Lattice cube by ZachHutz

...lattice cube 2 by jcf_jackey thingiverse lattice cube 2

...hollow lattice cube by jcf_jackey thingiverse hollow lattice cube test your printer

...truncated cube lattice structure by wallydoggy thingiverse lattice cube generated with a truncated cubic pattern.

...3x3 rotated lattice cube by lermanrafi thingiverse based on angus devison's lattice cube

...ved by spikeuk thingiverse this is just another version of my previous lattice cube. this one has 2 cubes rotated on the x axis,

...9x9 lattice cube by saulquinn thingiverse a 9x9 lattice cube. print with no supports to see if your printer can handle it.

...hollow lattice cube 2 by jcf_jackey thingiverse hollow lattice cube 2 test your printer even more

...hollow lattice cube by eucguy thingiverse a lattice cube with one side missing. 5mm thick walls and holes. 108mm high

...lattice cube fixed by jcf_jackey thingiverse ok fixed one of my very first lattice cube that was off center a little

...inkercad lattice cube by t-e-c thingiverse this is a maker's muse "lattice cube" designed completely in tinkercad.

...rocket by zachhutz thingiverse rocket

...cool spinner by zachhutz thingiverse just a cool fidget spinner

...i remixed the gear vase to fit a light fixture i had laying around. theres room for the cord to fit in, just print with supports.

...fidget spinner by zachhutz thingiverse sun fidget spinner insert 608 standard skate bearings (i use a rubber mallet) fidget away

...er. it shouldn't take more than an hour to print. thanks. let me know what you think in the comments and please leave a like.

... no glue. i used a rubber mallet in order to get the bearings in. if it is too large for the bearings, size up in slicer. thanks.

...up at walmart or a hardware store. disclaimer: i do not own the caps in the picture and thus are not included in the thing files.

...aimer: these are not caps i designed, and are thus not in the files... while caps are not necessary, they make it easier to spin.

... with the other hand. then, place the spinner on a table and watch it balance with gyroscopic force. you must print with supports

...lattice jar thingiverse people seem to like containers, so here is a simple lattice jar.

...lattice sculpture by mudaseem thingiverse lattice sculpture

...micro lattice by the_lab thingiverse micro lattice

...sphere lattice by nevitdilmen thingiverse sphere lattice

...honeycomb lattice by mediated_matter thingiverse honeycomb lattice

...hex lattice bowl thingiverse hexagon lattice bowl, prints with no support

...latticed sphere by mudaseem thingiverse hollow latticed sphere. bounces quite well!

...lattice egg by ippe thingiverse a lattice easter egg created with rhinoceros3d and grasshopper.

...e aesthetic and functional. it's actually two lattices joined. the lattice is thicker on the arms to take a threaded insert.

...cube in a cube in a cube by clif thingiverse a cube inside of a cube, inside of a cube

... this is a solid cube loosely imprisoned inside a cut-away cube which in turn is loosely imprisoned inside another cut-away cube.

...d/impossible to manufacture with traditional methods. this cubes is an example of what i had in mind when buying my first printer

...cube of cubes on a cube by gannan thingiverse playing around with my cad software.

...in a cube makes impresion for a lot of people. cube from the cube will never fall out. when you print remember about the suports.

...cube in a cube by ozjohnson thingiverse this is a solid cube loosely imprisoned inside a cut-away cube.

... print does requare support material. it may be difficult to chip out unless you use a dissolving support material (which i did).

...tp://mathworld.wolfram.com/cubicnumber.html https://en.wikipedia.org/wiki/recursion https://en.wikipedia.org/wiki/matryoshka_doll

...cube in cube on pyramid by syzguru11 thingiverse cube in cube on pyramid

...cube cube 6x6x6 by syzguru11 thingiverse cube cube 6x6x6