Thingiverse
Logitech c270 CR-10 Camera mount by DigChaos
by Thingiverse
Last crawled date: 3 years ago
Update 6-21-2017
Updated the mount to allow room for swivel. The arm would hit the corner before, now it should clear it.
The C270 camera mount is attached to the camera using it's own hinge pin. The dual diameter bolt fits through the sliding mount. To remove the original weighted Logitech mount from the camera, use a thin knife to remove the covers over the ends of the hinge pin. You should then be able to use a screwdriver to remove the pin. You may need to push the pin out with a thin screwdriver or similar tool. The printed camera mount will be loose on the hinge. Use a small (M3?) metal washer at one end of the hinge pin, and a very small rubber washer at the other end of the hinge pin.
Here is a video of the disassembly process https://www.youtube.com/watch?v=bWz1-wV8AU4
I also made some small improvements on the arm itself. I increased the diameter of the top hole to accommodate the spring. Otherwise there wasn't enough room to lower the bed enough for proper leveling.
Since the bed of the CR-10 is so large you might want to get a larger field of view. I achieved this by using this adapter https://www.thingiverse.com/thing:1253022 and some cheap cell phone lenses off of amazon.
Updated the mount to allow room for swivel. The arm would hit the corner before, now it should clear it.
The C270 camera mount is attached to the camera using it's own hinge pin. The dual diameter bolt fits through the sliding mount. To remove the original weighted Logitech mount from the camera, use a thin knife to remove the covers over the ends of the hinge pin. You should then be able to use a screwdriver to remove the pin. You may need to push the pin out with a thin screwdriver or similar tool. The printed camera mount will be loose on the hinge. Use a small (M3?) metal washer at one end of the hinge pin, and a very small rubber washer at the other end of the hinge pin.
Here is a video of the disassembly process https://www.youtube.com/watch?v=bWz1-wV8AU4
I also made some small improvements on the arm itself. I increased the diameter of the top hole to accommodate the spring. Otherwise there wasn't enough room to lower the bed enough for proper leveling.
Since the bed of the CR-10 is so large you might want to get a larger field of view. I achieved this by using this adapter https://www.thingiverse.com/thing:1253022 and some cheap cell phone lenses off of amazon.
Similar models
thingiverse
free
Logitech C270 Webcam Mount for Original Prusa i3 MK2 by JohnOCFII
...push the pin out with a thin screwdriver or similar tool. the printed camera mount will be loose on...
thingiverse
free
c270 Prusa Mk3 Camera mount by DigChaos
...push the pin out with a thin screwdriver or similar tool. the printed camera mount will be loose on...
thingiverse
free
c270 Prusa Mk3 Camera mount solid bed mount by nykhedimus
...push the pin out with a thin screwdriver or similar tool. the printed camera mount will be loose on...
thingiverse
free
Cr-10 Fixed Bed C270 Camera Mount by techoutreach
...art that wont need supports and is smaller on the arm.
this is used with these spacers https://www.thingiverse.com/thing:2567645
thingiverse
free
Webcam (Logitech C270) Mount for Monoprice Select Mini 3d Printer by sefjqf
...tter on the center of the bed plate - otherwise prints near the front of the bed plate will be out of focus. takes a few minutes.
thingiverse
free
Webcam (Logitech c270) Mount for Monoprice Maker Ultimate (Duplicator 6) by sefjqf
...ount that puts the camera further away from the printer bed, but now can show most of the print bed in the image. improves view.
thingiverse
free
Logitech C270 Tripod Mount by adamoell
...bite" into - no nut should be needed.
hopefully you can just use the stl, but the openscad source is provided just in case.
thingiverse
free
Logitech C270 mount by chain256
...assemble the mount. remove small rubber pads from each side. there is one screw on the side holding the mount to the camera case.
thingiverse
free
CR-6 SE C270 No Modifcation Camera Mount by ThingaUser
...ll of the x-axis movement for prints should be visible, and i have added a spot for a cable tie to keep the cable out of the way.
thingiverse
free
Logitech c270 CR-10 Camera Mount Re-mix
...sed petg for its stability. so far i have gotten some really good results.
if you print this, please let me know what you think.
Digchaos
thingiverse
free
#TheViewage by DigChaos
...#theviewage by digchaos
thingiverse
theviewage battery logo from cdnthe3rd on twitch.
thingiverse
free
Marijuana spinner cap by DigChaos
...marijuana spinner cap by digchaos
thingiverse
added a marijuana cap for spinners. print at 102%.
thingiverse
free
Yongnuo 560 Diffuser by DigChaos
...yongnuo 560 diffuser by digchaos
thingiverse
remix of a snooth for a yongnuo 560. turns the snoot into a diffuser.
thingiverse
free
Melting Lollipop by DigChaos
...t down to fit your printer. i printed one at 30% and 55% and tolerances were good.
thanks to jonasrh for the dual color version!
thingiverse
free
Confetti pop cannon by DigChaos
...little cannon that uses those confetti poppers are ammunition.
video if it in action! https://www.youtube.com/watch?v=i95h9tbpq4u
thingiverse
free
Chicken Foot game board by DigChaos
...a.org/wiki/chicken_foot_(game)
a board to start chicken foot dominoes game. made to be used with dominoes measuring 1 x 2 inches.
thingiverse
free
Hanging Spool mount by DigChaos
...nts from under my shelf.
if you want to cut down on the friction you can use some low friction tape like this http://a.co/blknt1q
thingiverse
free
Thanksgiving Turkey Earrings by DigChaos
...thought i'd share since they're pretty funny. for the hooks i just used some cheap ones off of amazon http://a.co/1h9x3nl
thingiverse
free
1U Bracket with cable management by DigChaos
...d some 1u brackets to mount it, the cat6 just kind of dangled there so i made a mount that let me hold the cables out of the way.
thingiverse
free
LED adapter for XCSOURCE LED lights by DigChaos
...tra thin dimmable led strip from amazon.
http://a.co/95oxy39
i also included a picture of how i orientated the part for printing.
C270
turbosquid
$25
Webcam Logitech C270
... model webcam logitech c270 for download as 3ds, obj, and 3dm on turbosquid: 3d models for games, architecture, videos. (1319945)
thingiverse
free
C270 Holder for CRX
...c270 holder for crx
thingiverse
c270 holder crx...
thingiverse
free
C270 beugel by EBTronics
...c270 beugel by ebtronics
thingiverse
corner bracket for c270 webcam in lack enclosure
thingiverse
free
Mini C270 by Sp0nge
...mini c270 by sp0nge
thingiverse
mini logitech c270 case
open and closed.
thingiverse
free
C270 logitech by CerveauChat
...c270 logitech by cerveauchat
thingiverse
support 2020 pour caméra c270 et c170
thingiverse
free
C270 Support
...70 support
thingiverse
c270 support for a 30mm top table. rotating base due to a screw.
materials:
1x m3x12
4x m3x25
3x m3 nuts
thingiverse
free
BW-Bracket-C270 by dmelle
...bw-bracket-c270 by dmelle
thingiverse
bw-bracket-c270
thingiverse
free
C270 FishEye Optic by NedalLive
...c270 fisheye optic by nedallive
thingiverse
stand for fisheye optique c270
thingiverse
free
C270 SMD LED mount
...c270 smd led mount
thingiverse
front mount of leds for logitech c270
thingiverse
free
C270 Logitech Holder by nicoflood
...c270 logitech holder by nicoflood
thingiverse
logitech c270 webcam holder rmx
Logitech
3ddd
$1
Logitech Z623
...logitech z623
3ddd
logitech , колонки
колонки logitech z623
3ddd
free
Logitech C500
...logitech c500
3ddd
logitech , вебкамера
logitech c500 webcam
3ddd
free
Клавиатура Logitech
...атура logitech
3ddd
logitech , клавиатура
беспроводная клавиатура logitech с подсветкой.
3ddd
$1
logitech revolution
... revolution , мышь
mental ray, logitech revolution
3ddd
$1
Logitech LS21
...logitech ls21
3ddd
logitech , колонки
гламуррррненько =)
3ddd
$1
колонки Logitech z906
...колонки logitech z906
3ddd
logitech
logitech z906
3ddd
$1
Logitech x-530
... акустика , колонки
колонки logitech x-530
текстуры присутствуют
turbosquid
$5
Logitech Speakers
...uid
royalty free 3d model logitech speakers for download as on turbosquid: 3d models for games, architecture, videos. (1712072)
turbosquid
free
Logitech Speaker
...urbosquid
free 3d model logitech speaker for download as fbx on turbosquid: 3d models for games, architecture, videos. (1552574)
3ddd
$1
Трекбол Logitech M570
... logitech
модель популярного трекбола logitech m570. материалы corona, turbosmooth на большинстве элементов не свернут.
Cr
turbosquid
$15
Creazioni CR-673 CR-4461
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Ravak CR 055.00
...ravak cr 055.00
3ddd
ravak , смеситель
ravak cr 055.00
turbosquid
$100
CR-002
...
turbosquid
royalty free 3d model cr-002 for download as stl on turbosquid: 3d models for games, architecture, videos. (1686037)
3ddd
$1
Ravak CR 012.00
...ravak cr 012.00
3ddd
ravak , смеситель
смеситель ravak cr 012.00
3ddd
free
Консоль CR Currin
...ь , cr currin
консоль cr currin
ширина - 1675 мм
глубина - 510 мм
общая высота - 810 мм
3ddd
$1
CR 39444
...0
диаметр: 100
тип патрона: gu5,3 gu10
количество ламп: 1
мощность: 35w
цвет: золото хрусталь
материал: металл хрусталь exclusive
3d_ocean
$89
Honda CR-Z
...www.youtube.com/watch?v=rrbb4d4lypk ` he honda cr-z‘s exterior styling is formed around a “one-motion wedge” concept with a lo...
3ddd
$1
Creazoni / STEFY CR-8901
...creazoni / stefy cr-8901
3ddd
creazoni
creazioni stefy cr-8901
turbosquid
$60
Chain-CR-001
...squid
royalty free 3d model chain-cr-001 for download as stl on turbosquid: 3d models for games, architecture, videos. (1680536)
turbosquid
$99
Honda CR-Z
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
10
turbosquid
$25
10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
a-10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
EX 10
...ex 10
3ddd
samsung , фотоаппарат
ex 10
3ddd
$1
Bed 10
...bed 10
3ddd
постельное белье
bed 10
evermotion
$25
Scene 10 Archinteriors vol. 10
...dering design interior
take a look at textured and shadered visualization scene ready to be rendered.. evermotion 3d models shop.
3ddd
$1
Curtains 10
...curtains 10
3ddd
curtains 10
3ds max 2011,fbx + textures
polys: 100355
3ddd
free
PLANTS 10
...plants 10
3ddd
цветок , горшок
plants 10,, with 3 different color planter boxes
turbosquid
$24
Chandelier MD 89310-10+10 Osgona
... chandelier md 89310-10+10 osgona for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1218762)
design_connected
$29
Nuvola 10
...nuvola 10
designconnected
gervasoni nuvola 10 computer generated 3d model. designed by navone, paola.
design_connected
$22
Kilt 10
...kilt 10
designconnected
zanotta kilt 10 computer generated 3d model. designed by progetti, emaf.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)