LipoLeds by Proty

Last crawled date: 3 years ago

Mira este video ilustrativo para colocarlo: https://youtu.be/oJPGsnE_wec
IMPORTANTE: Es fundamental aislar las soldaduras con cola caliente o similar para prevenir cortocircuitos al ponerlo en contacto con nuestro frame de carbono. También es fundamental conectar el cable de balanceo siempre utilizando los pines de los extremos. De lo contrario se podría desbalancear la lipo.
Imprimir en TPU.
Se necesita:

2 tiras de leds: https://www.banggood.com/Diatone-3-4S-LED-Decoration-Board-Strip-Set-For-250-Class-Frame-p-961260.html?rmmds=myorder&cur_warehouse=CN

Conector de balanceo de lipo hembra de 4s o 3s (Según la lipo que uses):https://www.banggood.com/10Pairs-22AWG-150mm-2S-3S-4S-5S-6S-LiPo-Battery-Male-Female-Connector-Plug-Balance-Cable-p-1102076.html?rmmds=search
Usar bajo tu propio riesgo.
Look at this illustrative video: https://youtu.be/oJPGsnE_wec
IMPORTANT: It's so important to isolate all the solderings pads with hot glue or similar in order to prevent shortcuts with the carbon fiber of your frame. Always use the extreme pins of the balance plug of your lipo. Otherwise your lipo could be unbalanced.
Print it in TPU.

You need the leds: https://www.banggood.com/Diatone-3-4S-LED-Decoration-Board-Strip-Set-For-250-Class-Frame-p-961260.html?rmmds=myorder&cur_warehouse=CN

And a 4s or 3s female balance plug (Depends what lipo are you using):https://www.banggood.com/10Pairs-22AWG-150mm-2S-3S-4S-5S-6S-LiPo-Battery-Male-Female-Connector-Plug-Balance-Cable-p-1102076.html?rmmds=search
Use at your own risk.