Cults
Linus van Pelt
by Cults
Last crawled date: 6 years, 1 month ago
Linus van Pelt, from the comic strip Peanuts by Charles Schulz.
Linus is the best friend of Charlie Brown and is also the younger brother of Lucy van Pelt.
Though young, Linus is very intelligent and very wise, and acts as the strip's philosopher and theologian.
The model is in proportion to my Charlie Brown and Lucy van Pelt models.
No supports are required. If you have the proper filament colors, no painting is needed.
Don't let the number of pieces or my lengthy notes worry you, it's a reasonably quick print and very, very easy to assemble.
The model is 140mm tall.
Enjoy!
-----------------------------------------------------------------
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
-----------------------------------------------------------------
Building the model
Colors (there are no multiple printed pieces)
Black:
hair
eyes
mouth
eyebrows
pants
shirt_black_1
shirt_black_2
shirt_black_3
shirt_black_4
shirt_black_5
shirt_black_6
shirt_black_7
shirt_black_8
shirt_black_9
shirt_black_10
..
Beige or Flesh:
head_top
head_bottom
arm_left
arm_right
legs
..
Brown:
shoes
..
Light Blue:
blanket
..
Red:
socks
shirt_red_1
shirt_red_2
shirt_red_3
shirt_red_4
shirt_red_5
shirt_red_6
shirt_red_7
shirt_red_8
shirt_red_9
shirt_red_10
shirt_red_11
..
Any color (hidden pieces)
head_pins
shirt_pin
-----------------------------------------------------------------
Printing and assembly tips
Printing tips
1-As with most of my models, no supports are required.
2-The arms are tall with a small base, so I used a brim on those two pieces.
3-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish.
..
Assembly tips:
1-The left/right eyes and eyebrows are interchangeable.
2-The leg holes in the pants should be positioned toward the back.
3-The left/right shoe parts are not interchangeable but are easy to distinguish which is left and right.
4-The left right pieces of the sleeves of the shirt are NOT interchangeable, so take some care in placing them before gluing.
5-When putting the shirt together the holes for the shirt pin is positioned towards the back. The side of each shirt part that was on the printer bed will always face down as you slide each piece through the shirt_pin. Similarly, when sliding the arm pieces on to the shirt_black_6 piece (which acts as a pin) the side that was on the printer bed will face the body.
6-The hair is quite simple. It is printed flat. After removing it from the printer bed, you need to curl each individual hair similar to how you would curl a ribbon. Be sure to curl the all the hair strands in the same direction and start from the 'root'. This results in what looks like spider legs. Position the root in the back/top of the head and adjust for the desired look as you glue it down. There is no 'notch' to be matched.
6-I glued the head/blanket/arm_left all in together to the body at the same time. The blanket does not necessarily need to touch the ground. I did it this way to ensure the model stands stable on the shoes and the blanket does not cause any balancing issue.
*Refer to the assembly diagrams in the pictures section for putting the model together. (for some unknown reason I cannot load the assembly diagrams in the narrative section). The model is meant to be glued.
Linus is the best friend of Charlie Brown and is also the younger brother of Lucy van Pelt.
Though young, Linus is very intelligent and very wise, and acts as the strip's philosopher and theologian.
The model is in proportion to my Charlie Brown and Lucy van Pelt models.
No supports are required. If you have the proper filament colors, no painting is needed.
Don't let the number of pieces or my lengthy notes worry you, it's a reasonably quick print and very, very easy to assemble.
The model is 140mm tall.
Enjoy!
-----------------------------------------------------------------
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
-----------------------------------------------------------------
Building the model
Colors (there are no multiple printed pieces)
Black:
hair
eyes
mouth
eyebrows
pants
shirt_black_1
shirt_black_2
shirt_black_3
shirt_black_4
shirt_black_5
shirt_black_6
shirt_black_7
shirt_black_8
shirt_black_9
shirt_black_10
..
Beige or Flesh:
head_top
head_bottom
arm_left
arm_right
legs
..
Brown:
shoes
..
Light Blue:
blanket
..
Red:
socks
shirt_red_1
shirt_red_2
shirt_red_3
shirt_red_4
shirt_red_5
shirt_red_6
shirt_red_7
shirt_red_8
shirt_red_9
shirt_red_10
shirt_red_11
..
Any color (hidden pieces)
head_pins
shirt_pin
-----------------------------------------------------------------
Printing and assembly tips
Printing tips
1-As with most of my models, no supports are required.
2-The arms are tall with a small base, so I used a brim on those two pieces.
3-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish.
..
Assembly tips:
1-The left/right eyes and eyebrows are interchangeable.
2-The leg holes in the pants should be positioned toward the back.
3-The left/right shoe parts are not interchangeable but are easy to distinguish which is left and right.
4-The left right pieces of the sleeves of the shirt are NOT interchangeable, so take some care in placing them before gluing.
5-When putting the shirt together the holes for the shirt pin is positioned towards the back. The side of each shirt part that was on the printer bed will always face down as you slide each piece through the shirt_pin. Similarly, when sliding the arm pieces on to the shirt_black_6 piece (which acts as a pin) the side that was on the printer bed will face the body.
6-The hair is quite simple. It is printed flat. After removing it from the printer bed, you need to curl each individual hair similar to how you would curl a ribbon. Be sure to curl the all the hair strands in the same direction and start from the 'root'. This results in what looks like spider legs. Position the root in the back/top of the head and adjust for the desired look as you glue it down. There is no 'notch' to be matched.
6-I glued the head/blanket/arm_left all in together to the body at the same time. The blanket does not necessarily need to touch the ground. I did it this way to ensure the model stands stable on the shoes and the blanket does not cause any balancing issue.
*Refer to the assembly diagrams in the pictures section for putting the model together. (for some unknown reason I cannot load the assembly diagrams in the narrative section). The model is meant to be glued.
Similar models
cults
free
Lucy van Pelt
...piece for a better fit. 3-the left/right shoulders look similar but are slightly different, so take care when connecting...
cults
free
Snoopy
...itioning of the text characters.
3-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Charlie Brown
...hand were it touches the stripe.
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Crocodile
...re no left/right differences.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
Pig
...re no left/right differences.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
George Jetson
...hile putting the model together.
6-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
$2
Snoopy
...snoopy
cults
snoopy toy peanuts charlie brown print
snoopy
cults
free
Dogbert
...nto the notch on the body above the nose and glued them into the glasses_arms. it all turned out quite simple to glue into place.
cults
free
Dilbert
...eces together to create the full tie separately. i suggest attaching the completed tie to the rest of the model as the last step.
cults
free
Barney Rubble
...he head to for full alignment.
..
2-refer to the assembly diagram for putting the model together. the model is meant to be glued.
Linus
cults
free
Snoopy
...brown: https://cults3d.com/en/3d-model/various/charlie-brown lucy van pelt: https://cults3d.com/en/3d-model/various/lucy-van-pelt linus van pelt: https://cults3d.com/en/3d-model/various/linusvan-pelt enjoy! ------------------------------------------------------------ print settings printer: flashforge creator x rafts:...
cults
free
Lucy van Pelt
...girl who bullies other characters in the strip, particularly linus and charlie brown. while she is not exactly cold-hearted,...
cults
$17
Nuclear bomb PC case. "Nuke"
...the thread for my build can be found here: https://linusechtips.com/main/topic/870122-custom-3d-printed-fallout-nuke-case/ cpu temperatures are fine, but gpu temperatures were a...
Pelt
cults
free
Lucy van Pelt
...inguish which is left and right.
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Snoopy
...brown: https://cults3d.com/en/3d-model/various/charlie-brown lucy van pelt: https://cults3d.com/en/3d-model/various/lucy-van-pelt linus van pelt: https://cults3d.com/en/3d-model/various/linus-van-pelt enjoy! ------------------------------------------------------------ print settings printer: flashforge creator x rafts:...
cults
free
Topographic map of Grand Teton, Wyoming
...who gave it that name. in search of beaver pelt they discovered this area in the 18th century. at...
Peanuts
cults
free
Peanuts
...peanuts
cults
cartoon logo magnet toy
ai to blender
cults
free
Peanut Butter Bird Feeder
...peanut butter bird feeder
cults
peanut butter bird feeder
peanut butter bird feeder
cults
$2
Snoopy
...snoopy cults snoopy toy peanuts charlie brown print...
cults
free
woodstock
...woodstock cults bird comics figure figurine peanuts snoopy make with...
cults
free
Wooden bowl
...cults wooden bowl wood filament house home candies sweets peanuts dinner table wood container vase kitchen...
cults
free
Squirrel fence feeder
...fill with whatever you feed them (i use shelled peanuts ...
cults
free
Snoopy
...snoopy cults peanuts comics cartoon snoopy, from the comic strip peanuts by...
cults
$3
Tray for aperitif
...a central tray. each compartment has its own name, "peanutsquot;, "chips", "cheese", "olives", "sausage". the central tray is called...
cults
free
Modular bathtub deck
...the combo: bath & football match & beer & peanuts construction stage: • get a wooden board dimensions l...
cults
free
Charlie Brown
...charlie brown cults peanuts comics cartoon charlie brown, from the comic strip peanuts...
Van
cults
free
Hoang Van Khoi
...hoang van khoi
cults
ct
3d hoang van khoi
cults
$29
Vans RV-10
...ans rv-10 3d print model
vans rv-10 ready for 3d printing.
use the "scale" option to resize the model to your liking.
cults
$8
VILAIN JEAN CLAUDE VAN DAMME
... damme
bust of jean claude van damme in the role of "vilain" in "expendables 2".
base and glasses included.
cults
$5
hippies van
...e upper windows. it's up to you, considering the properties of your printer, to choose which one to use.
enjoy your printing!
cults
free
BLACK GLASSES FOR JEAN CLAUDE VAN DAMME EXPENDABLE
... bust before the glasses are made. now it's useless to download them because they are included with the purchase of the bust.
cults
$15
Sliding door replacement for Vivaro Trafic Primastar vans
...ic renault opel nissan
sliding door inboard replacement for vivaro trafic primastar vans.
replacement for part number: 7700352585
cults
free
Snail Mail Van
....
the steering wheel is supposed to look like a slice of orange or similar citrus, and the truck is driven by an ant postman xd
cults
free
80's van body for the Ursa monster truck
...
https://www.banggood.com/20w-electric-hot-melt-glue-gun-sticks-trigger-with-50-glue-sticks-p-961296.html?p=hd240528697332015103
cults
free
Lucy van Pelt
...inguish which is left and right.
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
Comics
cults
free
comic dog belgium
...comic dog belgium cults belgium comics dog tintin snowy milou personnel works with...
cults
free
Comic Book Tabs
...comic book tabs cults comics comic_books dc_comics marvel_comics the abc tabs are the same...
cults
$3
Dory 3D Comic Fish
... the color information like you see on the photos. dory consists of 2 parts. once the comic fish and the second part is the base.
cults
free
Pickles - comic strip scene
...included below.
the completed model after assembly is 128mm x 189mm x 203mm high and none of the parts require supports!
enjoy!
cults
free
Magnet Tintin et Milou
...magnet tintin et milou cults belgium comics tintin best hero from belgium...
cults
free
Logo Flash!
...logo flash! cults flash logo super hero comics dc comics here is the flash logo for 3d...
cults
free
Spy vs Spy
...spy vs spy cults comics retro spy video_game inspired by spy vs. spy the...
cults
$1
Figurine Venom
...figurine venom cults venom spiderman marvel dc dc comics comics bd figurine keychain key holder figurine of venom,...
cults
$2
FROG FRIEND
...l
frog to support papers, pictures and notes.
it is inspired on a frog´s image. i gave it a comic style to make it more funny.
cults
free
Mjolnir
...hero 3d model of thor's hammer mjolnir from the comicsfilms. hope you like...
Cartoon
cults
$1
cartoon bust HD
...cartoon bust hd
cults
chest cartoon toys figurine
cartoon bust modeled in hd
cults
free
Cartoon Hand Rock
...ts
cartoon hand hands anet a6 duke doks human paint spray sculpture
https://www.youtube.com/watch?v=l81uands0ay
cartoon hands!!!
cults
free
Cartoon Hand Adams
...ts
cartoon hand hands anet a6 duke doks human paint spray sculpture
https://www.youtube.com/watch?v=l81uands0ay
cartoon hands!!!
cults
free
Cartoon Hand Like
...ts
cartoon hand hands anet a6 duke doks human paint spray sculpture
https://www.youtube.com/watch?v=l81uands0ay
cartoon hands!!!
cults
$2
3d cartoons printer nozzle
...nd / cartoon 3d printer nozzle
height of printing 20 cm
for printing it has been cut in 2 to facilitate the removal of media.
cults
$6
voiture cartoon
...voiture cartoon
cults
petite voiture pour enfant
imprimée en 1 bloc, les roues peuvent tourner
cults
free
cartoon phoenix
...anel pattern
stl,obj,jdp,rlf format.phoenix model of bas-relief.
follow me,you will get more free and cheap models.
best regards.
cults
$1
Cat cartoon style
...he "[wooden cat statue](https://skfb.ly/68ngn)" by 3dhdscan licensed under cc attribution. i cleaned the original scan.
cults
$1
Cartoon helicopter
...rsonalize: choose the colors of your filaments, print the parts separately (no need for support) and assemble (no need for glue).
cults
$3
cartoon woman figurine bust
...rintable model (example in photos with 17 cm high)
files in the format obj + tattoo image and logo for printing on blank decal.