LED Mount Ender 2 / CR10 Mini / CR10 / With Cover by mav68erick

Last crawled date: 3 years, 1 month ago

Edit* Updated - Added a cover shade for the CR10. With 2 rows of leds, light was real bright and bothered my eyes, so i made a cover. Printed this in just white Pla straight to glass to get smooth surface. Same dimensions as the led mount. Just super glued in place, will add Ender 2 Cover soon.
This is a mount for Led Light strips. These mount on the opposite side of the 20x20mm extrution on creality printers.
The smaller 125mm O.A.L. is for the Creality Ender 2. And the longer one is for a CR10 Mini. it is 225mm Long. It should fit a CR10 if the bed width is the same 300mm.
I just used the sticky tape on the back of the LED to attach 2 strips of lights to it. I first sanded it to rough it up as the glass left it smooth.
The Brackets have a 3mm Hole, and can be mounted via T- Nut / Hammer Nut. Also Added a Couple slots to snake the wires through, I used it as a spot to add Hot glue.
Printed with -
Need to rotate part 45* from the ThingyView. Like I have in Cura as example.
No Support
10-15% infill
.2 Layer
60mm Feed
The top brackets being small start to curl, so you can manually adjust speed down to about 35mm/s or in S3d slow it down for those layers. the first one I did is fine, just looks a little sad.