Thingiverse
LS-30 replacement handle for the Happ Rotary Joystick by PL1
by Thingiverse
Last crawled date: 3 years ago
Originally posted on the Build Your Own Arcade Controls (BYOAC) forums.
http://forum.arcadecontrols.com/index.php/topic,158253.0.html
The photos above are in the same order as the text below.
Do you want the look and feel of an LS-30 handle for your Happ Rotary Joystick?
(01-Replacement handle installed.jpg)
If so, this is the thread for you. :)
All 3D printed parts in this project are easy to customise by changing the related variable(s) in OpenSCAD.
The code is extensively commented to make it easy to understand, modify, and reuse.
Original LS-30 handle next to the printed version.
(02-Handles side-by-side.jpg)
Special thanks to 8BitMonk for loaning me an LS-30 handle. :cheers
Tools:
3d printer
Drill press
4mm and 5mm drill bits
Calipers (preferably metric)
Allen wrenches
Metal saw or cutting bit
Files
Hardware:
10mm shaft (~105-125mm per stick, depending on panel thickness)https://www.amazon.com/500mm-Cylinder-Linear-Optical-Accuracy/dp/B01N7RXCOQ/
20x10x10 shaft collarhttps://www.amazon.com/SC45CS10-Carbon-Steel-Collars-Outsize/dp/B074BV3GYH/
5mm-0.80 x 10mm metric setscrewhttps://www.menards.com/main/tools-hardware/fasteners-fastener-accessories/screws/specialty-screws-accessories/5mm-0-80-x-10mm-metric-socket-set-screws-1-pcs/p-1444440045536-c-8938.htm
3D print-coating epoxy (optional)https://www.amazon.com/gp/product/B00PFXK4JY/
Threaded inserts for mounting the joystick in a wood panelhttp://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=70&products_id=317
Software:
OpenSCADhttp://www.openscad.org/
Inkscape (optional)https://inkscape.org/en/
Inkscape to OpenSCAD converter plugin (optional)https://www.thingiverse.com/thing:24808
LS-30 handle measurements
8BitMonk provided the clearance measurements and panel thickness from his Ikari Warriors cab. :applaud: :notworthy:
Most of the remaining handle measurements were straight-forward.
The difficult part was measuring the tiny curve on the vertical edges of the octagon.
Most fillet gauges are designed to measure a curve where the faces are at 90 degrees.
(03-Fillet gauge right angle.jpg)
To measure the curve on an octagon where the faces are at 135 degrees, I designed some small octagonal fillet gauges.
https://www.thingiverse.com/thing:2924356
(04-Fillet Gauge X-Small.png)
Happ Rotary measurements
Once again, the measurements were pretty straight-forward.
(05-Happ Rotary Parts.jpg)
The 38mm distance from the actuator/coupler (P/N 96-1012-00) setscrew hole to the base of the pivot cone (P/N 96-1302-00) is a critical distance to ensure that the actuator is at the right height to engage the microswitches and keep the right tension on the centering spring.
To match that distance, the replacement handle and shaft cover has to stop the pivot cone where the shoulder on the original shaft (P/N 95-1274-00) did.
(06-Original and replacement shafts.jpg)
The top of the pivot cone is 2.5mm below the top of the joystick body.
(07-LS-30 Handle Measurements.jpg)
Fabricating the shaft
Make a horizontal mark at 4.2mm for the first hole.
One way to do that is to paint part of the shaft with a Sharpie, set your calipers to 4.2 mm, barely rest one jaw on the end, and roll the shaft so the tip of the other jaw leaves a scratch.
(08-Sharpie and Scratch 1.JPG) (09-Sharpie and Scratch 2.JPG)
Drill a 4mm hole, 4mm deep, 4.2mm from the end of the shaft.
Measure and mark the distance from the center of the first hole to the center of the shaft collar setscrew.
That distance = 55mm + the estimated shaft cover height from this list:
-- 19.7mm shaft cover for a metal panel
(15.6mm above + 1.6mm panel + 2.5mm under)
-- 37.2mm shaft cover for 3/4" MDF
(15.6mm above + 19.1mm panel + 2.5mm under)
-- 34mm for a 5/8" wood panel
-- 30.8mm for a 1/2" wood panel
If you plan on using threaded inserts like the ones from GGG to mount your joystick, you may want to add an extra mm for the flange.
For a 3/4" MDF panel with GGG-style threaded inserts, there should be 93.2mm (55mm + 37.2mm + 1mm) between the centers of the holes.
Drill a 5mm hole or grind a 5mm flat ~2mm deep for the shaft collar setscrew
Must be deep enough for the setscrew to be flush with the handle and shallow enough for the setscrew to transfer torque to the shaft
Go an extra mm deeper if you want to cover the setscrew hole with LS30_Setscrew_Cover.scad.
The distance between the bottom edge of the 4mm hole (step 1) and the top of the setscrew flat/hole (step 3) minus 59.5mm (60.5mm if you're using GGG-style inserts) = the actual printed shaft cover height
This ensures the correct amount of joystick spring tension
Cut the top of the shaft 24-25mm from center of the shaft collar set screw hole/flat
(10-Drilled shaft.jpg)
When the handle is assembled, there should be 38mm from the base of the pivot cone to the center of the 4mm screw hole
(11-Fabricating the Shaft.jpg)
Test print for hardware fit
LS30_Test_Print.scad allows you to check if your Shaft Collar, Set Screw, and Shaft will work with the following variables:
-- ShaftDiameter
-- ShaftCollarHeight
-- ShaftCollarOuterDiameter
-- SetScrewDiameter
Open the file in OpenSCAD.
Make any desired changes to the variables on lines 17 thru 22.
There must be a ";" after the variable.
-- Think of it like the game "Simon Says". No ";" = not saying "Simon says" = don't do it.
"//" indicates a comment or disabled code.
Preview
(toolbar icon or F5)
If there is a syntax error like a missing ";", preview will crash and flag the next line of code
Render
(toolbar icon or F6)
Prepares the object for export.
Export as STL
(toolbar icon or File -- Export -- Export as STL . . .)
Print the .STL file
Print parts:
Handle
Shaft cover
Setscrew cover (optional)
Ikari Warriors dust washer https://www.thingiverse.com/thing:3094055 (optional + you might want to paint it)
Like before, open the .scad file, change variables as desired, preview, render, export as .STL, and print the .STL file.
(12-Printed parts.jpg)
Assemble the handle:
Insert and tighten the setscrew so it is completely inside the shaft collar.
(13-Setscrew inside.jpg)
Align setscrew/hole and insert the shaft collar into the handle.
(14-Shaft collar aligned.jpg)
Loosen the setscrew through the setscrew hole in the handle.
-- If the hole is tight enough to engage the threads on the setscrew, you want it to cut threads from the inside out.
Insert the shaft into the shaft collar and handle.
Tighten the setscrew.
Hold the setscrew cover by the stem to test-fit the cover thickness. You may need to sand it or print a thicker cover. (optional)
(15-Setscrew cover test-fit.jpg)
Insert the setscrew cover. (optional)
Apply print smoothing epoxy to the handle, shaft cover, and dust washer. Allow to cure fully. (optional)
Install shaft cover.
Install dust washer.
Install pivot cone with the narrow side toward the handle.
(16-Handle assembly.jpg)
Insert the handle into the body of the joystick
Brace the handle against the tabletop and press down on the body to expose the setscrew hole.
Put the arm loop over the post and place the actuator/coupler on the shaft.
Align the hole/setscrew and tighten.
Rotary encoder options:
KADE miniArcade 2.0 firmware (rotary + keyboard buttons, two sticks)http://forum.arcadecontrols.com/index.php/topic,154126.0.html
-- Runs on your choice of 32u4 AVRs
--- MattairTech MT-DB-U4
--- Arduino Leonardo Micro
--- Arduino Leonardo Pro Micro has some pins/ports not connected so it can only handle one joystick
GGG GP-Wiz40 (rotary + gamepad buttons, two sticks)
Ultimarc Rotary encoder board (rotary only, you'll need a separate encoder for the buttons and joystick microswitches, fixed keystroke outputs, two sticks)
Ultimarc U-HID (rotary + keyboard or gamepad buttons)
-- Need to wire 4 diodes to convert the 12-position rotary switch into a quadrature (mouse) waveform.
KADE miniArcade firmware (original)
-- Minimus AVRs are hard to find
Mechanical Rotary Joystick Games:
Battle Field (Japanese version of Time Soldiers)
Bermuda Triangle
Dogou Souken a.k.a. Dogosoken (Japanese version of Victory Road)
Downtown
Gondomania
Guerilla War
Guevara (Japanese version of Guerrilla War)
Heavy Barrel
Ikari III - The Rescue (This is the only rotary game that uses three player buttons.)
Ikari Warriors
Jackal (Japanese version of Top Gunner)
Makyou Senshi (Japanese version of Gondomania)
Midnight Resistance
SAR - Search And Rescue
T.N.K. III
Time Soldiers
Top Gunner (bootleg)
Victory Road
World Wars
MAME Settings for Mechanical Rotary Joysticks
For mechanical rotary games:
Input (this Game) menu
Positional Analog to none
Analog Control menu
Positional Digital Speed = 0
Positional Sensitivity = 100
Scott
http://forum.arcadecontrols.com/index.php/topic,158253.0.html
The photos above are in the same order as the text below.
Do you want the look and feel of an LS-30 handle for your Happ Rotary Joystick?
(01-Replacement handle installed.jpg)
If so, this is the thread for you. :)
All 3D printed parts in this project are easy to customise by changing the related variable(s) in OpenSCAD.
The code is extensively commented to make it easy to understand, modify, and reuse.
Original LS-30 handle next to the printed version.
(02-Handles side-by-side.jpg)
Special thanks to 8BitMonk for loaning me an LS-30 handle. :cheers
Tools:
3d printer
Drill press
4mm and 5mm drill bits
Calipers (preferably metric)
Allen wrenches
Metal saw or cutting bit
Files
Hardware:
10mm shaft (~105-125mm per stick, depending on panel thickness)https://www.amazon.com/500mm-Cylinder-Linear-Optical-Accuracy/dp/B01N7RXCOQ/
20x10x10 shaft collarhttps://www.amazon.com/SC45CS10-Carbon-Steel-Collars-Outsize/dp/B074BV3GYH/
5mm-0.80 x 10mm metric setscrewhttps://www.menards.com/main/tools-hardware/fasteners-fastener-accessories/screws/specialty-screws-accessories/5mm-0-80-x-10mm-metric-socket-set-screws-1-pcs/p-1444440045536-c-8938.htm
3D print-coating epoxy (optional)https://www.amazon.com/gp/product/B00PFXK4JY/
Threaded inserts for mounting the joystick in a wood panelhttp://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=70&products_id=317
Software:
OpenSCADhttp://www.openscad.org/
Inkscape (optional)https://inkscape.org/en/
Inkscape to OpenSCAD converter plugin (optional)https://www.thingiverse.com/thing:24808
LS-30 handle measurements
8BitMonk provided the clearance measurements and panel thickness from his Ikari Warriors cab. :applaud: :notworthy:
Most of the remaining handle measurements were straight-forward.
The difficult part was measuring the tiny curve on the vertical edges of the octagon.
Most fillet gauges are designed to measure a curve where the faces are at 90 degrees.
(03-Fillet gauge right angle.jpg)
To measure the curve on an octagon where the faces are at 135 degrees, I designed some small octagonal fillet gauges.
https://www.thingiverse.com/thing:2924356
(04-Fillet Gauge X-Small.png)
Happ Rotary measurements
Once again, the measurements were pretty straight-forward.
(05-Happ Rotary Parts.jpg)
The 38mm distance from the actuator/coupler (P/N 96-1012-00) setscrew hole to the base of the pivot cone (P/N 96-1302-00) is a critical distance to ensure that the actuator is at the right height to engage the microswitches and keep the right tension on the centering spring.
To match that distance, the replacement handle and shaft cover has to stop the pivot cone where the shoulder on the original shaft (P/N 95-1274-00) did.
(06-Original and replacement shafts.jpg)
The top of the pivot cone is 2.5mm below the top of the joystick body.
(07-LS-30 Handle Measurements.jpg)
Fabricating the shaft
Make a horizontal mark at 4.2mm for the first hole.
One way to do that is to paint part of the shaft with a Sharpie, set your calipers to 4.2 mm, barely rest one jaw on the end, and roll the shaft so the tip of the other jaw leaves a scratch.
(08-Sharpie and Scratch 1.JPG) (09-Sharpie and Scratch 2.JPG)
Drill a 4mm hole, 4mm deep, 4.2mm from the end of the shaft.
Measure and mark the distance from the center of the first hole to the center of the shaft collar setscrew.
That distance = 55mm + the estimated shaft cover height from this list:
-- 19.7mm shaft cover for a metal panel
(15.6mm above + 1.6mm panel + 2.5mm under)
-- 37.2mm shaft cover for 3/4" MDF
(15.6mm above + 19.1mm panel + 2.5mm under)
-- 34mm for a 5/8" wood panel
-- 30.8mm for a 1/2" wood panel
If you plan on using threaded inserts like the ones from GGG to mount your joystick, you may want to add an extra mm for the flange.
For a 3/4" MDF panel with GGG-style threaded inserts, there should be 93.2mm (55mm + 37.2mm + 1mm) between the centers of the holes.
Drill a 5mm hole or grind a 5mm flat ~2mm deep for the shaft collar setscrew
Must be deep enough for the setscrew to be flush with the handle and shallow enough for the setscrew to transfer torque to the shaft
Go an extra mm deeper if you want to cover the setscrew hole with LS30_Setscrew_Cover.scad.
The distance between the bottom edge of the 4mm hole (step 1) and the top of the setscrew flat/hole (step 3) minus 59.5mm (60.5mm if you're using GGG-style inserts) = the actual printed shaft cover height
This ensures the correct amount of joystick spring tension
Cut the top of the shaft 24-25mm from center of the shaft collar set screw hole/flat
(10-Drilled shaft.jpg)
When the handle is assembled, there should be 38mm from the base of the pivot cone to the center of the 4mm screw hole
(11-Fabricating the Shaft.jpg)
Test print for hardware fit
LS30_Test_Print.scad allows you to check if your Shaft Collar, Set Screw, and Shaft will work with the following variables:
-- ShaftDiameter
-- ShaftCollarHeight
-- ShaftCollarOuterDiameter
-- SetScrewDiameter
Open the file in OpenSCAD.
Make any desired changes to the variables on lines 17 thru 22.
There must be a ";" after the variable.
-- Think of it like the game "Simon Says". No ";" = not saying "Simon says" = don't do it.
"//" indicates a comment or disabled code.
Preview
(toolbar icon or F5)
If there is a syntax error like a missing ";", preview will crash and flag the next line of code
Render
(toolbar icon or F6)
Prepares the object for export.
Export as STL
(toolbar icon or File -- Export -- Export as STL . . .)
Print the .STL file
Print parts:
Handle
Shaft cover
Setscrew cover (optional)
Ikari Warriors dust washer https://www.thingiverse.com/thing:3094055 (optional + you might want to paint it)
Like before, open the .scad file, change variables as desired, preview, render, export as .STL, and print the .STL file.
(12-Printed parts.jpg)
Assemble the handle:
Insert and tighten the setscrew so it is completely inside the shaft collar.
(13-Setscrew inside.jpg)
Align setscrew/hole and insert the shaft collar into the handle.
(14-Shaft collar aligned.jpg)
Loosen the setscrew through the setscrew hole in the handle.
-- If the hole is tight enough to engage the threads on the setscrew, you want it to cut threads from the inside out.
Insert the shaft into the shaft collar and handle.
Tighten the setscrew.
Hold the setscrew cover by the stem to test-fit the cover thickness. You may need to sand it or print a thicker cover. (optional)
(15-Setscrew cover test-fit.jpg)
Insert the setscrew cover. (optional)
Apply print smoothing epoxy to the handle, shaft cover, and dust washer. Allow to cure fully. (optional)
Install shaft cover.
Install dust washer.
Install pivot cone with the narrow side toward the handle.
(16-Handle assembly.jpg)
Insert the handle into the body of the joystick
Brace the handle against the tabletop and press down on the body to expose the setscrew hole.
Put the arm loop over the post and place the actuator/coupler on the shaft.
Align the hole/setscrew and tighten.
Rotary encoder options:
KADE miniArcade 2.0 firmware (rotary + keyboard buttons, two sticks)http://forum.arcadecontrols.com/index.php/topic,154126.0.html
-- Runs on your choice of 32u4 AVRs
--- MattairTech MT-DB-U4
--- Arduino Leonardo Micro
--- Arduino Leonardo Pro Micro has some pins/ports not connected so it can only handle one joystick
GGG GP-Wiz40 (rotary + gamepad buttons, two sticks)
Ultimarc Rotary encoder board (rotary only, you'll need a separate encoder for the buttons and joystick microswitches, fixed keystroke outputs, two sticks)
Ultimarc U-HID (rotary + keyboard or gamepad buttons)
-- Need to wire 4 diodes to convert the 12-position rotary switch into a quadrature (mouse) waveform.
KADE miniArcade firmware (original)
-- Minimus AVRs are hard to find
Mechanical Rotary Joystick Games:
Battle Field (Japanese version of Time Soldiers)
Bermuda Triangle
Dogou Souken a.k.a. Dogosoken (Japanese version of Victory Road)
Downtown
Gondomania
Guerilla War
Guevara (Japanese version of Guerrilla War)
Heavy Barrel
Ikari III - The Rescue (This is the only rotary game that uses three player buttons.)
Ikari Warriors
Jackal (Japanese version of Top Gunner)
Makyou Senshi (Japanese version of Gondomania)
Midnight Resistance
SAR - Search And Rescue
T.N.K. III
Time Soldiers
Top Gunner (bootleg)
Victory Road
World Wars
MAME Settings for Mechanical Rotary Joysticks
For mechanical rotary games:
Input (this Game) menu
Positional Analog to none
Analog Control menu
Positional Digital Speed = 0
Positional Sensitivity = 100
Scott
Similar models
3dwarehouse
free
Happ Competition / Ultimate Joystick
...oystick designs. shaft length for when mounted in a 3/4' panel. #arcade #competition #control_panel #happ #joystick #ultimate
grabcad
free
Happ joystick
...happ joystick
grabcad
happ joystick for arcade control panel layout
thingiverse
free
Furniture handle by tilkpl
... is sized for 4mm threaded inserts.
i printed in pla, then smoothed in the reittec polisher, then clear-coated for glossy finish.
grabcad
free
Happ Ms. Pacman joystick
...happ ms. pacman joystick
grabcad
happ ms. pacman joystick for arcade control panel layout
thingiverse
free
Joystick center guide (Happ style)
...joystick center guide (happ style)
thingiverse
simple guide to help center happ style joysticks into your control panel.
3dwarehouse
free
Happ Rotary Optical Joystick
...ch as 50 caliber. #arcade #arcade_controller #happ #joystick #optical_encoder #optical_rotary_joystick #rotary_joystick #suzohapp
thingiverse
free
Thread tap handle M3, M4, M5, M3,2 and M6,2 by JeEk
... 4mm taps - than the ones i have remixed.
these are designed with square holes with the measures 3mm, 3,2mm, 4mm, 5mm and 6,2mm.
thingiverse
free
8mm shaft collar by jbeale
...ews. currently adjusted to be quite close to nominal 8 mm so may need some cleanup / reaming to fit, and especially the m3 holes.
grabcad
free
Hillman 838622 Shaft Collar
...hillman 838622 shaft collar
grabcad
hillman .75 x 1.25 x .5625 shaft collar with setscrew 838622
3dwarehouse
free
Happ Competition Pushbutton
...parts of a happ competition pushbutton for mocking up control panels or joysticks. #arcade #button #competition #happ #pushbutton
Pl1
3ddd
free
Люстра Emme Pi Light / Masiero 6030/PL1
...ипу: потолочный светильник
страна-изготовитель: италия
высота: 46 см
диаметр: 46 см
материал: абажур цвета слоновой кости- стекло
3dfindit
free
PL1
...pl1
3dfind.it
catalog: zobal
thingiverse
free
Pipe Label Clips - Hot and Cold by PL1
...-on hot and cold pipe label clips for 1/2" copper pipe.
scad file included so you can easily customize using openscad.
scott
3d_sky
free
Chandelier Emme Pi Light / Masiero 6030 / PL1
... art. 6030 / pl style: ceiling lamp country of origin: italy height: 46 cm diameter: 46 cm material: lampshade ivory glass kosti-
thingiverse
free
Octagonal Fillet Gauges by PL1
... function code comes from the "polygon areas.scad" example in openscad.
it was written in 2015 by marius kintel.
scott
thingiverse
free
Ikari Warriors Dust Washer by PL1
...w .stl file into your slicer program
check the top layer path after slicing to be sure the fine lines aren't missing.
scott
thingiverse
free
IR Beam Break Sensor Mounts by PL1
...hreads break mdf down to pulp so easily.
scad files included so you can easily modify the mounts to work with your project.
scott
thingiverse
free
Hot shoe cover by jorgensen2004
...this hot shoe camera cover for my olympus pen e-pl1 camera. i lost the original one. this one fits...
thingiverse
free
Rotary Encoder Mount for MAME Control Panel by PL1
...ender
(toolbar icon or f6)
prepares the object for export.
export as stl
(toolbar icon or file -- export -- export as stl . . .)
thingiverse
free
Williams Drop Target Guide (03-7479 or 3B-7479) by PL1
... - 3 targets
screw sizes:
#6-32 x 3/4" machine screw (outer columns)
#4 x 1/4" sheet metal screw (inner columns)
scott
Happ
turbosquid
$29
Trussardi Casa Happ Sofa
...di casa happ sofa for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1580842)
turbosquid
$25
Trussardi Casa Happ Sofa
...sa happ sofa for download as max, max, max, fbx, obj, and 3ds on turbosquid: 3d models for games, architecture, videos. (1581365)
3dfindit
free
HAPP
...happ
3dfind.it
catalog: yuki giken
thingiverse
free
Happ P360 Gates
...happ p360 gates
thingiverse
hexagonal and square gate for the happ p360 arcade stick
3dfindit
free
HAPP-NF25
...happ-nf25
3dfind.it
catalog: yuki giken
thingiverse
free
Happ Actuator by wickedsun
...
thingiverse
this is a happ controller actuator. one of the controllers i bought didn't have one, so i had to create my own.
thingiverse
free
Joystick center guide (Happ style)
...joystick center guide (happ style)
thingiverse
simple guide to help center happ style joysticks into your control panel.
thingiverse
free
Happ Lap Stick by brandonjmoore
...it.
this is compatible with happ-depth buttons and joystick. i think happ is the only way to go... seems i'm in the minority.
thingiverse
free
Happ lock by wickedsun
...work with a happ button and i'll fix it.
make sure you print external perimeters first, else the screw won't print right.
thingiverse
free
Sanwa Joystick To Happ Mount Adapter by lkoloszyc
... make a sanwa joystick fit in il/happ mounting holes.
probably won't work very well and should be made of something sturdier.
Ls
3d_export
$20
lexus ls 2018
...lexus ls 2018
3dexport
lexus ls 2018
3ddd
free
CP_155-LS
...-ls
3ddd
окно
панорамная раздвижная система reynaers.
модель cp155-ls
сайт производителя -http://www.reynaers.com/home
design_connected
$18
Lotus LS-1CB
...lotus ls-1cb
designconnected
cappellini lotus ls-1cb computer generated 3d model. designed by morrison, jasper.
3ddd
$1
Концертное кресло LS 619
...концертное кресло ls 619
3ddd
кинотеатр
концертное кресло ls 619
turbosquid
$200
Lexus LS 460
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$110
Lexus LS 4603d model
...ls 4603d model
cgstudio
.3ds .max .obj - lexus ls 460 3d model, royalty free license available, instant download after purchase.
3d_export
$109
Zlin Z50 LS 3D Model
...ler zlin aviation z50 ls light sport acrobat czech aircraft aerobatic single seat
zlin z50 ls 3d model fisherman3d 63702 3dexport
3d_export
$110
Lexus LS 460 3D Model
...ota 2007 car vehicle transportation automobile auto civilian detailed interior door
lexus ls 460 3d model behr bros 3536 3dexport
3d_ocean
$89
Lexus LS (XF40) 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
turbosquid
$5
7.92x57mm-German-Patrone-lS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Joystick
3d_export
$8
Joystick
...joystick
3dexport
joystick copy to ps4
turbosquid
$30
Joystick
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Joystick
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Joystick
... model joystick for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1166950)
turbosquid
free
joystick
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$25
Joystick 3D Model
...joystick 3d model
3dexport
joystick game controller
joystick 3d model ailamvnn 69692 3dexport
archive3d
free
Joystick 3D Model
...tick 3d model
archive3d
joystick game device
joystick - 3d model for interior 3d visualization.
3d_export
$5
Joystick
...joystick
3dexport
atari joystick controller<br>pbr textures<br>fbx file<br>3ds max 2021 file<br>low poly
3d_export
$5
xbox 360 joystick
...xbox 360 joystick
3dexport
xbox 360 joystick
3d_export
free
joystick vintage
...joystick vintage
3dexport
Rotary
3ddd
$1
Medical Rotary table
...medical rotary table
3ddd
медицинский стол
medical rotary table
turbosquid
$18
Codex Rotary
...squid
royalty free 3d model codex rotary for download as stl on turbosquid: 3d models for games, architecture, videos. (1439894)
turbosquid
$12
Rotary drill
...y free 3d model rotary drill for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1394316)
3d_export
$6
The rotary module 3D Model
...the rotary module 3d model
3dexport
the rotary module
the rotary module 3d model armata2015 98145 3dexport
turbosquid
$40
Rotary Engine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Rotary Phone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
ROTARY medal
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Rotary conveyor
...veyor for download as 3ds, max, ige, obj, fbx, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1300472)
3d_export
$5
Rotary Cylinder 3D Model
...rotary cylinder 3d model
3dexport
rotary cylinder pneumatic pressure torque
rotary cylinder 3d model fau 71217 3dexport
3ddd
$1
Medical Rotary Table M2
...medical rotary table m2
3ddd
медицинский , стол
medical rotary table m2
30
3d_export
free
30 x 30 extrusion
... x 30 x 40.sldprt<br>30 x 30 x 50.sldprt<br>30 x 30 x 606.sldprt<br>the sketch.sldprt<br>30 x 30 x 40.stl
3d_export
$15
rocks 30
...rocks 30
3dexport
rocks 3d model 30
3ddd
$1
Bed 30
...bed 30
3ddd
постельное белье
bed 30.i hope you like it
design_connected
$7
Edge 30
...edge 30
designconnected
artemide edge 30 computer generated 3d model. designed by mendini, alessandro.
design_connected
$18
30-0073
...30-0073
designconnected
christopher guy 30-0073 armchairs computer generated 3d model. designed by n/a.
design_connected
$13
2097-30
...2097-30
designconnected
flos 2097-30 pendant lights computer generated 3d model. designed by gino sarfatti.
3d_export
$17
Yakovlev Yak-30
...yakovlev yak-30
3dexport
yakovlev yak-30
turbosquid
$50
Decor 30
...urbosquid
royalty free 3d model decor 30 for download as stl on turbosquid: 3d models for games, architecture, videos. (1678263)
turbosquid
$20
Curtains 30
...osquid
royalty free 3d model curtains 30 for download as max on turbosquid: 3d models for games, architecture, videos. (1333840)
turbosquid
$6
Bedcloth 30
...osquid
royalty free 3d model bedcloth 30 for download as max on turbosquid: 3d models for games, architecture, videos. (1522756)
Handle
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle
handle 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle furniture handle knob
handle 2 n140814 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
handle door knob door-handle
handle n110413 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
door-handle handle door-knob
handle n070209 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Handle
...handle
archibase planet
door-handle handle door-knob
handle n270309 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Replacement
3d_export
$12
replaceable bristle
...replaceable bristle
3dexport
this is 3d printable replaceable bristle toothbrush.
3d_export
$34
Knee Replacement
...h meets the lower leg. ... during a total knee replacement, the end of the femur bone is removed and replaced with a metal shell.
3d_export
$44
Hip Replacement
...omponents. the damaged femoral head is removed and replaced with a metal stem that is placed into the hollow center of the femur.
turbosquid
$59
Hip replacement
...el hip replacement for download as ma, c4d, lwo, lxo, and obj on turbosquid: 3d models for games, architecture, videos. (1520195)
turbosquid
$10
Module replacment station
...alty free 3d model module replacment station for download as on turbosquid: 3d models for games, architecture, videos. (1271271)
3d_export
$8
tool replacement gearbox
...tool replacement gearbox
3dexport
eccentric lifting mechanism, you can process according to available drawings.
turbosquid
$7
Globe Oil Atomizer Replacement Housing
... oil atomizer replacement housing for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1253839)
turbosquid
free
SLICE Ceramic Scapel (Replaceable Blade)
... (replaceable blade) for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1363525)
3d_export
$19
Knee Replacement Implant
...ntimeter<br>__________________________<br>poly count :<br>polygon count - 217440<br>vertex count - 108776
turbosquid
$19
(Project) Bad odor filtering sytem with support rail and pulley that assure a comfortable gel filter element replacement.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.