Low-profile Tented Kyria Base/Case by emitter_coupled

Last crawled date: 3 years ago

This is a very low-profile tented base for the Kyria split keyboard. It is tented at a 4 degree angle. I use choc switches, but they aren't required for this to work.
If you want to use this case, you need the following parts:
1 - left tent
1 - right tent
2 - switch plates
10 - M2 x 6mm machine screws
10 - M2 tapered heat-set inserts
16 - rubber dome bumpers
It is sized so that some form of bumper feet is required to keep the edge of the PCB from hitting the desk, so make sure to add them.
While only the switch plate is shared with Stephen Onnen's Kyria Case, I did use that project as a significant inspiration.