Leatherworking Stamp Blank (30mm Craftool design) by CalgaryToad

Last crawled date: 3 years, 1 month ago

This leather stamp was designed after the Crafttool branded leather working stamp kit and is tested working with the Craftool Hefty Handle 8197-00. If you do not have a Hefty Handle applying pressure directly at the center of the stamp and striking it will work. Try not to strike the stamp with a mallet as it will not last very long.
How do I use it?

Import STL into program of choice and create design. Remember you must mirror all of the design for it to appear right side up when stamped. (Tinkercad is what I used for the text design, Fusion 360 for the stamp design)


The offset from the face of the stamp should be 2.60mm for it to be a good depth for leather stamping.


Print with the design facing up for best result use rafts and supports to hold the stamp in place while it prints. You can print the design down against the bed but if you don't have perfect first layer adhesion you will make a mess of your design.

Stamp away!
If you are not capable of creating your own STL's contact me and I will see what I can do. Tipping is always welcome for custom work ;-)
Thank you and enjoy.