.html?p=HD240528697332015103
-Bicycle tubing for making rubber bands for the printable rubber band shocks:
https://www.banggood.com/Wholesale-Bicycle-Inner-Tire-700x35-43C-Inner-Tube-Road-Bike-Tyre-p-66792.html?p=HD240528697332015103
Screws:
13 pcs M2x8 screws - Gearbox housings and steering links
6 pcs M2x12 screws - Various suspension and steering
6 pcs M2x25 screws - Suspension arms installation
6 pcs M3x6 screws - Gearbox housing assembly
10 pcs M3x8 screws - Chassis joint, shockplates and wing mount
10 pcs m3x12 screws - Various shock and suspension attachment
4 pcs M3x20 screws - Motor installation
20 pcs M3x8 countersunk screws - Various chassis assembly
4 pcs M3x12 countersunk screws - Battery mounting posts
6 pcs M3x28 countersunk screws - Chassis bridge, belt idlers and belt pulleys
4 pcs M4x18 mm screws - Wheel attachment
Parts list:
Armfront01.stl - Lower front suspension arms
Armfront02.stl - Fixed upper front suspension arms
Armfront03.stl - Adjustable upper front suspension arms (requires m3x30mm turnbuckles)
Armrear01.stl - Lower rear suspension arms
Armrear02.stl - Fixed upper rear suspension arms
Armrear03.stl - Adjustable upper rear suspension arms (requires m3x30mm turnbuckles)
Battery01.STL - Battery hold down latch.
Battery02.STL - Posts for rubber band battery hold downs
Body01.STL - Forward body style01
Body02.STL - Rear body style01
Body03.STL - Forward body style02
Body04.STL - Rear body style02
Body05.STL - Forward body belt drive
Body06.STL - Rear body belt drive
Chassis01.STL - Forward chassis dual motor version
Chassis01-belt.STL - Forward chassis without motor cutouts
Chassis02.STL - Rear chassis dual motor version
Chassis02-belt.STL - Rear chassis for belt drive
Chassis03.STL - Chassis right center bridge
Chassis04-24mm.stl - Chassis left center bridge with 24mm wide servo mount
Chassis04-34mm.stl - Chassis left center bridge with 34mm wide servo mount
Chassis04-41mm.stl - Chassis left center bridge with 42mm wide (standard) servo mount
Chassis04-belt-24mm.STL - Chassis left center bridge with 24mm wide servo mount for belt drive
Chassis04-belt-34mm.STL - Chassis left center bridge with 34mm wide servo mount for belt drive
Chassis04-belt-41mm.STL - Chassis left center bridge with 41mm wide (standard) servo mount for belt drive
GBfront01.STL - Front gearbox housing for dual motor version
GBfront01-belt.STL - Front gearbox housing for belt drive version
GBrear01.STL - Rear gearbox housing for dual motor version
GBrear01-belt.STL - Rear gearbox housing for belt drive version
Gears01.STL - One gear set for dual motor version
Gears-Belt01.STL - One gear set for belt drive version
Idler01.stl - Eccentric belt idler for two 12x18x4 ball bearings
Shaft01.STL - Drive shafts
Pinion-16t.stl - 16 tooth 32dp pinion.
Pulley-belt01.stl - Pulley for front and rear belt version gearbox
Pulley-belt-overdrive01.STL - Optional smaller overdrive pulley for the front gearbox
Shock01.STL - Rubber band shocks
Shockplates01.STL - Shock mounting plates for rubber band shocks
Shockplates-aftermarket01.STL - Shock mounting plates for aftermarket shocks
Spindle01.STL - Axles for the wheel spindles and 12mm hex
Spindle02.STL - Front spindles
Spindle03.STL - Rear spindles
Steering01.STL - Parts for steering assembly
Steering02.STL - Tighter clevises in case original parts are too loose
Steering03.STL - Adjustable tie rods (requires m3x30mm turnbuckles)
Tirefront01.stl - Front tire with small knobs
Tirerear02.stl - Rear tire with large knobs
Tirefront01.stl - Front tire with small knobs
Tirerear02.stl - Rear tire with large knobs
Wheels01.STL - Wheels for standard 2.2" tires, or printable tires
Wing01.STL - Wing
Wingmount01.stl - Separate wing mounts
Similar models
cults
free
Fan guard with feet for 120mm fan.
...d.com/220v-12cm-solder-absorber-fan-for-soldering-iron-ktv-cabinet-p-1106793.html?p=hd240528697332015103&cur_warehouse=cn
cults
$19
Mk Ultra - 3D printable 1/10 4wd buggy
...untersunk.
-6x m3x25 countersunk.
nuts:
-15x m3 nyloc.
-4x m4 nyloc
new option parts will appear as new free items on cults3d.
cults
free
Fully printable Monster Truck
...time. -though the hardware list calls for machine screws, similary sized self tapping screws will work fine in most...
cults
free
Mammut - Giant printer.
...chment:
https://www.banggood.com/10pcs-ac-250v-15a-v-156-1c25-spdt-roller-lever-micro-switch-p-944613.html?p=hd240528697332015103
cults
free
Oil shocks for 1/10 scale RC cars
...-10pcs-bag.html
new shock caps with holes for m2x8 screws to strengthen them and prevent them from cracking around the seal slot.
cults
free
Differential for OpenRC F1 car.
...n't have ball bearings.
diff01.stl - differential with 40 tooth spur gear.
diff02.stl - differential with 46 tooth spur gear.
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
80's van body for the Ursa monster truck
...
https://www.banggood.com/20w-electric-hot-melt-glue-gun-sticks-trigger-with-50-glue-sticks-p-961296.html?p=hd240528697332015103
cults
free
Fully Printable Fixed Pitch RC helicopter.
...for the swash plate: https://www.banggood.com/fs-racing-fs-53910-fs-53625-6pcs-582002-roll-bearing-10x15x4mm-110-rc-car-parts-p-1153527.html?p=hd240528697332015103 assorted #0 screws or similar self tapping 1-1,5mm diameter screws and ~6mm (~1/4") length....
cults
free
DC110 ABS FPV for SP F3 RACING EVO Brush Flight control
...t lipo
youtube test flight 2s: http://bit.do/video-youtube-brax-fpv-test-dc110-fpv-2s
https: // www .facebook.com / microdure /
Lynx
cults
free
Model of my Lynx velomobile.
...model of my lynx velomobile.
cults
model of my lynx velomobile.
model of my lynx velomobile.
cults
free
Lynx Helicopter cookie cutters
...lynx helicopter cookie cutters
cults
lynx helicopter cookie cutters
lynx helicopter cookie cutters
cults
$24
Replacement nose for the Vario LYNX
...ake on the top of the nose.
for a good walk around go here:
http://www.primeportal.net/hangar/jean_thomas_rembert/lynx_has.2_fn/
cults
$35
Vario Lynx 1:8 scale cockpit interior.
... cross tubes for the seat mechanism.
seat05 - floor clips for clipping on the seats. use 1.6 mm piano wire between the seat lugs.
cults
$14
Scale helicopter seats. Westland Lynx 1:8 seats.
... with headrest.
seat03.stl - pillow, emergency seat pack and tray for the seat pack.
seat04.stl - shafts for the seat mechanism.
cults
$23
Vario Lynx 1:8 scale cabin and cockpit doors.
... door handles and emergency release handles.
video of door removal and installation:
https://www.youtube.com/watch?v=mzdk6oaexa8
cults
free
Revell 1:32 Lynx Has.3 conversion kit from folding tail to fixed tail.
...oto shows the styrene parts. it will go on a flying rc converted kit, not a static display kit, so some scale compromises are ok.
cults
$23
Vario Lynx 1:8 external scale detail parts.
...center antenna.
hf02.stl - middle and rear hf antenna posts.
anticollision01.stl - anti collision lights for the top of the tail.
cults
$7
carisma SCA-1E lynx LYNXorv crawler armor zombie apocalypse
...ook zombies hunter
contains
a windshield shield
2 front glass shields
2 rear window shields
2 rear-facing glass shields
cults
$1
Conversion kit for making a flyable Revell 1:32 Westland Lynx kit.
...ghts until there is no coupling between roll and pitch:
https://youtu.be/vuhctazcsxa
my lynx now flies great at around 3200 rpm.
4Wd
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
$19
Mk Ultra - 3D printable 1/10 4wd buggy
...untersunk.
-6x m3x25 countersunk.
nuts:
-15x m3 nyloc.
-4x m4 nyloc
new option parts will appear as new free items on cults3d.
cults
free
Wing for Schumacher CAT XLS
...wing for schumacher cat xls cults 4wd buggy cat rc car re-release schumacher vintage wing masami...
cults
free
Oil shocks for 1/10 scale RC cars
...to center. these shocks fit the mkultra buggy perfectly: https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wdbuggy the zip file contains a pdf with assembly instructions...
cults
free
Glueless 1/10 RC car wheels
...rear wheel use. the front wheel is mainly for 4wd but fit 2wd cars with 12mm hex as well....
cults
free
TAMIYA BOOMERANG 1:24 scale kit for SUBOTECH
...1:24 scale kit for subotech cults 1:10 1:20 1:24 4wd 4x4 abs boomerang brushless buggies buggy classic collectibles collection...
cults
free
TAMIYA BIGWIG 1:24 scale kit for SUBOTECH
...1:24 scale kit for subotech cults 1:10 1:20 1:24 4wd 4x4 abs boomerang brushless buggies buggy classic collectibles collection...
cults
free
TAMIYA HOTSHOT 1:24 scale kit for SUBOTECH
...hotshot 1:24 scale kit for subotech cults 1:10 1:24 4wd 4x4 abs body brushed buggies buggy car cars classic...
cults
free
TAMIYA NISSAN KING CAB 1:24 scale kit for WL-Toys A212
...1:24 scale kit for wl-toys a212 cults 1:24 2.4ghz 4wd 4x4 a212 banggood bigfoot brushed buggy classic contol dasmikro...
Buggy
cults
free
3DRacers - Buggy
...3dracers - buggy
cults
3dracers - buggy
3dracers - buggy
cults
free
Wheel for Baja Buggy
...wheel for baja buggy
cults
wheel for baja buggy.
purchase filament used in this 3d print!
cults
free
Luna City Police Buggy (Moon Patrol!)
...luna city police buggy (moon patrol!)
cults
luna city police buggy (moon patrol!)
luna city police buggy (moon patrol!)
cults
$3
Rally Buggy Scale model
...rinting process. i have included a complete model in case you might want to try a different division or other 3d printing method.
cults
$5
Demo Hawk Buggy scale model
...l the parts are watertight and has been aligned for easy 3d printing process.
sample printed model by: @ hill3d on instagram
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...97t gears are included. 48dp.
mkultra can be downloaded here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
cults
free
3DRC 2WD Buggy 1:16 Car
...th standard 1/16 scale shocks. i have also included 3d printable ones, but these only work with petg plastic and have no damping.
cults
$19
Mk Ultra - 3D printable 1/10 4wd buggy
...untersunk.
-6x m3x25 countersunk.
nuts:
-15x m3 nyloc.
-4x m4 nyloc
new option parts will appear as new free items on cults3d.
cults
$1
Steering servo housing Rc 1/18
...steering servo housing rc 1/18 cults rc car buggy truggy model because steering servo case. inside dimensions. 35.93...
Rc
cults
free
RCS Malebot
...rcs malebot
cults
rcs malebot
rcs malebot
cults
free
RCS Hex Chain
...rcs hex chain
cults
rcs hex chain
rcs hex chain
cults
free
RCS Tree Ornaments
...rcs tree ornaments
cults
rcs tree ornaments
rcs tree ornaments
cults
free
RC Plane Stand
...rc plane stand
cults
rc plane stand
rc plane stand
cults
free
Skis for RC planes
...skis for rc planes
cults
skis for rc planes
skis for rc planes
cults
free
RCS Vacuum mold
...rcs vacuum mold
cults
rcs vacuum mold
rcs vacuum mold
cults
$2
Rc dashboard ladybug / beetle for RC 1/10
... drift scale beetle vw classic car rc car
dashboard and fly for rc 1/10 tamiya ladybug / bettle
attention to l scale of the fly
cults
$21
Flying Wings RC
...flying wings rc
cults
flying wings rc
cults
$3
Nitro RC horns
...nitro rc horns
cults
aileron modeling rc traxxas
3d model of an aleron for an automodelo rc 1/10 or 1/8.
cults
free
RC model engine
...rc model engine
cults
this is a mockup of an enya rc model engine.
Fully
cults
free
fully customizable openscad fanguard
...fully customizable openscad fanguard
cults
fully customizable openscad fanguard
fully customizable openscad fanguard
cults
free
Fully Printed Altoids Tin
...f my future projects, the dimensions match the original tin. (i forgot who requested this from me, plz remind me if you see this)
cults
free
Wall-E Robot - Fully 3D Printed
...wall-e robot - fully 3d printed
cults
wall-e robot - fully 3d printed
wall-e robot - fully 3d printed
cults
free
Fully Fabbable Tennis table paddles
...ts
this thing was designed to be fully fabbable: the handles are 3d printable and the racket can be cnc milled or laser cutted.
cults
free
First Take Off of a fully printed (FDM) sailplane.
...nted (fdm) sailplane.
cults
first take off of a fully printed (fdm) sailplane.
first take off of a fully printed (fdm) sailplane.
cults
free
SPOOL HOLDER (Fully Adjustable)
...ems required 25mm od tube 22mm id
!don't forget to check out my other designs and follow my weekly kookoo uploads, enjoy ;)
cults
free
"Red Swan" the biggest fully printed Flying Wing
...lts
"red swan" the biggest fully printed flying wing
"red swan" the biggest fully printed flying wing
cults
free
VR headset (fully 3D printed)
...been increased at 140mm approximately.
components and print list on: http://horizonlab.co/2017/05/28/vr-headset-fully-3d-printed
cults
free
Hand Brush fully printed
...ter on.
to use it, you have to cut the hair at the on the small side with a knife. please give me feedback an post you made one.
cults
free
"Red Duck" First Take Off of a fully printed flying wing.
...duck" first take off of a fully printed flying wing.
"red duck" first take off of a fully printed flying wing.
Car
cults
free
Car Wheel, Well Car
...car wheel, well car
cults
car
pdf and plan piece made by config on solidworks
cults
free
Garage cars
...garage cars
cults
cars car arrangement box
car storage garage
cults
$4
Little Car
...little car
cults
little car
little car
cults
free
EUMAKERS' Car - Toy car
... of available colours, so have fun customising your eumakers' car!
designed by: [serena fanara](http://www.serenafanara.it/)
cults
$1
Car keychain
...car keychain
cults
new design keychain 4 * 4 car
cults
free
Sports Car pull-back car toy
...sports car pull-back car toy
cults
car_toyn pull-back car sports_car toys
my 123d design portfolio - sports car pull-back toy
cults
free
Puzzle car
...puzzle car
cults
puzzle poly because make
make your car
cults
$4
homer car the homero car
...sis (only supports for the chassis)
any comments are welcome! have fun printing !!
final size of the model 18 cm approx
cults
free
Car pencil pot / Car pencil box
...car pencil pot / car pencil box
cults
pot toy pencil
achievements of a pencil pot in the shape of a car.
cults
free
car mockups
...ckups
cults
hubcaps model car
realization of two type hubcap for car model diameter 100 mm height 40 mm printed scale 0.1 and 0.2
10
cults
free
Sphere Box 10
...sphere box 10
cults
sphere box 10
sphere box 10
cults
free
Bump Vase 10
...bump vase 10
cults
bump vase 10
bump vase 10
cults
free
Trophy Riser 10
...trophy riser 10
cults
trophy riser 10
trophy riser 10
cults
free
Arrayed Vase 10
...arrayed vase 10
cults
arrayed vase 10
arrayed vase 10
cults
free
UniCoFil-Vase-10
...unicofil-vase-10
cults
unicofil-vase-10
unicofil-vase-10
cults
free
Leaf Vase 10
...leaf vase 10
cults
leaf vase 10
leaf vase 10
cults
free
Light cage 10
...light cage 10
cults
light cage 10
light cage 10
cults
free
10 sided dice
...10 sides
10-sided dice with or without number according to your desire of personalization. possibility to customize it on request
cults
$29
Vans RV-10
...ans rv-10 3d print model
vans rv-10 ready for 3d printing.
use the "scale" option to resize the model to your liking.
cults
free
10-penny propeller spinner
...10-penny propeller spinner
cults
spinner 10-penny propeller
10-penny propeller spinner
Printable
cults
free
Lisa the printable skull
...lisa the printable skull
cults
lisa the printable skull
lisa the printable skull
cults
$20
Printable Architectural Kit 1
...printable architectural kit 1
cults
printable architectural kit 1
printable architectural kit 1
cults
free
Grevious Printable
...grevious printable
cults
just fixed it up so you could print this awesome creation by vfxbase out.
cults
$11
Printable Architecture Kit House 1
...printable architecture kit house 1
cults
printable architecture kit house 1
printable architecture kit house 1
cults
free
Boat (with Impeller) - spiral vase printable
...impeller) - spiral vase printable
cults
boat (with impeller) - spiral vase printable
boat (with impeller) - spiral vase printable
cults
free
Kataraman (with impeller) - spiral vase printable
...- spiral vase printable
cults
kataraman (with impeller) - spiral vase printable
kataraman (with impeller) - spiral vase printable
cults
free
roller bearing printable
...autocad file for editing on thingiverse.
.
.
cults
free
Impeller Boat RC - spiral vase printable
...impeller boat rc - spiral vase printable
cults
impeller boat rc - spiral vase printable
impeller boat rc - spiral vase printable
cults
free
Motor Boat RC - spiral vase printable
...motor boat rc - spiral vase printable
cults
motor boat rc - spiral vase printable
motor boat rc - spiral vase printable
cults
free
Planter - 3D Printable Mold or Planter
...le mold for a concrete planter. full set of instructions are available here:
https://www.adylinn.com/blog/2017/concrete-planter
1
cults
free
Bracelet No 1
...bracelet no 1
cults
bracelet no 1
bracelet no 1
cults
free
Hook, +1
...hook, +1
cults
hook +1
hook, +1
cults
free
Pokale 1-3, Winnercup 1 - 3
...pokale 1-3, winnercup 1 - 3
cults
pokale 1-3 winnercup 1 - 3
pokale 1-3, winnercup 1 - 3
cults
free
Super Mario Bros World 1-1
...super mario bros world 1-1
cults
super mario bros world 1-1
super mario bros world 1-1
cults
free
Pythagoras Tree (1:1:Sqrt2)
...ap a little bit. the structure is very easy to design in 123d design using the basic idea of similarity. yes, this is a fractal.
cults
$1
Bowl 1
...bowl 1
cults
bowl household mug bread kitchen go flagon
bowl 1
cults
free
Wind Vase 1
...wind vase 1
cults
wind vase 1
wind vase 1
cults
free
magnet mushroom 1
...magnet mushroom 1
cults
mushroom magnet 1
magnet mushroom 1
cults
free
3D Fabric 1
...3d fabric 1
cults
3d fabric 1
3d fabric 1
cults
free
Pumpkin Vase 1
...pumpkin vase 1
cults
pumpkin vase 1
pumpkin vase 1