Kossel Hexagon hotend by kert

Last crawled date: 2 years, 12 months ago

This cheap but great hotend diserved it's own effector, As it is quite close to the E3D in design, I borrowed this effector and remixed it in order to fit the hexagon.
Changes are :
Length adjustment as the hexagon is shorter
The hole in which the cold-end fits is perfect, but the one in the continuity was too short, so I made it deeper.
The clamps were a bit too thick to fit where it is supposed to. Guess the design is a bit different than the E3D in the end.
To use it you'll need two (or just one for the cold-end) 30mm fan (x10mm or x20mm).
You still have the possibility to use (like the original) magnets to attach a removable Z probe (I love it!) with 4 6x10mm cylindrical magnets. Like this : https://www.youtube.com/watch?v=4D3dZ5rjmNg
EDIT: I updated the effector .STL, since as pointed out by AxisLab, the fan would have hit the print bed. I don't have received yet my 30mm fans so I couldn't test it, but it should be fine now!