Light Revolver by VillardDeHonnecourt

Last crawled date: 3 years, 2 months ago

After doing the first torch holder, I realized one color is for chumps - and I like the idea of publishing something called "light revolver". It comes in five parts that snap together and can also be disassembled without breaking anything. For the 14mm torch, the rifled socked is tight enough that the rear end can be switched on without the front turning, but loose enough the torch can be easily pulled. Pockets on the disk can hold transparent paper or flash light filters, with plenty of space for multiple layers, e.g. to mix or intensify colors. No glue required, and there´s enough material to block stray light even with my white filament.
There´s a little spring bit on the axle part which means the disk clicks into the six circumferential position. I use color for five and leave one open (i.e. white), in the photos, the five colors are a standard rainbow of primaries.
Without wanting to promote anything, these are the non-printed parts I used:
https://www.amazon.de/-/en/gp/product/B078PLRBHW/ref=ox_sc_rp_title_rp_11?smid=&psc=1&pf_rd_p=dff598eb-a7ff-48cc-a220-08f0313ec1c5&pd_rd_wg=NykqF&pd_rd_i=B078PLRBHW&pd_rd_w=PKakA&pd_rd_r=162d1076-a081-4d6f-b2b2-e00adc0987b1
https://www.amazon.de/-/en/gp/product/B07Q4C6TVF/ref=ox_sc_rp_title_rp_1?smid=&psc=1&pf_rd_p=dff598eb-a7ff-48cc-a220-08f0313ec1c5&pd_rd_wg=NykqF&pd_rd_i=B07Q4C6TVF&pd_rd_w=PKakA&pd_rd_r=162d1076-a081-4d6f-b2b2-e00adc0987b1