Lowrance Active target Ice fishing transducer mount by Morokolli

Last crawled date: 3 years, 1 month ago

Build your own rotating transducer mount!
With this attachment you can fit transducer under ice through 6" hole!
You need:
20x2mm aluminium pipe
25x2mm aluminium pipe
2x 40x5mm socket cap screw (Stainless)
2x 5mm nut

2x washers

Print top handle, bottom fork and 2x ducermount_lower_upper.
Cut 25mm pipe to length what you like and insert lower_upper parts to pipe ends.
Put handle to 22mm pipe and mark hole position and drill hole to pipe.
Attach handle to pipe using screw.
slide 25mm pipe over 20mm pipe and check proper position to cut it.
cut 20mm pipe and slide it inside 25mm pipe.
insert transducer fork into 20mm pipe so that fitting is tight.
drill hole to proper position and attach fork using screw.
Use mounting clamps to build attachment point for rotation handle.
ps. If you want to use original clamp with design, print ducermount_lower21 as lower part.
update! 25mm lower fork also available.