Thingiverse
LM2596 Enclosure by Klave
by Thingiverse
Last crawled date: 3 years ago
Thing 1625233 doesn't work for my boards, the holes in the board are wrong and the trimpot is off to the side. The pins that go through the board are too thick and I had to cut them off.
This is a version that fits my boards, I've included a picture for you to compare.
I added some vents to release internal heat and also included a version that has the connection leads off to the side so that the capacitor isn't in the way.
The boards are slightly asymmetrical so I marked the IN and OUT ends so you can align the board. The lid will fit both ways so make sure you check the pot is visible.
For the side entry the lid will only fit one way
This is a version that fits my boards, I've included a picture for you to compare.
I added some vents to release internal heat and also included a version that has the connection leads off to the side so that the capacitor isn't in the way.
The boards are slightly asymmetrical so I marked the IN and OUT ends so you can align the board. The lid will fit both ways so make sure you check the pot is visible.
For the side entry the lid will only fit one way
Similar models
thingiverse
free
Dome Lid Holder for Click and Grow Smart Garden 9 by codexlibris
...int with supports for the hook only.
there's also a shorter version that stands on its own - no supports needed for that one.
thingiverse
free
Raspberry Pi Relay Case by markr959
... screwed it up and i didn't want to print a whole new one.
there are 2 holes in the base to screw it on to whatever you want.
thingiverse
free
1/4-20 Bolt Knob by B_Rich
...ob that i printed off thingiverse didn't fit so i made my own. print knob side down (it should already be oriented that way).
thingiverse
free
Ramps cover rework by stuart2011
... like the new boards have relocated the components on the boards. so i made some adjustments to this work of art to make it work.
thingiverse
free
Basys-3 Housing
... make a lid for it, but if you want to make one, or remix it, here is the fusion360 link to the project. https://a360.co/2r3fm7u
thingiverse
free
MTG deck box (needs a make)
...his i may adjust the lid for you if you find any mistakes that the lid or cards won't fit.
as far as i can see it should fit.
thingiverse
free
USB Case & Lid
...having to plug in my entire bundle of keys into the computer when i use my usb, this way you also won't loose the lid easily.
grabcad
free
MR2 Spyder Engine Lid Prop Rod Clip
... want at least one flat side, i included "easy print" versions with one side of the shroud removed so the side is flat.
thingiverse
free
Parametric Card Caddie and Lid - Stackable by cdburgess
... was no lid. so i added the lid. it wouldn't make sense to use the lid if you turn off the stackable options. but here it is.
thingiverse
free
IRIS name Box with flowers on top - Plain Version as well by jolars
...so this can be for anyone. i have a similar style box on my desk that i put small...
Klave
thingiverse
free
Dremel Nut by Klave
... scaled 101% in the radial directions to make the fit slightly looser but 100% threaded on fine
lay it on its front face to print
thingiverse
free
YAFS Yet another end of of filament sensor by Klave
...x 5.7 mm like these https://www.amazon.ca/gp/product/b07dgx9b9c)
it also doubles as an equally unnecessary filament guide
ender 3
thingiverse
free
Hex bit finger wrench by Klave
...tool holder so i can easily place and remove it. i also put a magnet in the wrench top to stick it to the nearest piece of steel.
thingiverse
free
Filter Sieve by Klave
...s, the bars are an easy distance to bridge, only 3.6mm, and the sides taper at 24 degrees from vertical so no supports are needed
thingiverse
free
CNC Tool Probe by Klave
...e that theirs is normally open and they had to set the probe as active low. this is not needed for my probe which is active high.
thingiverse
free
Honda Civic 2008 Front Emblem by Klave
...ted it, i just made a curved version of the flat one and added the two pins, about 2mm long. you will need supports for this one.
thingiverse
free
K40 mA meter Bezel by Klave
...high voltage on them.
the meter face is 56mm x 64mm and the large round section has a diameter 49mm
mine is similar to this meter
thingiverse
free
Zero Probe by Klave
...rotrude past the print head then you could use it but there are many available options for bed leveling that don't need this.
thingiverse
free
K40 mirrors by Klave
... had this experience, feel free to feed back to the mirror suppliers that their compatibility with k40 is marginal and deceptive.
Lm2596
thingiverse
free
lm2596s
...lm2596s
thingiverse
enjoy 3d priter~^^
thingiverse
free
LM2596S Case
...lm2596s case
thingiverse
lm2596s case with optional hold for ender 3 pro
thingiverse
free
LM2596 Aliexpress
...lm2596 aliexpress
thingiverse
lm2596 from aliexpress, a little bit different in size.
thingiverse
free
LM2596S Gehäuse by windischb
...lm2596s gehäuse by windischb
thingiverse
lm2596s gehäuse
thingiverse
free
LM2596 case by RCChris
...lm2596 case by rcchris
thingiverse
lm2596 raspberry pi
thingiverse
free
LM2596 case by Yeti1994
...lm2596 case by yeti1994
thingiverse
lm2596 case for elettronic applications
thingiverse
free
LM2596 holder by jscottb
...lm2596 holder by jscottb
thingiverse
lm2596 power supply breakout board mount.
thingiverse
free
LM2596 Case by oksaeger
...lm2596 case by oksaeger
thingiverse
case for lm2596 dc-dc buck converter.
thingiverse
free
LM2596 Mount
...ount.
uses two m2.5 x 4mm (or 3mm) screws to mount the module to the mount and two m4 x whatever length you need to hold it down.
thingiverse
free
LM2596 BOX by LordCarvalho
...lm2596 box by lordcarvalho
thingiverse
this is a remix from https://www.thingiverse.com/thing:2629075
fits lm2596 60*40
enjoy
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)