Thingiverse
LowRider2 CNC Y-plate dovetail remix also compatible with Fusion 360 by Shmoee
by Thingiverse
Last crawled date: 2 years, 10 months ago
Credit to Ryan at https://www.v1engineering.com/ for creating great DIY CNC options, and to braingame26 for the idea on how to split this piece into three printable sized parts using dovetails found here: https://www.thingiverse.com/thing:3518326
I leveraged braingame26's DesignSpark Mechanical project file to export as a dxf file to then import into Fusion 360 where I extruded the sketch to 12.7mm (1/2") thickness. I also extended the dovetail all the way through the joints.
I saw that braingame26 had split the design symmetrically with the dovetails. In my case, a side piece can either physically flip over, or one end can be mirrored in the slicer if desired, to fit on either side of the middle section. I only included one stl file for a side since it can be printed twice. When I printed, I did mirror one of the side pieces for each Y plate in the slicer so that the surface finishes matched across the three pieces of the Y plate. Mirroring the side is possible in this particular case because I extended the dovetails all the way through the parts.
It looks like braingame26 had also designed in approximately a 0.25mm tolerance on the joint which I did not modify. This goes together tightly with minimal sanding which is great. I have printed these and put one joint together with no sanding at all and the other with light sanding using an emory board and triangle file for sharpening the inner corners. The joints are very tight. I got the joints started by hand then used my own body weight to step on the pieces rocking back and forth to press them together completely. For the white piece, I had to resort to putting a piece of cardboard over the joint and then using a hammer to lightly tap the dovetail joints together completely once I had them started. The joints are very solid and I didn't apply glue yet! They are not coming apart at this point so I think I'll let some superglue run down the joints and call it good. It seems reasonable that the dovetail joints can also later be additionally strengthened if necessary by gluing additional plates on the surface over the dovetail joints, assuming such plated won't interfere with the other parts bolted onto the plate.
I believe braingame26 had indicated his was based on the 25.4mm dxf file from V1 Engineering. I compared this against another version of this plate apparently based on 25mm dxf file; this one in particular: https://www.thingiverse.com/thing:4789218 and see no significant difference which gives me confidence these Y plates are as they should be. I have not checked against any other versions.
I believe someone could use this to make a printed part or alternatively scale this down in the Z axis to make a template for those of us not yet CNC enabled. The best solution may be to simply acquire all the flat parts you need at the link below:https://shop.v1engineering.com/collections/lowrider-parts/products/lowrider-cnc-flat-parts
I printed with a 0.4mm nozzle at 0.28 layer height and 40% infill at 80mm/s with 8 walls and 8 top and 8 bottom layers using eSun PLA+ (Pink and Warm white...) These plastic ones look like they are going to work to me but once I have the ability to CNC better ones, I will route them out of plywood and replace them at a later time).
Each middle section took 13 hours to print and uses approximately 200g of filament each. Each of the side pieces took 4 hours and used about 57g worth of filament each. For a set of Y plates you would need two middle pieces and four side pieces. It took me about 42 hours of total print time (which I split across two printers). Total filament usage estimation from Cura slicer is approximately 628g for the two Y plates out of eSun PLA+. I weighed my pieces and found that the assembled pink y-plate really weighs 302g and the assembled white y-plate weighs 316g for a total of 618g in reality. The printer that I printed the pink one on is slightly better tuned than the printer used to print the white one.
I will share some pics shortly.
Good Luck!
I leveraged braingame26's DesignSpark Mechanical project file to export as a dxf file to then import into Fusion 360 where I extruded the sketch to 12.7mm (1/2") thickness. I also extended the dovetail all the way through the joints.
I saw that braingame26 had split the design symmetrically with the dovetails. In my case, a side piece can either physically flip over, or one end can be mirrored in the slicer if desired, to fit on either side of the middle section. I only included one stl file for a side since it can be printed twice. When I printed, I did mirror one of the side pieces for each Y plate in the slicer so that the surface finishes matched across the three pieces of the Y plate. Mirroring the side is possible in this particular case because I extended the dovetails all the way through the parts.
It looks like braingame26 had also designed in approximately a 0.25mm tolerance on the joint which I did not modify. This goes together tightly with minimal sanding which is great. I have printed these and put one joint together with no sanding at all and the other with light sanding using an emory board and triangle file for sharpening the inner corners. The joints are very tight. I got the joints started by hand then used my own body weight to step on the pieces rocking back and forth to press them together completely. For the white piece, I had to resort to putting a piece of cardboard over the joint and then using a hammer to lightly tap the dovetail joints together completely once I had them started. The joints are very solid and I didn't apply glue yet! They are not coming apart at this point so I think I'll let some superglue run down the joints and call it good. It seems reasonable that the dovetail joints can also later be additionally strengthened if necessary by gluing additional plates on the surface over the dovetail joints, assuming such plated won't interfere with the other parts bolted onto the plate.
I believe braingame26 had indicated his was based on the 25.4mm dxf file from V1 Engineering. I compared this against another version of this plate apparently based on 25mm dxf file; this one in particular: https://www.thingiverse.com/thing:4789218 and see no significant difference which gives me confidence these Y plates are as they should be. I have not checked against any other versions.
I believe someone could use this to make a printed part or alternatively scale this down in the Z axis to make a template for those of us not yet CNC enabled. The best solution may be to simply acquire all the flat parts you need at the link below:https://shop.v1engineering.com/collections/lowrider-parts/products/lowrider-cnc-flat-parts
I printed with a 0.4mm nozzle at 0.28 layer height and 40% infill at 80mm/s with 8 walls and 8 top and 8 bottom layers using eSun PLA+ (Pink and Warm white...) These plastic ones look like they are going to work to me but once I have the ability to CNC better ones, I will route them out of plywood and replace them at a later time).
Each middle section took 13 hours to print and uses approximately 200g of filament each. Each of the side pieces took 4 hours and used about 57g worth of filament each. For a set of Y plates you would need two middle pieces and four side pieces. It took me about 42 hours of total print time (which I split across two printers). Total filament usage estimation from Cura slicer is approximately 628g for the two Y plates out of eSun PLA+. I weighed my pieces and found that the assembled pink y-plate really weighs 302g and the assembled white y-plate weighs 316g for a total of 618g in reality. The printer that I printed the pink one on is slightly better tuned than the printer used to print the white one.
I will share some pics shortly.
Good Luck!
Similar models
thingiverse
free
Laundry dryer reinforcement for broken joint
...h the short.
there is a 2nd short one: this one had a double on the back of the piece to help the dryer to stay close when it is.
thingiverse
free
Overwatch logo LED wall light by JoonasHe
...pports generated only for the joints.
in the end the whole thing weighed so little, that i could hang it on one simple thumbtack.
thingiverse
free
Pipe (middle piece, 3 of 3) by jesse
...m has a male joint, the middle has a female joint on one side and a male joint on the other side, and the top has a female joint.
thingiverse
free
Quadruped Leg Remix by henryarnold
....
each leg requires two pieces which must be printed with supports and then glued together. see photo showing suggested supports
thingiverse
free
Kingdom Keyblade split for printing by Stanos
...together.
update: the stl had an errant piece sticking out of the bottom causing it to sit above the build plate. fixed it :)
3dwarehouse
free
Laminated Floor - CNC Dovetail Router Template
...etail machine (24') to route those dovetail joints when 7 single laminated board jointed to become a side board of a cabinet.
thingiverse
free
Fruit Bowl by KarmicReboot
...nto each other with pin connectors. if someone else wants to remix this design to do that before i get around to it, be my guest!
cg_trader
$10
Kitchen gap cover | 3D
...od clean 3d print printing gap cover houseware printable oven stove threshold counter granite make cleaning dining kitchen dining
thingiverse
free
Dovetail Joint Test by Skylance
...nt them flat. i had to rotate them so they were standing up vertically. if you need to do that you will need supports and a raft.
thingiverse
free
Border Pieces Scaled x2 and Split by BillZarek
...d the original border pieces to double their size. split into 3 pieces. at post i sanded the sides down and super glued together.
Shmoee
thingiverse
free
Another Sweetheart by Shmoee
...another sweetheart by shmoee
thingiverse
enjoy!
thingiverse
free
Miniature Present by Shmoee
...
want more presents?
i made this minature present using fusion 360 from scratch. i've included .stl and .step files. enjoy!
thingiverse
free
Ada's friend by Shmoee
...giverse
ada's friend
may need to lower the model one layer into the bed to make the first layer flat. i can fix that later.
thingiverse
free
I am not your father by Shmoee
...verse
i took the liberty of finishing it.
thanks to the developer of https://www.thingiverse.com/thing:1433644 for the top half.
thingiverse
free
ada remix by Shmoee
...condly i connected the head to body and blended in the seam resulting in a new stl. grab it while you can if you are interested.
thingiverse
free
Follow the sign by Shmoee
...with mapping this shape onto a sphere for stereographic projection.
https://en.wikipedia.org/wiki/stereographic_projection
enjoy!
thingiverse
free
Dolphin Bookmark by Shmoee
...ttps://svgsilh.com/image/152992.html
and shifting it to where i wanted by changing line 11 to:
translate(v=[-29, 29, h/2])
enjoy!
thingiverse
free
lightweight 6 bladed rotor for Flying Toy Helicopter (old) by Shmoee
....stl from:https://www.thingiverse.com/thing:4840934
scaled to 62% and added a gear for use with the old flying helicopter design.
thingiverse
free
Switch Pro Controller Holder with logo removed by Shmoee
...ginal with logo.
i decided to fill in the logo so it won't show up in the print. nothing else has changed from the original.
thingiverse
free
thumb rest for pocket clarinet chalumeau by Shmoee
... and then super glued the thumb rest on. super glue bonds within about a second so be sure you have it located correctly!
enjoy!
Lowrider2
thingiverse
free
LowRider2 Z-Endstop by 4noxx
...lowrider2 z-endstop by 4noxx
thingiverse
lowrider2 z-endstop for 25mm and 25.4 pipes
thingiverse
free
LowRider2 / MPCNC Autosquare Case by 4noxx
...lowrider2 / mpcnc autosquare case by 4noxx
thingiverse
lowrider2 / mpcnc autosquare
potentiometer 5mm
push button 16mm
thingiverse
free
LowRider2 belt tensioner by 4noxx
....thingiverse.com/thing:3026040https://www.thingiverse.com/thing:3064287
spanner_fest_v2.stl
hole for m4 is 20mm deep instead 4mm
thingiverse
free
LowRider2 Dust Shoe by 4noxx
...shoe
bom:
front and back part
18x m3x10 or larger
tablecloth pvc transparent 1-2mm
02.01.2021
add a second version for m3 inserts
thingiverse
free
Rails for LowRider2 CNC by swepeter
...this:https://www.thingiverse.com/thing:2368805
thanks godler
alos modded the y plate fromhttp://www.thingiverse.com/thing:3064287
thingiverse
free
65 mm Spindle Mount for LowRider2 by quirxi
... a 65 mm watercooled (china) spindle to the original 611-plate of the lowrider2 (see: https://www.thingiverse.com/thing:3064287).
thingiverse
free
Lowrider2 separación extra wheels by pericomart
...- aporta más estabilidad al mantener la rueda a 90º gradospermite mantener la ruedas a 90º con respecto al eje y.
se necesitan 4.
thingiverse
free
lowrider2-611-plate-2_25.4mm by peterfosseus
...e, then a new aluminum one :)
https://docs.v1engineering.com/lowrider/
openscad file for your convenience. - http://openscad.org/
thingiverse
free
Lowrider2 eje Y Tirantes by pericomart
...or estabilidad al eje y
incluyo versión para 25mm y para 25,4mm
se debe imprimir con soporte, el de tipo árbol da buen resultado.
thingiverse
free
LowRider2 Vac Adapoter for 1.875 Hose by C6SUMMER
...lowrider2 vac adapoter for 1.875 hose by c6summer
thingiverse
hose adapter to fit the lowrider vacuum base fitting.
Dovetail
3ddd
$1
Dovetail Furniture
...dovetail furniture
3ddd
комод
dovetail furniture
3ddd
$1
Selva Console Louis XV
...cherry. veneered surfaces in cherry over blockboard. drawer with dovetail internal section of the drawer in solid ash, drawer...
3ddd
free
Travelers Desk Hutch
...a hardwood frame. finished in heirloom pine. features english dovetaild ...
3ddd
$1
RH MACHINTO
...precisely mitered frames 1 adjustable shelf per section 3 english-dovetaild drawers wipe with a soft, damp cloth; avoid the...
3ddd
$1
Модульная система Swallow
...project based on ancient techniques but with modern applications. dovetail joint, typical of most sought cabinetmakers, is powerfully elaborated...
3ddd
$1
Hooker Furniture Living Room Bombay Accent Chest
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
3ddd
$1
Hooker Furniture Living Room Three-Drawer Shaped Chest
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
3ddd
$1
Набор из 2-х столов Swallow
...project based on ancient techniques but with modern applications. dovetail joint, typical of most sought cabinetmakers, is powerfully elaborated...
3ddd
$1
Fretwork Chest-Pearl Essence
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
thingiverse
free
dovetails
...dovetails
thingiverse
fingerzinken
Fusion
3ddd
free
BoConcept Fusion
...boconcept fusion
3ddd
boconcept , fusion
boconcept fusion
3ddd
$1
Ford Fusion
...ford fusion
3ddd
ford
ford fusion
3ddd
$1
HANSA Fusion
...hansa fusion
3ddd
духовой шкаф , hansa
встраиваемый духовой шкаф hansa fusion
design_connected
$11
1520 Fusion
...1520 fusion
designconnected
dränert 1520 fusion computer generated 3d model. designed by aisslinger, werner.
3ddd
free
Диван BoConcept Fusion
...03]
артикул: 4990059fu032103
ссылка на продукт:
http://www.boconcept.com/ru-ru/furniture/living/sofas/fusion/10347/диван-fusion
3ddd
$1
Matthew Robinson / Fusion
... журнальный
solid wood tables matthew robinson / fusion
http://www.matthewrobinsonfurniture.co.uk/#!fusion
3ddd
$1
Best. Fusion
...а пристенная best fusion.
5930 полигонов.
wall mounted range hood best fusion.
5930 polygons.
file: max 2010, 2012; fbx; obj.
3ddd
free
Туалетный столик Fusion
...столик fusion
3ddd
трюмо , fusion
туалетный столик fusion
арт.108dwk
размеры: 120х47х76
design_connected
$13
Fusion Chair
...gnconnected
photo-realistic 3d models of the fusion chair from boconcept for 3d architectural and interior design presentations.
3ddd
$1
Кресло fusion
...ах ткани и кожи. на фотографии, фетр светло-серого цвета 2121/шпон дуба. в74xш97xг78см. [стулья - l042]
артикул: 4060058l0422121
Compatible
turbosquid
$3
Genesis 8 Clothing 1 dForce Compatible
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Genesis 8 Clothing Top 1 dForce Compatible
...nesis 8 clothing top 1 dforce compatible (2) for download as on turbosquid: 3d models for games, architecture, videos. (1217671)
turbosquid
$50
Screwdriver Latch Type CSC Torx compatible with Straumann
...sc torx compatible with straumann for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1370064)
3d_export
$9
cad compatible casual woman hand model f1p3d1v1hand
...s: stl, obj, fbx<br>models with quad-topology (1100 quads) are also included (f1p3d1v1hand_quad.obj, f1p3d1v1hand_quad.fbx)
3d_export
$38
uzaki rigify
...uzaki rigify 3dexport compatible-blender ...
3d_export
$5
cloud lowpoly 3d
...cloud lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$5
flower lowpoly 3d
...flower lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$5
rocks lowpoly 3d
...rocks lowpoly 3d 3dexport lowpoly 3d format fbx compatible with unreal and...
3d_export
$10
pots
...pots
3dexport
pots<br>modeled in blender<br>compatable with evee and cycels
3d_ocean
$95
Mr Techny
...for 3ds max 2010 and later – biped (2010 compatible and cat (2011 compatible) versions incluided. for maya 2012...
Cnc
3d_export
$35
Cnc
...cnc
3dexport
the cnc machine is unfinished
3d_export
$10
cnc router
...cnc router
3dexport
prototipe cnc router
3d_export
$10
cnc machine
...cnc machine
3dexport
cnc machine model with individual model files with assembly
3d_export
$5
Cnc 3D Model
...cnc 3d model
3dexport
cnc
cnc 3d model csiszar 61289 3dexport
turbosquid
$10
cnc bedroom
...osquid
royalty free 3d model cnc bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1494981)
turbosquid
$9
cnc(wood)
...rbosquid
royalty free 3d model cnc(wood) for download as max on turbosquid: 3d models for games, architecture, videos. (1189189)
turbosquid
$1
CNC Frame
...rbosquid
royalty free 3d model cnc frame for download as stl on turbosquid: 3d models for games, architecture, videos. (1371706)
turbosquid
free
cnc table
...rbosquid
royalty free 3d model cnc table for download as max on turbosquid: 3d models for games, architecture, videos. (1500926)
turbosquid
$30
CNC Lathe
...
royalty free 3d model cnc lathe for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1284634)
turbosquid
$25
CNC Machine
...
royalty free 3d model cnc machine for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1307199)
360
3ddd
$1
360-panoramas_001
...360-panoramas_001
3ddd
панорамная фотография 360 град.
3ddd
$1
360-panoramas_002
...360-panoramas_002
3ddd
панорамная фотография 360 град.
разрешение - 9000х2250 px.
3ddd
$1
360-panoramas_022
...360-panoramas_022
3ddd
панорамная фотография 360 град.
разрешение - 9000х1600 px.
3ddd
$1
360-panoramas_008
...360-panoramas_008
3ddd
панорамная фотография 360 град.
разрешение - 8000х1500 px.
3ddd
$1
360-panoramas_021
...360-panoramas_021
3ddd
панорамная фотография 360 град.
разрешение - 9000х1600 px.
3ddd
$1
360-panoramas_020
...360-panoramas_020
3ddd
панорамная фотография 360 град.
разрешение - 9000х2250 px.
3ddd
$1
360-panoramas_003
...360-panoramas_003
3ddd
панорамная фотография 360 град.
разрешение - 9000х1500 px.
3ddd
$1
360-panoramas_010
...360-panoramas_010
3ddd
панорамная фотография 360 град.
разрешение - 9000х1564 px.
3ddd
$1
/ XBOX 360
... видеоприставка , джойстик
xbox 360,3dmax2011+vray
3ddd
$1
360-panoramas_018
...360-panoramas_018
3ddd
панорамная фотография 360 град.
разрешение - 9000х2250 px.
Remix
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...grey/grey, dusty green/dusty green, nature/oak, natural white/oak upholstery options remix 183/black, remix 133/grey, remix 643/dusty red leather options black...
3ddd
$1
Barovier&Toso 7190-7195
...7190-7195 3ddd barovier&toso потолочнай люстра фабрики barovier&toso;, коллекция manhattan remix артикул 7190-7195. размеры в inches: 39"...
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixd! no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix amber gold .max .obj .mb .lwo .fbx .c4d .3ds...
Plate
archibase_planet
free
Plates
...plates
archibase planet
plates and dishes plate
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
plate
...plate
3dexport
plate
archibase_planet
free
Plates
...plates
archibase planet
plates and dishes plate kitchen ware
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Plates
...plates
archibase planet
plate plates and dishes crockery
plates 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Plate
...plate
archibase planet
dinner-plate plate kitchen ware
plate n070808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$6
plate
...plate
3dexport
design of plate
3d_export
$5
plate
...plate
3dexport
plate lowpoly
archibase_planet
free
Plates
...plates
archibase planet
plate dish kitchen-ware
plate - 3d model for interior 3d visualization.
3ddd
$1
Plates
...plates
3ddd
полка , тарелка
african plates
archibase_planet
free
Plate
...plate
archibase planet
plate kitchen ware
plate - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Y
turbosquid
$1
Tetera y Galletas y Caf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Смеситель Y-CON
...смеситель y-con
3ddd
смеситель , y-con
смеситель y-con
3ddd
$1
Y-Chair
...y-chair
3ddd
tom dixon
y-chair designed by tom dixon,
3ds max + obj, corona
3ddd
$1
Y Chair compilation
....net/products/us/y-chair-sled-base
y chair swivel basehttp://www.tomdixon.net/products/us/y-chair-swivel-base
turbosquid
$190
Y-8
...y-8
turbosquid
royalty free 3d model y-8 for download as max on turbosquid: 3d models for games, architecture, videos. (1658891)
turbosquid
$7
Bench Y
...turbosquid
royalty free 3d model bench y for download as obj on turbosquid: 3d models for games, architecture, videos. (1488746)
turbosquid
$15
bonePile Y
...oyalty free 3d model bonepile y for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1546374)
turbosquid
$7
Y for Yarn
...d
royalty free 3d model y for yarn model for download as max on turbosquid: 3d models for games, architecture, videos. (1699732)
turbosquid
$2
FONT Y
...quid
royalty free 3d model font y for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1549457)
3ddd
$1
WOOD-y
...wood-y
3ddd
wooden guy
Also
turbosquid
$30
HTC Explorer black Also known as HTC Pico
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$23
Blood Cells Sickle Anemia also 3D Model
...micro virus bacterium bacteria medical science sick vein duct
blood cells sickle anemia also 3d model duchampmodels 7867 3dexport
3d_export
$5
house for the cat is also a pinned table
...n the preview:<br>- 3d max 2013 (v-ray)<br>- texture<br>- obj<br>- 3ds<br>a home for the cat, table
turbosquid
$30
Acer Allegro Smartphone Also known as Acer W4, Acer M310
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
HTC Desire U Smartphone also known as HTC T327w for the Chinese market
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
spinosaurus miniature print also with textures two versions 3d print model
...mm width :170 you can scale the model as you see fit if you have any questions and want similar work done. contact me via message
3d_export
$8
microphone
...metal leg and a glossy metal base. there is also an led backlight on the mode switch. a scene...
3d_export
$5
ornament trim vol 03
...3d software (3dmax, maya, blender, c4d, ...). there are also 5 previews for the product. 3dmax files saved 3dmax...
3d_export
$15
Beast tentacle
...beast tentacle 3dexport rigged beast tentacle. there is also animated version in fbx and max formats. there is...
3d_export
$13
camaro concept car
...a cgi model. it can be used in game also obj file, step file and render file are attached...