Thingiverse
Leg Lamp Remixed
by Thingiverse
Last crawled date: 4 years, 4 months ago
This model is 500% the original model, if you change the scale the screws and nuts won't fit, this one is about 900mm tall including the base and lamp shade. I've changed a few things from this awesome model by jetpuf and they are as follows:
The original had the wire exposed between the arch of the heel and the base, I created a tunnel to conceal this.
I added M4 size nut inserts to the bottom of the shoe, push some nuts in there to make sure they fit nice then put a dab of super glue and the nuts in. if they do not fit, I just went arounf the edge lightly with an xacto knife until it fit, remember check before gluing!
I added inset holes to the base for M4 screws to be placed through the bottom of the base and to be screwed into the M4 nuts that were put into the bottom of the shoe as mentioned in point number 2.
The thigh is printed upside down to reduce supports becuase I made the neck of the hole smaller to be able to cut threads for a 1/4" hollow threaded rod which the power cable will pass through. The thigh will need supports but it's very very very very very minimal. If the hole is too small, just drill it out a bit. I added some superglue down the threads of the bottom of the rod after I screwed it in as well.
If you have never made a lamp before like me before I made this, it's a super easy project! I used a kit like this:
https://www.canadiantire.ca/en/pdp/atron-lamp-kit-with-harp-0523573p.0523573.html?gclid=Cj0KCQiAmsrxBRDaARIsANyiD1rpzR5XuhSCq6vr1oRlqXRh35b9K5FQuKenIC8zcPVB3qCS5x28vbcaAghLEALw_wcB&gclsrc=aw.ds#store=614
And watched this 3 min video:
https://www.youtube.com/watch?v=B68Y4hjY_d0
That should be all you need!
The original had the wire exposed between the arch of the heel and the base, I created a tunnel to conceal this.
I added M4 size nut inserts to the bottom of the shoe, push some nuts in there to make sure they fit nice then put a dab of super glue and the nuts in. if they do not fit, I just went arounf the edge lightly with an xacto knife until it fit, remember check before gluing!
I added inset holes to the base for M4 screws to be placed through the bottom of the base and to be screwed into the M4 nuts that were put into the bottom of the shoe as mentioned in point number 2.
The thigh is printed upside down to reduce supports becuase I made the neck of the hole smaller to be able to cut threads for a 1/4" hollow threaded rod which the power cable will pass through. The thigh will need supports but it's very very very very very minimal. If the hole is too small, just drill it out a bit. I added some superglue down the threads of the bottom of the rod after I screwed it in as well.
If you have never made a lamp before like me before I made this, it's a super easy project! I used a kit like this:
https://www.canadiantire.ca/en/pdp/atron-lamp-kit-with-harp-0523573p.0523573.html?gclid=Cj0KCQiAmsrxBRDaARIsANyiD1rpzR5XuhSCq6vr1oRlqXRh35b9K5FQuKenIC8zcPVB3qCS5x28vbcaAghLEALw_wcB&gclsrc=aw.ds#store=614
And watched this 3 min video:
https://www.youtube.com/watch?v=B68Y4hjY_d0
That should be all you need!
Similar models
thingiverse
free
T-NUT M4 by TerxoGame
... thread
!!update!!
i print it horizontally, in nylon (yellow), very strong results
the thread is fitting perfectly with the screw
thingiverse
free
Cupboard Towel Hook / Holder by lachycharts
...the hole and nut you just put in.
if it doesn't fit snuggly on the door, put a little silicon pad on the inside of the mount.
thingiverse
free
Lamp base by wsreith
...ing with shorter m4 screws helps)
optional m4 x 20mm socket cap to lock lamp post (hex nut drops into slot inside lamp post hole)
thingiverse
free
Printrbot PLUS v2.0 X Rod Mount (Remix) by VintageTimeAustralia
...than the kit stock unc screws. i found the stock screws had a tendency to back off after a while. the m4's don't do that.
thingiverse
free
Clamp for Tronxy X1 Control Box Base - No need to drill acrylic by Ganderloof
... and nut holder
2x m4 screw of sufficient length.
2x m4 nut
2x m4 washer
this clamp should work with other case/base/box designs.
thingiverse
free
CR-10 Dial Indicator Holder - Nexi-Tech Fan Upgrade - Screw Added by kaju666
...es with nexi-tech fan upgrade.
i just added a hole for m4 screw with thread so you don't need a nut.
designed in tinkercad :)
thingiverse
free
Candle stick lamp by dgamble2005
...way so i made a different adaptor included in files.
lamp shade design can be found herehttps://www.thingiverse.com/thing:2922028
thingiverse
free
Dual Z Rod Holder support by fwm
...ed the screws below
4x 20mm m3 screws
4x m3 nuts
4x m3 washer
4x m4 t nuts
4x m4 10mm screws
2x (8x16x5mm) bearing model 688-2rs
thingiverse
free
Channel lock pliers I modified for compression fittings by angrycannibal
...hem.
i made a version with the original scaling (35mm) and a scaled down version(26mm) specifically for my compression fittings.
thingiverse
free
New parts for Dremel Press Remix by rafaelguima
...t fits better a 8mm thread rod;
a lock that prevrents the sliding bush getting out of his place;
a knob that use lesser material.
Leg
3d_ocean
$10
Furniture Legs
...furniture legs
3docean
furniture furniture legs leg legs metal leg
furniture legs,legs,
archibase_planet
free
Leggings
...eggings
archibase planet
leggings gaiters gaiter clothes
leggings n140713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$4
Chicken legs
...chicken legs
3docean
3ds arman3dg chicken chicken legs games legs low max poly
chicken legs…
turbosquid
$1
legging
...ng
turbosquid
royalty free 3d model legging for download as on turbosquid: 3d models for games, architecture, videos. (1569799)
3d_export
$25
table leg
...table leg
3dexport
table leg with ram
turbosquid
$19
Leg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
lion leg
...lion leg
3dexport
3d lion leg for cabinet
3d_export
$5
table leg
...table leg
3dexport
table leg for wood milling machine
3ddd
$1
Leg Exercise
...leg exercise
3ddd
тренажер
leg exercise equipment fitness
3d_export
$5
two-legged hook
...two-legged hook
3dexport
two-legged hook
Remixed
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...ture/black, nature/oak, remix 133/grey, remix 183/black, remix 643/dusty red, black silk leather/black, cognac silk leather/black
3ddd
$1
Barovier&Toso 7190-7195
...лочнай люстра фабрики barovier&toso;, коллекция manhattan remix, артикул 7190-7195.
размеры в inches: 39" 1/2wх26"h
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixed no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...bj .mb .lwo .fbx .c4d .3ds - htc one mini 2 amber gold 3d model, royalty free license available, instant download after purchase.
Lamp
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp lantern
lamp - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$6
Lamp
...lamp
3docean
lamp
a high quality lamp.