Low Poly Volga M24 by Its Nameless

Last crawled date: 1 year, 6 months ago

Despite its more imposing appearance, the GAZ-24 was in fact 75 mm (3.0 in) shorter in length and 120 mm in height, yet its wheelbase was extended by 10 mm. The lower body waist line, allowed the window area was to be increased, whilst using thinner linings in doors, roof and other body panels, notably increased interior space. The combination of this progressive design and a lower clearance gave it a much lighter and more elegant aura. The car was powered by a 2,445 cc (149.2 cu in)[44] ZMZ-24D engine, an evolution of the ZMZ-21A. Retaining the basic OHV configuration, it now ran on 92 RON gasoline (while the ZMZ-24-01 could use commonly available 76 octane, and the 24-07 could use liquid propane).[45] The cylinder block was die cast, instead of the slower coquille for the 21A. The engine featured a twin-choke carburettor, with a higher compression ratio, producing 95 hp (71 kW; 96 PS) at 4500 rpm and an even more impressive 186 N⋅m (137 ft⋅lbf) of torque at 2200–2400 RPM. Transmission was now fully synchronised four on floor layout. The brakes were improved, with a hydraulic vacuum servo unit (a licence-built Girling PowerStop), as well as an independent parking brake (rather than transmission brake of the GAZ-21). At the same time, certain features were retained for their proven reliability, like the kingpin front suspension[46] and recirculating ball steering. The car was built in several modifications and these were now indicated by numbers rather than letters. The sedan version was called GAZ-24. GAZ-24-01 was the taxi, which included a robust artificial leather interior and a slightly modified ZMZ-21A engine to run on 80 RON petrol. GAZ-24-02 was the estate wagon, introduced in 1972. Unlike the GAZ-22, it was serially assembled on a reserve conveyor, rather than out of sedan side panels. The rear, fifth, door was now a single unit that opened upwards instead of sideways. The car could seat eight people, due to a third row of seats in the cargo section. To allow maximum cargo volume and functionality, the seats in third and second rows were split (rather than a single bench) and could be folded independently of each other. GAZ-24-03 was the ambulance version of the -02. GAZ-24-04 was the taxi estate, with the powerplant and interior trim of the -01. In 1977 a GAZ-24-07 conversion kit was introduced for taxiparks. The GAZ-24-24 was the successor to the GAZ-23 Chaser, with an identical V8 and automatic gearbox from the Chaika. Yet, unlike the -23, given the purpose of the car, even less effort was put in to differentiate it from standard vehicle due to costs. For example, the automatic selector was masked under a standard shifting lever. A small batch of export cars for countries with left-hand traffic was called GAZ-24-54 (less than a thousand examples built[citation needed]). GAZ-24-76 and -77 were export versions to Benelux countries, who would retrofit the cars with Indénor diesels and a more luxurious trim such as vinyl roof. Five experimental vehicles were built on the chassis of GAZ-69 4×4, called GAZ-24-95, one of which was known to be personally used by Leonid Brezhnev. Though the vehicle never underwent a generational facelift on the scale of the GAZ-21 (if one does not count its derivative successors), nonetheless the car was modernised during production. The early stage included removal of bonnet-mounted rear-view mirrors, new ignition and boot locks. The novel belt-speedometer proved too complicated and was replaced by a standard arrow-driven one, as was the fate of the engine cooling coupling that controlled the ventilator fan (proved unreliable, the ventilator would be permanently on, whilst warm air for cold starts would be manually controlled with venetian-type shutter). Additions included external comfort lights were on the rear pillar's chrome element, that turned on upon opening of rear doors. In the original design brief the GAZ-24 was to be retired by 1978, and though by that time work on a successor (the GAZ-3102) was underway, it was clear that the car would have to soldier on the conveyor for a foreseeable future. In 1977, following a 1976 report by NAMI on the Volga's major shortcomings (problematic steering prime among them), GAZ refused to update the GAZ-24's front suspension, instead making only cosmetic changes.[47] (The front suspension would be unchanged until 2003, when the kingpins were changed to sealed ball joints,[48] while the rear got an antiroll bar.[49]) Visually, these Volgas can be identified by front and rear bumper overriders, front fog lights and rear reflectors integrated into a single block. Inside the car gained retractable seat belts, a new dashboard where all exposed metal elements were covered by plastic. In this final shape the car was produced until 1986, the estate until 1987. Including the GAZ-24-10, almost one and a half million such Volgas were produced. Полигоны указаны неверно! car midpoly vehicle mid poly standard car russian gameready unity blender civilian lowpoly game standard