Kossel Mini Magnetic Rod Jig 180mm Layout by Inhibit

Last crawled date: 3 years, 1 month ago

04/18/2017: Added a M4 spacer that was necessary for the spacing that the jigs use for the rods. While the rod worked fine and the jig is awesome there's a space for a stand-off that wasn't part of my threaded ball bearing ends. This will take it's place and is sized to allow it to be force threaded on an M4 stand-off.
Without really thinking about the (rather obvious in hindsight) 190mm aspect of Laurman's Kossel Mini Magnetic Arm jig I went ahead, printed and assembled it. And it works!
Except for the small over site on my part that I'm using 180mm spec arms for the Kossel Mini. So rather than complain or eyeball the size I went and created a new pattern for the excellent jig found here: http://www.thingiverse.com/thing:1814477
So if you, too, would like to use these very nice jigs with a 180mm layout template for your new magentic Kossel arms you can now click, download and (hopefully dimensionaly accurately) print from this PDF.