LED Round Mirror by Zugara

Last crawled date: 3 years ago

This is an LED mirror frame.
You will need to buy a round mirror that fits in the mirror holder, LED strip to go into the slot in front of the mirror, a power supply to power the LED strip plus glues.
I have not printed this so, print at your own risk/time/filament.....I had planned to infill the base at 20%, then fill with sand prior to the top layer being printed, just to add some weight to the base.
Diameter of the mirror is 90mm, therefore you will need a mirror of 180mm across, and no more than 5mm thick.
LED strip, no more than 5mm wide, any colour. LED wires pass through the hole at the bottom of the round mirror frame.
Slicing it, look like there is more than 45 hours print time for all components. If you scale it down, the LED strip wont fit into the slot.
My other useful things:https://www.thingiverse.com/thing:2110580https://www.thingiverse.com/thing:2047623