Thingiverse
La Pavoni portafilter stand for Niche Zero
by Thingiverse
Last crawled date: 4 years, 3 months ago
With saucer :) Less coffee dust around (compared to other existing solutions).
Well balanced, holds very firmly and at the same time the portafilter easily slides in and out.
Designed for La Pavoni Post-Mil portafilters, both bottomless and standard with spout unscrewed.
Design itself is inspired by the DE PF stand.
The stand repeats the shape of a standard plate and has a hook on the bottom for mounting which also allows rotation.
If you want to modify, find 'hoho - nz' at onshape.com.
Soon I hope I will make an attempt to adapt this for 58mm PFs and will print using a wooden PLA. Will see how it goes ;)
Well balanced, holds very firmly and at the same time the portafilter easily slides in and out.
Designed for La Pavoni Post-Mil portafilters, both bottomless and standard with spout unscrewed.
Design itself is inspired by the DE PF stand.
The stand repeats the shape of a standard plate and has a hook on the bottom for mounting which also allows rotation.
If you want to modify, find 'hoho - nz' at onshape.com.
Soon I hope I will make an attempt to adapt this for 58mm PFs and will print using a wooden PLA. Will see how it goes ;)
Similar models
thingiverse
free
Portafilter holder (51mm botomless) for La Pavoni by ssh16
...ut or botomless.
groove on the edje helps to catch coffee grinds.
standard version also available - la pavoni pf-spout holder.stl
thingiverse
free
Portafilter Holder for La Pavoni Pub and Bar models by ChatToBrian
...filters.
the holder is tested and stable and can be mounted to the side of the la pavoni machines using strong double sided tape.
thingiverse
free
La Pavoni tamping base by ccc
...se
dedicated to the post millenium la pavoni portafilters.
also works perfectly with the rok portafilter.
60mm inner diameter.
thingiverse
free
La Pavoni 51mm tamp stand by rk27
...here's no overweight when the portafilter is set.
wall thickness is 6mm on the top. bottom is just 4mm.
came out very strong.
thingiverse
free
La Pavoni Europiccola portafilter funnel by Luxinator10
...resso funnel for la pavoni europiccola portafilter 51mm
is used to save coffee while grinding
no ground coffee at your countertop
thingiverse
free
Espresso Distribution by JoeyDee9
...popular distribution device and should also work for professional sized portafilters although i have not tested those tolerances.
thingiverse
free
La Pavoni portafilter declumping ring by cain666
...nd my easy clean spout http://www.thingiverse.com/thing:101392 )
not only that it works as a portafilter hanger on the grinder
thingiverse
free
Niche Zero dosing cup holder for Decent Espresso portafilter stand by horaceko
...ymore. i wanted to still be able to put my dosing cup on the niche, so i designed a replacement that sits on top of the pf stand.
thingiverse
free
Tamper for La Pavoni grinder sized for 49mm portafilter by ZombieCat
...uilding a replacement... works great!
this thing was made with tinkercad. edit it online https://tinkercad.com/things/ka3uqctw77i
thingiverse
free
Nesting ergo tamping stand for Pavoni & other 48mm portafilters by cgfan
...rtafilters used in my pavonis and la cara, and should also work for an olympia cremina, though i did not test against the latter.
Pavoni
thingiverse
free
Schraube Schauglas La Pavoni by Starker
...schraube schauglas la pavoni by starker
thingiverse
la pavoni
thingiverse
free
La Pavoni Schraube Wasserglas by Starker
...la pavoni schraube wasserglas by starker
thingiverse
la pavoni schraube wasserstandsglas
thingiverse
free
La Pavoni tamper station
...la pavoni tamper station
thingiverse
enjoy
thingiverse
free
La Pavoni Funnel by sharkybilly
...lised it from scratch with sketchup (.skp added)
infill 10% in enough
work fine for la pavoni filter with inner diameter of ~50mm
thingiverse
free
La Pavoni Steam Valve Lever by ssh16
...la pavoni steam valve lever by ssh16
thingiverse
this is replacement for la pavoni steam valve knob
thingiverse
free
La Pavoni tamping base by ccc
...se
dedicated to the post millenium la pavoni portafilters.
also works perfectly with the rok portafilter.
60mm inner diameter.
thingiverse
free
La Pavoni Grouphead-Sleeve Removal Tool
...a pavoni grouphead-sleeve removal tool
thingiverse
la pavoni grouphead-sleeve removal tool.
you can turn it with a 19 mm wrench.
thingiverse
free
La Pavoni Europiccola portafilter funnel by Luxinator10
...resso funnel for la pavoni europiccola portafilter 51mm
is used to save coffee while grinding
no ground coffee at your countertop
thingiverse
free
La Pavoni 1st gen lower tray by ssh16
...er tray by ssh16
thingiverse
this is lower tray for older (1st generation) la pavoni espresso machines, which don't have it.
thingiverse
free
Portafilter Holder for La Pavoni Pub and Bar models by ChatToBrian
...filters.
the holder is tested and stable and can be mounted to the side of the la pavoni machines using strong double sided tape.
Niche
thingiverse
free
Niche Zero NFC Disc
...ero nfc disc
thingiverse
modeled my own niche zero nfc disc.
-12mm wide slot
-self centering
works quite well compared to no nfc
thingiverse
free
Niche Zero Coffee Grinder Leg by Theonewhoisodd
...niche zero coffee grinder leg by theonewhoisodd
thingiverse
this is a 3d modelled leg for the niche zero coffee grinder.
thingiverse
free
Niche Zero Coffee Grinder Cup Holder by Theonewhoisodd
...niche zero coffee grinder cup holder by theonewhoisodd
thingiverse
this is the cup holder for the niche zero coffee grinder.
thingiverse
free
Niche Zero cover NFC disk
...ng and normalize the coffee bean supply to the burrs.
30/11/2019: added version with smaller opening.https://youtu.be/8bk2kefybus
thingiverse
free
Niche Zero Dalla Corte Can insert by mogul19
...19
thingiverse
this is a adapter for the niche zero can to adopt the 58mm can to the dalla corte portafilter.
print upside down
thingiverse
free
Niche Zero Portafilter Holder
...e room to make sliding in and out easy. channel in the mounting hole allows for adjusting position relative to the grinder chute.
thingiverse
free
Niche Zero Hopper Cover
...use i just think the cap rotating is annoying.
i may add an easier way to pick up the cap if anyone is interested in this design.
thingiverse
free
LED light gutter for shower niche by darkhorse_rising
... but can easily be modified to whatever spec you need.
i recommend petg or abs over pla as they tolerate wet environments better.
thingiverse
free
Niche Zero portafilter holder v1
...niche zero portafilter holder v1
thingiverse
after this print i found it's not that easy to clean around.
check v2.
thingiverse
free
Niche Zero dosing cup holder for Decent Espresso portafilter stand by horaceko
...ymore. i wanted to still be able to put my dosing cup on the niche, so i designed a replacement that sits on top of the pf stand.
Portafilter
thingiverse
free
Delonghi portafilter holder
...ith other but no idea.
designed to hold my naked / bottomless / unpressurized portafilter, but fits the stock one as well !
enjoy
thingiverse
free
Portafilter Holder by mkke
...r by mkke
thingiverse
holder for a 58mm portafilter.
there are no mounting holes, it is meant for gluing to tiles with silicone.
thingiverse
free
Funnel for 58mm Portafilter by yohannaftali
...funnel for 58mm portafilter by yohannaftali
thingiverse
funnel for 58mm portafilter
thingiverse
free
Portafilter Wallmount BZ10 by rd_subwoofer
...portafilter wallmount bz10 by rd_subwoofer
thingiverse
wallmount for portafilter for a bz10
thingiverse
free
58mm portafilter wall mount
...ape.
it's degined for sage bes 920 (or breville dual boiler) portafilter, but should work with any standard 58mm portafilter.
thingiverse
free
E61 Locking Portafilter Holder - For Angled ECM Portafilter by rirymate
...r and didn't find any so i made my own. please note that this is currently in the prototyping stage and changes may be made.
thingiverse
free
53mm Portafilter funnel by jabberwoku
... the funnel catches all the grind and won't get all over your table. it is also great for "tapping" redistribution.
thingiverse
free
Coffee Funnel for Portafilter 58mm by yohannaftali
...coffee funnel for portafilter 58mm by yohannaftali
thingiverse
funnel for portafilter 58mm
thingiverse
free
Distribution Tool for Portafilter 58mm by yohannaftali
...distribution tool for portafilter 58mm by yohannaftali
thingiverse
distribution tool for portafilter 58mm
thingiverse
free
Rancilio bottomless portafilter tamping stand by jimhigson
...o portafilters, for machines such as the silvia.
only for bottomless portafilters, but could be remixed for spout-ed filters too.
Zero
thingiverse
free
Zero by smight
...zero by smight
thingiverse
zero
thingiverse
free
zero
...zero
thingiverse
and another beyblade part
thingiverse
free
RackPI - Raspberry Pi zero/zero W
...ckpi - raspberry pi zero/zero w
thingiverse
rack support for raspberry pi zero / zero w and oled screen 28x32 0.91 "ssd1306
thingiverse
free
sub zero by SavageWarlord
...sub zero by savagewarlord
thingiverse
sub zero
by sub zero 314http://www.123dapp.com/creature/sub-zero/5829557
thingiverse
free
case for "raspberry pi zero/zero w" with "Camera Module for Raspberry Pi Zero" by atsushi_kbt
...ducts/raspberry-pi-zero-w
camera module for raspberry pi zero
https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module
thingiverse
free
Rasberry Pi zero / Zero W/ Pi Zero WH case by CoreDesign
...designed this case for the rasberry pi zero wh. pretty minimalistic. you can fit it by snapping the top part onto the bottom part
thingiverse
free
Zero Two stencil
...zero two stencil
thingiverse
zero two stencil
thingiverse
free
Zero Cam mount
...zero cam mount
thingiverse
zero cam mount
thingiverse
free
Zero helmet by mansonkibe
...zero helmet by mansonkibe
thingiverse
zero helmet. printed with supports.
thingiverse
free
ZERO KEYRING by shire
...zero keyring by shire
thingiverse
zero bike logo, think these are electric bikes
Stand
thingiverse
free
Stand-stand by Fank86
... all your troubles go away, .1mm at a time!
and no, i did not make this in 15 seconds to poke fun at all the stands on this site.
thingiverse
free
stand
...stand
thingiverse
a stand
thingiverse
free
A stand
...a stand
thingiverse
a stand.
thingiverse
free
Stand
...stand
thingiverse
this is a stand, nothing more !
thingiverse
free
stand
...stand
thingiverse
this is a stand that you can put things on
thingiverse
free
Headset stand with phone stand
...dset stand that doubles as a phone stand, the phone also can be charged while on the stand.
leave a comment if you have feedback
thingiverse
free
hairdryer stand and Curling iron stand
...hairdryer stand and curling iron stand
thingiverse
hairdryer stand and curling iron stand
thingiverse
free
Inbus Stand / Inbuskey Stand
...workshop.
this inbuskeys fitts perfectly in that stand:
8 ; 6 ; 5 ; 4 ; 3 ; 2,5 ; 2
enjoy your print :)
comment below if it works
thingiverse
free
Stand by cmaines
...stand by cmaines
thingiverse
stand
thingiverse
free
stand by Syzguru11
...stand by syzguru11
thingiverse
stand