Thingiverse
Kitchen Cabinet Shelf Support Retainer (Pin) by FearLesOne
by Thingiverse
Last crawled date: 3 years, 4 months ago
A cabinet shelf support to replace a broken one for my kitchen cabinet. I tried and failed to find a suitable replacement at my local hardware store.
This design is modeled after the original plastic part manufactured by Titus. The pin is 5mm diameter and the supported shelf thickness is 19mm to 19.5mm.
I printed this using PETG filament for strength using 0.4mm nozzle and 0.12 layer height on and Ender 3. PLA would not be recommended because it's too brittle. Also sliced using Cura; I tilted the model to allow for maximum strength between the pin and support -- i.e. these parts are printed in the same layer as much as possible -- using 100% infill, with Tree support, and Raft for bed adhesion.
This design is modeled after the original plastic part manufactured by Titus. The pin is 5mm diameter and the supported shelf thickness is 19mm to 19.5mm.
I printed this using PETG filament for strength using 0.4mm nozzle and 0.12 layer height on and Ender 3. PLA would not be recommended because it's too brittle. Also sliced using Cura; I tilted the model to allow for maximum strength between the pin and support -- i.e. these parts are printed in the same layer as much as possible -- using 100% infill, with Tree support, and Raft for bed adhesion.
Similar models
thingiverse
free
Cabinet Shelf Support Clip
...his simple design did the trick. printed with basic settings. used support for the pin as it is not flush with the build surface.
thingiverse
free
Kitchen Unit Shelf Support (metric) by p_r_i_m_e
...giverse
6mm pin and 10mm x10mm supports
replacement for shelf supports in kitchen cupboards etc
needs support, print pin upwards
thingiverse
free
IKEA shelf PIN support by supernetuser
... holder. use support. or petter print on the side, so weight of the shelf can't delaminate layers. slightly higher temp helps
thingiverse
free
Cabinet Shelf Support by TheRealRyanFox
...the store
the pin is a touch larger than 5 mm, the original pin was 5mm but i decided it needed to be a bit larger to fit nicely.
thingiverse
free
Yet another car exterior pin (cutomizable) by dspirov
...3-piece design can be printed without supports, and the layers are aligned in the best way for strength, so even cheap pla works.
thingiverse
free
Fabia Parcel Shelf Hinge by StanSPP
...cleaned it up a before fitting. you could try printing it standing up but i think it might be weaker and snap across the layers.
thingiverse
free
Shelf Pin - Kitchen Furniture (Mr.Bricolage) by clemsept
...by clemsept
thingiverse
i designed this piece to replace missing pin on my kitchen furniture's kit (bought at mr.bricolage).
thingiverse
free
Shelf holder by cfmccormick
...s. needs to be printed with supports. was very strong once i got the peg diameter right for my cabinets - yours may be different!
thingiverse
free
Kitchen Carcass Shelf Support Pin by bobblejot
...b
bobblejot twitter
just one of the small pins that you normally use 4 off to support a shelf in most standard kitchen carcasses.
thingiverse
free
command strip mini shelf by JusticeDude
...and also changed the orientation so that it prints much faster and has more strength.
i use them to hold my monster high dolls.
Fearlesone
thingiverse
free
Cable Retainer - Wall Mount by FearLesOne
...all-side down would be a mistake as hooks would be much weaker due to inherent laminate weakness between layers along the z axis.
thingiverse
free
Outdoor Wall Lantern Light Sensor Cap by FearLesOne
...int with support. my first print came up perfect and fit so snug that no glue or adhesive is necessary; the cap just snapped-on.
thingiverse
free
Customizable Broom Latch Revised by FearLesOne
...ng holes and extra 2mm mount wall thickness.
for hinges, i used three 4d finishing nails -- shortened to the height of the latch.
Retainer
turbosquid
$5
retaining wall
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
![Retain [traffic signal]](/t/13301455.jpg)
Retain [traffic signal]
...yalty free 3d model retain [traffic sing] for download as max on turbosquid: 3d models for games, architecture, videos. (1196616)
turbosquid
$41
Pins, Clips & Retainers Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Fine tuning retaining mechanism
...anism for download as 3ds, max, ige, obj, fbx, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1254220)
turbosquid
$6
Alfa Romeo 166 sill spoiler retainer clip left side
... 166 sill spoiler retainer clip left side for download as ipt on turbosquid: 3d models for games, architecture, videos. (1301046)
3ddd
$1
Sanderson Pillows Oakwood
... that has been beautifully translated in five colourways to retain the characteristic textures and flecks of the original prints.
3ddd
$1
ocean rocker by jolyon Yates
...cker by jolyon yates
3dsmax , vray obj file included
the mesh retains all the original uvs, allowing for fast material creation.
3ddd
$1
Armchair Fensy by NUBE
...l metal frame covered by shape retaining polyurethane foam. black oven painted or black nichel painted feet.
not removable cover.
3d_ocean
$16
Sony Ericsson Xperia S
...y textures, bump maps, opacity maps. custom screen texture, low poly retained so smoothness can be adjusted according to demands.
3ddd
$1
GLASS BARN FILAMENT SCONCE AGED STEEL
...s retain the classic lines and exposed hardware of the originals. designed to showcase the warmth of edison-style filament bulbs.
Pin
3d_export
$5
Pin
...pin
3dexport
very god pin
3d_ocean
$1
Bowling pins
...e inside of cinema 4d. there are 3 files included : pin.c4d : pins array.c4d : pin.obj pins array is the bowling pins set up i...
3d_ocean
$5
Pins
...v-ray studio render setting ready close-ups camera support polys: low: 6.314 high: 1.681.922 (with turbosmooth modifier) *incl...
turbosquid
$4
pin
...osquid
royalty free 3d model pin for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669685)
3d_ocean
$15
Map Pins
...map pins
3docean
factory kremlin map moscow oil oil-derrick pin pins red russia soviet soviet union star
some stylized map pins.
turbosquid
$9
Pins
...lty free 3d model pins for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506195)
turbosquid
$7
Pin
...alty free 3d model pin for download as dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1609891)
turbosquid
$35
Pins
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Pin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Pin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Shelf
3d_ocean
$6
Shelf
...shelf
3docean
furniture shelf
a lowpoly shelf .
turbosquid
$7
Shelf
...helf, bookshelf,cafe shelf,decor, for download as max and ige on turbosquid: 3d models for games, architecture, videos. (1427685)
archibase_planet
free
Shelf
...shelf
archibase planet
shelf rack glass shelf
shelf - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelf rack glass shelf
shelf - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$3
Shelf
...shelf
3docean
shelf
a high quality shelf with high resolution texture
3d_export
$5
shelf
...shelf
3dexport
shelf
3d_export
$5
Shelf
...shelf
3dexport
shelf
archibase_planet
free
Shelf
...shelf
archibase planet
shelf shelving glass shelf
shelf 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelfs shelving bookshelf
shelf - 3d model for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelf shelving bookcase
shelf - 3d model for interior 3d visualization.
Cabinet
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet.
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet .
3d_ocean
$6
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet ready to use .
3ddd
free
cabinet
...cabinet
3ddd
cabinet
3d_ocean
$12
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet with high quality textures.
3ddd
$1
cabinet
...cabinet
3ddd
тумба
cabinet
3ddd
$1
The cabinet
...the cabinet
3ddd
тумба
the cabinet
Kitchen
3d_ocean
$29
Kitchen
...tchen interior kitchen interior rendering kitchen rendering
kitchen interior,kitchen,kitchen rendering,kitchen interior rendering
archibase_planet
free
Kitchen
...net
kitchen kitchen furniture kitchen table kitchen cabinet
kitchen table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen furniture kitchen cabinet kitchen equipment
kitchen - 3d model for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...chen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen n020315 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen cabinet kitchen furniture
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen furniture kitchen cabinet
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...kitchen
archibase planet
kitchen kitchen furniture kitchen table
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Kitchen
...itchen
archibase planet
kitchen kitchen furniture kitchen cabinet
kitchen - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Support
turbosquid
$5
Support
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
Support 3D Model
...support 3d model
3dexport
support cantilever console
support 3d model tasal 73900 3dexport
3d_export
$5
phone support
...phone support
3dexport
phone
turbosquid
$12
Support bars
...squid
royalty free 3d model support bars for download as max on turbosquid: 3d models for games, architecture, videos. (1411542)
turbosquid
$8
support weights
...id
royalty free 3d model support weights for download as max on turbosquid: 3d models for games, architecture, videos. (1411538)
turbosquid
$2
Support for flowers
...royalty free 3d model support for flowers for download as max on turbosquid: 3d models for games, architecture, videos. (1463543)
turbosquid
$2
headphone support
...royalty free 3d model headphone support for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1357583)
turbosquid
$14
Flower Support
...alty free 3d model flower support for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1497066)
turbosquid
$5
serum support
...yalty free 3d model serum support for download as c4d and obj on turbosquid: 3d models for games, architecture, videos. (1551267)
3d_export
$10
spyro joystick support
...spyro joystick support
3dexport
joystick support of spyro dragon