Thingiverse
Landing Gear for SK450 Quadcopter Frame (Standard, Long, and Longer) by Lazerlord
by Thingiverse
Last crawled date: 3 years ago
Never drag your payload again!
This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the two screws that already hold in the stock landing gear.
Included are 55mm, 116mm, and 163mm landing gear heights to fit all your needs and all your printers! The 55mm ones are the smallest, and are roughly the same size as the stock landing gear. 116mm is what I use, and what I photographed. 163mm is just a bit longer, and I think this may allow room for larger gear such as a camera (DSLR?) to be mounted under the frame.
Also, as a little note, the longer legs may put more strain on your frame's arms if you come down too hard! The main frame would have move room to flex downwards in the event of a hard landing, and this could damage the main arms of the craft or even snap them off! I may design secondary gear for around the central hub later in order to fix this potential problem. The last photo is what happened when I landed hard, and it looks like the landing gear broke, which is great! I'll just print another one. Also, I had a sideways crash and the arms did break, so maybe a breakaway design would be nice so the frame could be saved at the expense of the replaceable landing gear.
Print in your favorite color! I chose red because it looks mean, and it'll make people think twice before messing with my quadcopter!
**EDIT 9/03/2016: Removed accidental hole from the bottom of the longest landing gear.
This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the two screws that already hold in the stock landing gear.
Included are 55mm, 116mm, and 163mm landing gear heights to fit all your needs and all your printers! The 55mm ones are the smallest, and are roughly the same size as the stock landing gear. 116mm is what I use, and what I photographed. 163mm is just a bit longer, and I think this may allow room for larger gear such as a camera (DSLR?) to be mounted under the frame.
Also, as a little note, the longer legs may put more strain on your frame's arms if you come down too hard! The main frame would have move room to flex downwards in the event of a hard landing, and this could damage the main arms of the craft or even snap them off! I may design secondary gear for around the central hub later in order to fix this potential problem. The last photo is what happened when I landed hard, and it looks like the landing gear broke, which is great! I'll just print another one. Also, I had a sideways crash and the arms did break, so maybe a breakaway design would be nice so the frame could be saved at the expense of the replaceable landing gear.
Print in your favorite color! I chose red because it looks mean, and it'll make people think twice before messing with my quadcopter!
**EDIT 9/03/2016: Removed accidental hole from the bottom of the longest landing gear.
Similar models
thingiverse
free
SK450 arm by xx4qxx
... longer they are out of stock worldwide.
so just download this file and print your own, or make some money by printing for others
thingiverse
free
SK450 Landing Gear by imjohsep
...or your sk450 multirotor frame. print with high infill and this model will do the trick at least up until your next hard landing.
thingiverse
free
mini quadcopter landing gear by beark54
...it would hold up and so far it has not fallen off.
mini flame wheel quadcopter frame. (http://www.thingiverse.com/thing:34552)
thingiverse
free
Landing Gear for Mini 250 FPV Quadcopter Frame by sTiNkFiZzLe
...hat both pieces of the landing gears were in a single stl file and arranged in a way they could both be printed at the same time.
thingiverse
free
SK450 alternative landing feet by zeus
...i do, you might found this useful.
i added a cable-tunnel for the motor wires.
added the scad file for custom modifications.
thingiverse
free
Hovership Longer Landing Gear by FlightFixit
...dcopter. these legs give the copter a 5 cm clearance under the copter, instead of the stock landing gear which only gives 2.5 cm.
thingiverse
free
Landing gear for sk450 quatrocopter by piitti777
...k450 quatrocopter this landing gear allow to mount camera under the quatrocopter. this part is specially compatible for hk sk450
thingiverse
free
Feet (landing gear) for the Mini Flame Wheel Style Quadcopter frame. by netmare
...main body.
the stl is a single piece. the thing are four of them in a row.
pics to come once they're finished printing.
thingiverse
free
SK450 Landing Skid 125mm by thescoobmeisterm
...sk450 landing skid 125mm by thescoobmeisterm
thingiverse
i needed longer legs for my sk450 dead cat
thingiverse
free
Cheerson CX 20 / Quanum Nova Quadcopter Moon Lander Shoes (Good For Snow) by scottflys
...uncontrolled horizontal landing. if you are new to flying, you could use these as well as the stock gear to protect your camera.
Lazerlord
thingiverse
free
Corner-Mounted Shaver Holder by Lazerlord
...trips, this holder should fit a typical electric shaver. it may fit yours, it may not, but print it (or measure it) and find out!
thingiverse
free
Clamp on Light Replacement Base by Lazerlord
...that wasn't completely shattered, and i made it look as similar to the original as possible, while maintaining functionality.
thingiverse
free
Expanded PS2 memory card holder by Lazerlord
..., copied a few pieces, and combined them all together. total length is 135mm, so you should be able to print it on most printers.
thingiverse
free
Stepper Motor Cable Saver by Lazerlord
...should keep the cables in check. they press on to the back of a stepper motor, so it's not great for high-force applications.
thingiverse
free
Eleks-Laser Mount Fix by Lazerlord
...ld just be placed in there, but i used super glue to keep mine in place so i can adjust the height without the shims falling out.
thingiverse
free
Storage holder with wider base by Lazerlord
...out as two models joined together so that the bottom piece could be filled with sand and then capped off (see video for details).
thingiverse
free
Nintendo Gamecube Logo (In 3D!) by Lazerlord
...ke that; it was just modeled by eye in autocad, so it probably isn't 100% accurate. it's definitely recognizable, though!
thingiverse
free
YouTube Play Button Award by Lazerlord
...lors mid-print makes the button pop a lot more than just printing it in one solid color.
my youtube channel: http://lazerlord.com
thingiverse
free
Samson Go Mic Shock Mount by Lazerlord
...st in case this doesn't work.
also, you'll need to add a 1/4" - 20 nut in the base in order to mount it to a tripod.
thingiverse
free
Wall-mounted Kindle Holder by Lazerlord
...r screws, but you could probably drill a hole if you really wanted to mount it with a few screws, but an adhesive should be fine.
Sk450
thingiverse
free
SK450 top plate by mastermechanic5
...sk450 top plate by mastermechanic5
thingiverse
top plate for the hobbyking sk450.
thingiverse
free
Prop guard sk450 by Droneproject
...prop guard sk450 by droneproject
thingiverse
prop guard made for sk450. parts of the opendrone project.
thingiverse
free
SK450 arm by xx4qxx
... longer they are out of stock worldwide.
so just download this file and print your own, or make some money by printing for others
thingiverse
free
SK450 GoPro holding device by paddex
...sk450 gopro holding device by paddex
thingiverse
gopro holding device for sk450 quad
thingiverse
free
Landing gear for sk450 quatrocopter by piitti777
...k450 quatrocopter this landing gear allow to mount camera under the quatrocopter. this part is specially compatible for hk sk450
thingiverse
free
SK450 Landing Skid 125mm by thescoobmeisterm
...sk450 landing skid 125mm by thescoobmeisterm
thingiverse
i needed longer legs for my sk450 dead cat
thingiverse
free
Hobbyking SK450 higher landing gear by DaWoJnA
...wojna
thingiverse
100mm high landing gear for hobbykings quadrocopter sk450.
also fits for the dead cat conversion of the sk450.
thingiverse
free
SK450 cmos holder, cmos 600tvl by paddex
...sk450 cmos holder, cmos 600tvl by paddex
thingiverse
cmos 600 tvl cam holder for sk450 quad
thingiverse
free
SK450 Landing Gear by imjohsep
...or your sk450 multirotor frame. print with high infill and this model will do the trick at least up until your next hard landing.
thingiverse
free
SK450 Gopro Mount by zpj
...it only needs a few nuts and bolts to mount, and can fit any gopro. prints easily with no support or raft, and fits on perfectly.
Quadcopter
thingiverse
free
Quadcopter by MRCOOLKIDBADGER
...quadcopter by mrcoolkidbadger
thingiverse
quadcopter
thingiverse
free
quadcopter by vladac
...quadcopter by vladac
thingiverse
custom drone parts for a quadcopter
thingiverse
free
Quadcopter by TheMadScientist
...quadcopter by themadscientist
thingiverse
a quadcopter made out of a piece of wood for the fusilage...
parts to follow
thingiverse
free
quadcopter 2 by papo2110
...quadcopter 2 by papo2110
thingiverse
quadcopter
thingiverse
free
quadcopter 1 by papo2110
...quadcopter 1 by papo2110
thingiverse
quadcopter
thingiverse
free
quadcopter 4 by papo2110
...quadcopter 4 by papo2110
thingiverse
quadcopter
thingiverse
free
quadcopter 5 by papo2110
...quadcopter 5 by papo2110
thingiverse
quadcopter
thingiverse
free
quadcopter 9 by papo2110
...quadcopter 9 by papo2110
thingiverse
quadcopter
thingiverse
free
AT Quadcopter by aoxilus
...at quadcopter by aoxilus
thingiverse
utep atb quadcopter parts
credits:
ramon cardona and his team
at students
thingiverse
free
Quadcopter trophy by pvplus
...quadcopter trophy by pvplus
thingiverse
quadcopter trophy
Landing
thingiverse
free
Joana land by
...joana land by
thingiverse
its joana land
thingiverse
free
landing gear
...landing gear
thingiverse
landing gear for rc plane
thingiverse
free
QAV250 landing by chiborz
...qav250 landing by chiborz
thingiverse
qav250 landing.
prints and lands!!!
thingiverse
free
Landing Pad
...landing pad
thingiverse
landing pad/skid for most 5-7 inch quadcopters.
thingiverse
free
land by kassidynowak
...land by kassidynowak
thingiverse
thingiverse
free
land by kassidynowak
...land by kassidynowak
thingiverse
thingiverse
free
Multirotor Landing Gear by
...multirotor landing gear by
thingiverse
this landing gear is modeled after the simple delrin landing gear from flitetest.
thingiverse
free
Land Station (80 lands for each color) by Zelkior
...se
it's a one block land station for the limited formats in small group.
for each color, you may put approximately 80 lands.
thingiverse
free
landing gear by Pifle
...landing gear by pifle
thingiverse
currently lege and solid landing
thingiverse
free
Toothpick FPV Landing skids/Landing foots by jimmm77
...toothpick fpv landing skids/landing foots by jimmm77
thingiverse
tpu print
Gear
thingiverse
free
Gears Gears Gears to Duplo adapter by gpvillamil
...apter by gpvillamil
thingiverse
this little piece helps adapt the learning resources gears gears gears toy to lego duplo bricks.
thingiverse
free
Gear
...gear
thingiverse
gear
thingiverse
free
Gear
...gear
thingiverse
this is a gear!!!
thingiverse
free
gear
...gear
thingiverse
gear
thingiverse
free
Gear gears by whosawhatsis
...ic sphere gears script and its predecessors, and made a gear to cut the other gears out of. i basically mashed it up with itself.
thingiverse
free
Gear and gear rail by ozukaru
...gear and gear rail by ozukaru
thingiverse
this is a gear with his gear rail box
thingiverse
free
Gear reducer gear by krism4a1
...gear reducer gear by krism4a1
thingiverse
a copy of the destroyed gear reduction gear.
thingiverse
free
gear worm gear by carlosfernandez
...gear worm gear by carlosfernandez
thingiverse
worm gear
thingiverse
free
Gear, Dual Gear by Wekker
...gear, dual gear by wekker
thingiverse
this is a dual gear with 25 tooth below and 10 on top
thingiverse
free
Gear for Mangle
...gear for mangle
thingiverse
replacement gear for broken gear in a mangle. generated with a gear plugin in fusion360.
Longer
thingiverse
free
Longer legs
...longer legs
thingiverse
slightly longer legs
thingiverse
free
Made clamps longer 25mm longer by CC7
...lamps longer 25mm longer by cc7
thingiverse
remixed 3 parts from: http://www.thingiverse.com/thing:2194278
make them 25mm longer
thingiverse
free
80mmfan-80mmtube (longer)
...80mmfan-80mmtube (longer)
thingiverse
longer 80mm aluminium tube part.
thingiverse
free
Longer filamentguide and longer support clip by 3DnoobSWE
...port clip by 3dnoobswe
thingiverse
this is a remake on screwless filament guide - ender 3 (pro, v2) by "theviraldiy"
thingiverse
free
Longer waterproof stash cases
...longer waterproof stash cases
thingiverse
needed them to be longer to store longer stuff. these things are awesome!!
thingiverse
free
Kaabo Mantis fender longer
...kaabo mantis fender longer
thingiverse
a longer fender
thingiverse
free
longer sj4000 handle by ralfselfjord
...longer sj4000 handle by ralfselfjord
thingiverse
this is a longer handle.
thingiverse
free
A Longer bolt by Jjmboni
...a longer bolt by jjmboni
thingiverse
i wanted a longer bolt so i could hold two filament spools above the printer.
thingiverse
free
Longer mount by Youri3d
...longer mount by youri3d
thingiverse
thingiverse
free
Aerator Longer by digiTALker
...aerator longer by digitalker
thingiverse
+
Long
thingiverse
free
Pumpkin Long
...pumpkin long
thingiverse
long long pumpkin
thingiverse
free
Long support
...long support
thingiverse
long support 200mm long
thingiverse
free
Spring long
...spring long
thingiverse
spring long
thingiverse
free
Corner Long for GoPro
...rse
corner long for gopro mount
there are two versions:
long solid corner [corner_long]
long angle lightened [corner_long_light]
thingiverse
free
long plate by Syzguru11
...long plate by syzguru11
thingiverse
long plate
thingiverse
free
long teeth by Syzguru11
...long teeth by syzguru11
thingiverse
long teeth
thingiverse
free
the long shaddow of catman
...the long shaddow of catman
thingiverse
the long shaddow of catman
thingiverse
free
Long Sleeve by Sanj997
...long sleeve by sanj997
thingiverse
long sleeve for quadcopter.
thingiverse
free
long sword by 5555fives5
...long sword by 5555fives5
thingiverse
this is a 32 inch long sword
thingiverse
free
Long Tweezers by david4974
...long tweezers by david4974
thingiverse
long tweezers (about 160mm)
Standard
thingiverse
free
Jug Standard by johnkh
...jug standard by johnkh
thingiverse
jug standard
thingiverse
free
Standard Dice by UAlbanyInformatics
...standard dice by ualbanyinformatics
thingiverse
standard dice
thingiverse
free
Standard cuvette by Dr_MCeeP
...standard cuvette by dr_mceep
thingiverse
a model of a standard cuvette.
thingiverse
free
Marauder IIC (Standard)
...marauder iic (standard)
thingiverse
marauder iic (standard)
thingiverse
free
Standard Vase by mikeyy97
...standard vase by mikeyy97
thingiverse
standard vase to test 0,6mm layer heights
thingiverse
free
The Standard Model by henryhollis4
... model by henryhollis4
thingiverse
based on the standard model of particle physics:
https://en.wikipedia.org/wiki/standard_model
thingiverse
free
Standard bowl by skrivarekonto
...standard bowl by skrivarekonto
thingiverse
standard bowl. work with abs , pla and lots of other filaments.
(not tested)
thingiverse
free
MAS Standard column
...mas standard column
thingiverse
modern architectural stone ltd standard column 1/10 scale
thingiverse
free
The Standard Doohicky by Graysmith75
...dard doohicky by graysmith75
thingiverse
a standard fan with 10 degree angle of attack - smooth and hopefully frictionless(ish)
thingiverse
free
FlyPurrz Purrz.75 Motorspant standard / motor mount standard by FlyPurrz
...dard / motor mount standard by flypurrz
thingiverse
motorspant standard für den purrz.75 / motor mount standard for the purrz.75
Frame
thingiverse
free
Sunglasses Frame
...sunglasses frame
thingiverse
sunglasses frame for broken frames.
thingiverse
free
Frame by reulew
...frame by reulew
thingiverse
frame
thingiverse
free
frame by mmireles
...frame by mmireles
thingiverse
frame
thingiverse
free
formwork frames
...formwork frames
thingiverse
model frame
thingiverse
free
Frame Stand for 15x10 picture frame by sorteds
...frame stand for 15x10 picture frame by sorteds
thingiverse
just an easy frame stand for a 15x10 picture frame
thingiverse
free
Frame Depot Picture Frame Hook by madpilot
...ws the picture frame to sit perfectly flush with the wall.
requires 2 x 1.2mm diameter bullet head nail to insert in to the wall.
thingiverse
free
Frame by Portalsg
...frame by portalsg
thingiverse
to create the bicycle frame of carbon fiber
thingiverse
free
frame for a plane
...frame for a plane
thingiverse
frame form a 1920s stile race plane
thingiverse
free
Framed D12
...framed d12
thingiverse
a d12 modeled by a sphere encased in a dodecahedron frame.
thingiverse
free
Picture frame
...picture frame
thingiverse
a fun picture frame for a 4 by 6 inch photo