Land Rover Chassis by zxcvbn

Last crawled date: 3 years, 1 month ago

Chassis for the Austar 1/10 D90. Mine came from Banggood.
Uses the running gear from tahustvedt's monster truck https://www.thingiverse.com/thing:2299884
Still needs the front/rear frames and battery mount.
Have included my cv joints, axles and side gears for the diffs. You will need the rest of the diff parts and center gearbox from Tahustvedt's Monster Truck. I have made CV joint drive shafts to go from the gearbox to the diffs, they are on here in my stuff but the ball ends probley need updating to the v3 ones that are here.
5/12/17
Did this ages ago but haven't had proper internet or PC to upload anything.
Added a battery mount to the frame, made it to fit the 2s 4000mah lipos I made from a turnigy 4s I had, there is still room to make it fit bigger batterys if needed.
21/01/18
added 0.2 smaller axles so they fit easier.
Started making body mounts, should be finished soon
Added diff-locks that are the same style as the diff side gears
22/01/18
new chassis ends with f/r bumper and body mounts.
Will probably have a clean out of old files soon
23/01/18
Pretty much finished
Added Burgerpocket's Bull bar and Winch bumper https://www.thingiverse.com/thing:860200 modded to fit.
Probably find or make a back bumper soon
Add some pic's of how to chop the back of the floor pan.
Back a-arm just hits the battery, might move the a-arm pivot the same as the front one.
24/01/18
Rear bumper added
Front bumper made a bit taller
towball/bar added
clipon back mount added (might be to hard to get body on with the one with holes)
20/02/18
New frame v5 and ends.
Simpler and can fit a larger battery, rear top arm lowered to miss battery and top shock mount holes removed for body clearance, body sits closer to the frame now.
21/02/18
Made the holes in the v5 frame ends smaller.
24/02/18
Added bigger guard flairs.
5/09/18
Added magnet body mounts.Much quieter than the clip on ones.
5/20/18
New flairs.
https://youtu.be/F0AD1Hq00Jchttps://youtu.be/_UVN3tL8xQM