Korg Volca Twin Track Mount by JoyMonkey

Last crawled date: 3 years ago

I'm a little low on surface space, so wanted to mount my 3 Volca's above the shelf I currently have my Korg Monologue synth on. It's standard Rubbermaid "Twin Track" shelving, the kind of stuff that's used commonly in closets.
I designed and 3D printed a pair of brackets, fastened a couple of pieces of oak to them, hooked them onto my existing track and presto - I've got the Volca's nicely accessible right above the Monologue and at a user friendly 18 degree angle! I printed the brackets using PETG material, so they're good and sturdy, though I'm sure PLA or ABS would be fine too.
Here are the two piece of wood I used. I counter-sunk mounting holes and used 6-32 1/2" flat-head screws.
1/4 x 3.5" oak board : https://www.homedepot.com/p/207058962
1x1 oak outside corner molding : https://www.homedepot.com/p/206013401