Leapfrog Creatr Fan Plate and Fan Mount by z3d

Last crawled date: 3 years ago

This is a replacement part for the Leapfrog Creatr 3D printer. This is the inside plate located on the extruder carriage, just inside the fans.
There are some improvements as well. First, the duct holes are 100% open which provide better cooling for the filament before entering the extruder. Second, the mount for the electrical harness belt is higher which removes any concerns about snagged wires or filament. Third, there is an additional mount on the right side which allows one of the fans to be relocated to blow air underneath the extruder carriage.
This fan mount attaches to the Leapfrog Creatr Fan Plate, and moves one of the cooling fans outside of the extruder carriage. The fan is relocated to blow air across the bottom of the extruder carriage and the extruder heads.
The improvements make a huge difference in print quality. In addition, the Leapfrog Creatr is now able to print far more filament types.
TIP: Print this with STRONG plastic as there is some torque being applied to the plate via the electrical harness belt.
These designs can be changed on-line at the Z3D Laboratory