Thingiverse
Kossel EZStruder mount by Linor
by Thingiverse
Last crawled date: 2 years, 12 months ago
Bracket to mount an EZStruder (and stepper) to an OpenBeam extrusion at a 45 degree angle. The spacer is optional, depending on whether or not you need additional clearance for wheeled carriages.
Print the bracket at with high infill due to the weight of the stepper motor.
Note: The supplied STL is rendered for a large nema17 stepper (47mm), if your stepper is smaller, you will need to render your own version using the supplied OpenSCAD files (see instructions)
Print the bracket at with high infill due to the weight of the stepper motor.
Note: The supplied STL is rendered for a large nema17 stepper (47mm), if your stepper is smaller, you will need to render your own version using the supplied OpenSCAD files (see instructions)
Similar models
thingiverse
free
EZStruder Mount for BI V2.5 by clefranc
... install an optional fan shroud if your stepper get hot.
the new extruder cold end remain at the same location as the original.
thingiverse
free
EZstruder Mounting Adapter by crkochan
... printer. the stepper itself is attached only to the ezstruder, so i also added a tab/shelf to support the bottom of the stepper.
thingiverse
free
Planetary EZStruder Mount (geared stepper to EZStruder) by 626Pilot
...e the right screws to use with his, it's basically the same thing, so pick whichever one matches the screws you have on hand.
thingiverse
free
3uP Fan Bracket (EZStruder) by darkgrue
...p fan bracket to adapt it to the direct mount seemecnc ezstruder.
requires the original fan duct fan_bracket_b.stl to complete.
thingiverse
free
Anet A8 Mounting Bracket for a MeanWell NES-350-12 Power Supply by mskressin
...bracket to the power supply. then you can simply put the m3 screws through the existing holes in the frame to attach the bracket.
thingiverse
free
Nema 17 Brackets for Drag chain blank by SQLException
...ema 17 brackets for drag chain blank by sqlexception
thingiverse
a blank bracket so you can just mount anything to your stepper.
thingiverse
free
Parametric Stepper Bracket by spiffcow
... can choose how far away from the extrusion you want to mount your stepper motor so that it's flush with the leadscrew mount.
thingiverse
free
Zesty Sidewinder stepper bracket mount 90 degrees
...ees bracket for mounting the stepper bracket for the zesty sidewinder on the original stepper mount on printers like the ender 3.
thingiverse
free
Hadron power supply mounting brackets by Preso
... long (approx.) and 114.35 wide by 48.6 deep. the igs file is included if you need to tweak the design to suit your power supply.
thingiverse
free
3D Printer Power Supply Bracket (MeanWell) by henryarnold
...our power supply to a surface. the brackets also provide about a 6 mm spacing so that your power supply will have better cooling.
Linor
thingiverse
free
Grill Knob by linorics
...grill knob by linorics
thingiverse
simple grill knob, not sure what model grill this is for.
thingiverse
free
Prusa i3 rework bowden mount E3D-v6 by Linor
...rework bowden mount e3d-v6 by linor
thingiverse
bowden mount for the prusa i3 rework, including two fans for the e3d-v6 hotend.
thingiverse
free
Prusa i3 ReWork / Improved - Adjustable Z Endstop by Linor
...9) and the mechanical end stops from reprapworld.com. scad files for the end stop holder are included for modification if needed.
thingiverse
free
Half Bridge Load Sensor holder by linorics
...com/products/13878
i am also using a load cell amplifier (amazon/ebay has hx711 chips too)https://www.sparkfun.com/products/13879
thingiverse
free
Heart KeyChain (Hebrew) by spawn7il
...spawn7il thingiverse some heart keychains for a present or, linor liat, mor, orly, chen and...
Ezstruder
thingiverse
free
EZStruder direct mount by HadesCorps
...irect mounting adapter for ezstruder with 40x40 fan mount. reused screws from the original bi mount and some of ezstruder screws.
thingiverse
free
EZstruder adapter for Printrbot+ by DonaldJ
...75 mm filament. with slight modification, the ezstruder can use the ubis hot end. no modification to the printrbot is required.
thingiverse
free
Planetary EZStruder Mount (geared stepper to EZStruder) by 626Pilot
...e the right screws to use with his, it's basically the same thing, so pick whichever one matches the screws you have on hand.
thingiverse
free
EZstruder Mounting Adapter by crkochan
... printer. the stepper itself is attached only to the ezstruder, so i also added a tab/shelf to support the bottom of the stepper.
thingiverse
free
EZStruder Mount for Prusa Mendel by nabilahmad
...in place very easily and locks in with a short piece of filament inserted in the end. uses hardware the comes with the ezstruder.
thingiverse
free
Hawkins Graber-i3 Ezstruder Mount by beardface
...hawkins graber-i3 ezstruder mount by beardface
thingiverse
graber i3 ezstruder mount with attachment for 50mm fan.
thingiverse
free
EZSTRUDER Special Rostock / Delta / Orion by le_tropezien
...ezstruder special rostock / delta / orion by le_tropezien
thingiverse
ezstruder special rostock / delta / orion
same seemecnc
thingiverse
free
EZStruder Replacement Cover by Minstrel
... the original cracked in two due to a very weak spot in the brittle plastic. this design has a bit of reinforcement in that spot.
thingiverse
free
SeeMeCNC EZstruder cooler by Disconnector
...r on my seemecnc rostock max was running very hot (like burn my hand hot!) so i designed a dual 40mm fan mount. all cool now :-)
thingiverse
free
EZStruder Mount for the Prusa i3 by sgraber
... with 30mm hole spacing for the extruder mount. print and enjoy!
[1] http://shop.seemecnc.com/ezstruder-cold-end-kit-70780.htm
Kossel
thingiverse
free
kossel bottom by keisukelin
...kossel bottom by keisukelin
thingiverse
kossel bottom
thingiverse
free
Leg for kossel by exelon
...leg for kossel by exelon
thingiverse
leg for kossel
thingiverse
free
Extruder for kossel by spencer_chen7
...extruder for kossel by spencer_chen7
thingiverse
extruder for kossel
thingiverse
free
Kossel parts by breezer83
...kossel parts by breezer83
thingiverse
kossel parts
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
Kossel Medium by flux83
...kossel medium by flux83
thingiverse
vertex for upgraded kossel mini
thingiverse
free
Kossel Mini by salesmendesandre
...kossel mini by salesmendesandre
thingiverse
custom kossel mini
frame 20x20
thingiverse
free
leg for kossel by ionulet
...leg for kossel by ionulet
thingiverse
leg for kossel with channel for end- stop cables
thingiverse
free
Optical Endstops Mounts for Kossel (with Better Kossel carriages) by dellfer
...stops on the anycubic kossel with better kossel carriages by codefreak https://www.thingiverse.com/thing:2501337
more precission
thingiverse
free
kossel??????? by wangrui19890704
...kossel??????? by wangrui19890704
thingiverse
??2020?2060???
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount