Thingiverse
LulzBot Fan by LulzBot
by Thingiverse
Last crawled date: 3 years ago
Printed with a LulzBot Mini 2 3D printer:
https://shop.lulzbot.com/lulzbot-mini-v2-0-boxed-for-retail-na-kt-pr0047na?ref=KT-PR0047NA
Here’s a breezy print to help with those hot summer days ahead!
Print 12 to 14 fan blades depending on how full you want your fan.
To assemble you’ll need:
20 inches of 3mm ribbon
A scrap of 2.85mm filament
After printing all your fan blades, put a piece of filament through all the fan blades making sure they line up properly. Preheat your Tool Head nozzle to the temperature that's appropriate for your filament, and rub one end of the filament against the hot nozzle and quickly push it flat against your bed. Repeat for the other side so it's secure. You can repeat this step if you need to make your joint tighter.
Next take your ribbon and start to weave the fan together. It’s easier to go from the rightmost blade that rests on top of all the other blades. Start with your ribbon underneath and pulling it towards you, then snake through the neighboring hole pulling away from yourself. Repeat till you snake through the final hole. You can either choose to leave the ribbon loose like we did to have the option to tie it, or use a little bit of glue to secure the ends.
https://shop.lulzbot.com/lulzbot-mini-v2-0-boxed-for-retail-na-kt-pr0047na?ref=KT-PR0047NA
Here’s a breezy print to help with those hot summer days ahead!
Print 12 to 14 fan blades depending on how full you want your fan.
To assemble you’ll need:
20 inches of 3mm ribbon
A scrap of 2.85mm filament
After printing all your fan blades, put a piece of filament through all the fan blades making sure they line up properly. Preheat your Tool Head nozzle to the temperature that's appropriate for your filament, and rub one end of the filament against the hot nozzle and quickly push it flat against your bed. Repeat for the other side so it's secure. You can repeat this step if you need to make your joint tighter.
Next take your ribbon and start to weave the fan together. It’s easier to go from the rightmost blade that rests on top of all the other blades. Start with your ribbon underneath and pulling it towards you, then snake through the neighboring hole pulling away from yourself. Repeat till you snake through the final hole. You can either choose to leave the ribbon loose like we did to have the option to tie it, or use a little bit of glue to secure the ends.
Similar models
thingiverse
free
Lulzbot Mini 30mm Hot End Cooling Fan by littlelocos
... it was inspired by killacycle's taz, however, it has been redesigned to work with a 30mm fan with a smooth air duct. enjoy!
thingiverse
free
Anet A8 Adjustable directional Hot end fan nozzle by dna001
...e directional hot end fan nozzle by dna001
thingiverse
adjustable directional hot end fan nozzle, get the air were you need it.
thingiverse
free
Lulzbot TAZ Extended / Adjustable Nozzle Fan Duct for e3D / hexagon hot ends by SuperSolid_3D
...re you can slide it up and down for adjustment, and doesn't require heat-set insert nuts for mounting the fan with m3 screws.
thingiverse
free
Mini Jacobs Ladder by gkitt
... is super easy and fun to make. all you need is some ribbon, some blocks (3d printed or other), hot glue, and you are off! enjoy!
thingiverse
free
Lulzbot TAZ Fan Dual Duct with Tap ready holes by Makuna
... metal hot end for your taz4, then this modified fan duct is not needed as it has a separate fan that cools the hot end directly.
thingiverse
free
Fan Pulls by vsp4dutchb
... fans. you will need to have something an the end of the chain to hold the pull in place. i used a ball chain coupler at the end.
thingiverse
free
Dual Duct Halo_Lulzbot Taz 4 by OpenEdgeDesign
... to get it out there so others can use it.the four holes that the fan mounts to need to be drilled and taped for a m3 x .5 screw.
thingiverse
free
Nozzle + Bottom Cover - Ender 6 by PowerSage
... sure it is open enough for airflow.
let me know if this doesn't fit right and i can make small modifications to make it fit.
thingiverse
free
Fan Shroud for Turnigy Fabrikator 3D + metal hot end by joop1987
...ront. it uses the original mounting screw holes. the bottom plate doesn't let air on the nozzle and won't cool off abs.
thingiverse
free
FoldaRap Nozzle Cooling FAN by Okatake
...that are emitted from the hot end.
※:this is used to print together used to wear a mounter to fix the "x-carriage".
Lulzbot
thingiverse
free
LulzBot Rocktomek by LulzBot
...lulzbot rocktomek by lulzbot
thingiverse
https://download.lulzbot.com/3d_models/rocktomek/
thingiverse
free
THE Lulzbot spool holder
...the lulzbot spool holder
thingiverse
stl and ipt topmount spool holder for lulzbot
thingiverse
free
Lulzbot logo by Halg199703
...lulzbot logo by halg199703
thingiverse
this is the lulzbot logo. i also have a file for dual extruder.
thingiverse
free
LulzBot Bio printer Model
...lulzbot bio printer model
thingiverse
this is a model of the lulzbot bioprinter
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
Lulzbot Spool Holder by MAKE
...lulzbot spool holder by make
thingiverse
a spool holder for your lulzbot.
thingiverse
free
Lulzbot mini spool holder by chewie80524
...lulzbot mini spool holder by chewie80524
thingiverse
this part holds the spool on a lulzbot mini. this design came from lulzbot.
thingiverse
free
Lulzbot Claystruder by 102drewt
...r for the lulzbot taz 4. every thing is snap together, and it only requires a threaded rod, a nut to fit it, and a stepper motor.
thingiverse
free
Lulzbot Mini Enclosure brackets by chewie80524
...lulzbot mini enclosure brackets by chewie80524
thingiverse
lulzbot taz/mini enclosure brackets.
thingiverse
free
Lulzbot mini toolbox by nicsna
...t mini using cura scale down to 0.97.
hope you like it and make sure to leave some feedback or suggestions for my next design. :)
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)