Thingiverse
Keyforge Key Token - Multipart by calaverajoe
by Thingiverse
Last crawled date: 3 years ago
BIG UPDATE Mar 2, 2019: Now that I've got my own 3d Printer, I've been doing some iterative tweaks to the design behind the scenes and it's resulted in a v3 update. Instead of having fiddly inserts, it uses a solid puck and a ring that sandwiches between the forged and unforged sides. There are two versions of the insert, one solid (v3_SolidInsert) and one hollow (v3_HollowInsert). The hollow one reduces material needed and has space for a 1.5" steel washer to add weight to the key for a much better feel in hand. I tweaked the aember design (v3_NewAember) so that it's flush with top of the key and a little chunkier and then created sprues to make printing them a LOT simpler. Previously you had to use a raft or brim or you ran the risk of them not sticking to the build plate. Now they print as a single piece and you can clip the sprues like on a model kit. No supports needed (all files should be properly oriented). For v3_NewAember I needed to enable "Print Thin Walls" in Cura to get the sprues to print correctly.
Everything in the pictures was printed on my Ender 3 Pro with Hatchbox PLA. I used Silver for the key body parts; red, yellow, or blue for the inserts; yellow for the aember. I tinted the aember with an orange sharpie and did a black wash on all the silver parts.
V3 Instructions: For ONE key - Print v3_ForgedSide, v3_UnforgedSide, and v3_MidRing in whatever color you would like the body of the key to be. Print v3_HollowInsert if you want a weighted key or v3_SolidInsert in the key color (Red, Blue, or Yellow). Print v3_NewAember in whatever color you'd like your Aember to be and clip the sprues off. IMPORTANT NOTE: You will probably need to enable "Print Thin Walls" or the equivalent in your slicer to get the sprues to print. The insert should fit somewhat snugly in the MidRing part, the washer will be a little lose. Before assembly, I recommend lightly sanding both sides of all parts except the aember, which you can just sand the tops of. Make sure you sand them on a true (flat) surface to make sure it all fits cleanly. For the ones in the pictures I used 400 grit sandpaper laying flat on my steel welding table. I used gel style crazy glue to assemble everything. For a full set for one player, you would do this all three times.
All of the older files are still included on the thing for folks to play with if they want, but you only need the ones that start with v3 to print a set of tokens.
UPDATE Sept 8, 2018: Had the same friend that printed the v1 files print out the v2 files for me and they work MUCH better. Not so chunky, everything fits MUCH better. The insert bits are a little fiddly to print (he ended up using a raft), but they fit and look much better. Switching this thing from Work-in-Progress to Done now. Enjoy!
UPDATE Sept 1, 2018: v2 Uploaded - The v2 simplifies the design and adjusts the insert so that they should actually fit now without a ton of post processing. The key is thinner overall when assembled now, too. Because of the changes, supports should not be needed for any prints. For 1 complete key, you need 1 each of Key v2, Key v2 Inserts, and Key v2 Aember. A full set will either be for one or two players, so 3 or 6 complete keys (respectively) plus extra Aember for people to use as tokens as you see fit.
NOTE: I removed the thumbnail images of the v1 files, though I've left those STLs in place for anyone who wants to play with them. Forged.stl probably requires supports when printing (I had to use them), and the insert will not fit without post-processing (and even then, it might not fit).
UPDATE Aug 30, 2018: I received the print of this my friend made and the tolerances are WAY too tight, so the file needs to be modified. Because of the way I designed the insert, it also needed supports to print (at least on his printer), and cleanup was a pain because of how shallow it is, so I think I'm going to redesign how the colored insert for the forged version works. I also don't like how thick the piece was overall, so I'm adjusting the design in that regard. Because of this, I've changed this to a "Work in progress" while I tinker some more. No file changes or new uploads at this time, just a heads up for anyone who likes the design that as it stands now, you won't actually be able to put the insert into the key.
UPDATE Aug 23, 2018: I've posted a make of this file https://www.thingiverse.com/make:529285 that a friend fired off for me to test fit and sizing and such (he's mailing it to me so I can check it out in person). Pretty happy with how it looks, though. I'll update when I have it in hand about how things all fit together.
As soon as I saw Keyforge, I knew I wanted to make physical keys for it. Inksplat beat me to the punch with the design here, https://www.thingiverse.com/thing:3040187 , but I wanted something a little fancier, so here we go. Unfortunately, I don't have a 3d printer to test things out to see how well everything fits.
Used the image of the key from the manual to create a vector (Photoshop and Vectornator Pro), then used that to model from scratch in Fusion 360. This is my first 3d model ever, so I claim no level of quality on this.
For a set for ONE player, you will need 3 each of Forged and Unforged. The Forged Insert is the colored insert for the keys, and in the manual, they are red, blue, and yellow, but you can print them whatever color you would like, 3 total. The Aember is designed to be used installed in the forged side as well as tokens while playing, so you would print 6 sets total - three to attach, three to play with.
I would love feedback and to see how this looks when printed up.
Everything in the pictures was printed on my Ender 3 Pro with Hatchbox PLA. I used Silver for the key body parts; red, yellow, or blue for the inserts; yellow for the aember. I tinted the aember with an orange sharpie and did a black wash on all the silver parts.
V3 Instructions: For ONE key - Print v3_ForgedSide, v3_UnforgedSide, and v3_MidRing in whatever color you would like the body of the key to be. Print v3_HollowInsert if you want a weighted key or v3_SolidInsert in the key color (Red, Blue, or Yellow). Print v3_NewAember in whatever color you'd like your Aember to be and clip the sprues off. IMPORTANT NOTE: You will probably need to enable "Print Thin Walls" or the equivalent in your slicer to get the sprues to print. The insert should fit somewhat snugly in the MidRing part, the washer will be a little lose. Before assembly, I recommend lightly sanding both sides of all parts except the aember, which you can just sand the tops of. Make sure you sand them on a true (flat) surface to make sure it all fits cleanly. For the ones in the pictures I used 400 grit sandpaper laying flat on my steel welding table. I used gel style crazy glue to assemble everything. For a full set for one player, you would do this all three times.
All of the older files are still included on the thing for folks to play with if they want, but you only need the ones that start with v3 to print a set of tokens.
UPDATE Sept 8, 2018: Had the same friend that printed the v1 files print out the v2 files for me and they work MUCH better. Not so chunky, everything fits MUCH better. The insert bits are a little fiddly to print (he ended up using a raft), but they fit and look much better. Switching this thing from Work-in-Progress to Done now. Enjoy!
UPDATE Sept 1, 2018: v2 Uploaded - The v2 simplifies the design and adjusts the insert so that they should actually fit now without a ton of post processing. The key is thinner overall when assembled now, too. Because of the changes, supports should not be needed for any prints. For 1 complete key, you need 1 each of Key v2, Key v2 Inserts, and Key v2 Aember. A full set will either be for one or two players, so 3 or 6 complete keys (respectively) plus extra Aember for people to use as tokens as you see fit.
NOTE: I removed the thumbnail images of the v1 files, though I've left those STLs in place for anyone who wants to play with them. Forged.stl probably requires supports when printing (I had to use them), and the insert will not fit without post-processing (and even then, it might not fit).
UPDATE Aug 30, 2018: I received the print of this my friend made and the tolerances are WAY too tight, so the file needs to be modified. Because of the way I designed the insert, it also needed supports to print (at least on his printer), and cleanup was a pain because of how shallow it is, so I think I'm going to redesign how the colored insert for the forged version works. I also don't like how thick the piece was overall, so I'm adjusting the design in that regard. Because of this, I've changed this to a "Work in progress" while I tinker some more. No file changes or new uploads at this time, just a heads up for anyone who likes the design that as it stands now, you won't actually be able to put the insert into the key.
UPDATE Aug 23, 2018: I've posted a make of this file https://www.thingiverse.com/make:529285 that a friend fired off for me to test fit and sizing and such (he's mailing it to me so I can check it out in person). Pretty happy with how it looks, though. I'll update when I have it in hand about how things all fit together.
As soon as I saw Keyforge, I knew I wanted to make physical keys for it. Inksplat beat me to the punch with the design here, https://www.thingiverse.com/thing:3040187 , but I wanted something a little fancier, so here we go. Unfortunately, I don't have a 3d printer to test things out to see how well everything fits.
Used the image of the key from the manual to create a vector (Photoshop and Vectornator Pro), then used that to model from scratch in Fusion 360. This is my first 3d model ever, so I claim no level of quality on this.
For a set for ONE player, you will need 3 each of Forged and Unforged. The Forged Insert is the colored insert for the keys, and in the manual, they are red, blue, and yellow, but you can print them whatever color you would like, 3 total. The Aember is designed to be used installed in the forged side as well as tokens while playing, so you would print 6 sets total - three to attach, three to play with.
I would love feedback and to see how this looks when printed up.
Similar models
thingiverse
free
Keyforge Key for 8mm cubes
...at's what this is designed to fit. feel free to open the model in tinkercad and adjust it to whatever tokens you use!
enjoy!
thingiverse
free
Printrbot Simple Metal - Filament guides for Aluminium Handle by jphphotography
... clip that fits around the aluminum handle. print as many as you need, i think 1 would actually be enough but i printed 2 anyway.
thingiverse
free
Rise of the Necromancers + Dawn and Demons Insert by Hrein
...them being damaged when you carry your board game around.
also this was designed to fit sleeved cards (i use sleeve kings brand).
thingiverse
free
Updated Pins for Micro Gear Heart by LittleDangerous
...ied the pin geometry so they fit correctly now. being so small, you'll need some needle nose pliers in order to insert them.
thingiverse
free
Modular Sprue Rack
...he uprights and 2 of the runners for a complete set.
i've also included a combined stl with them laid out for a single print.
thingiverse
free
Auf den Spuren von (The Voyages of) Marco Polo insert/Inlay (remix) by slade_the_dragon
...the bigger coins is better, so i made a v2 for that too. (v1 is in the picture with everything in the box, v2 has an extra photo.
thingiverse
free
Aember Token
...i needed to make it square as possible, to allow easy picking up from table while it takes small amount of space in my token box.
thingiverse
free
Swiss-Knife Key Ring / Key Holder by azraelho
...normal m2.6 x 6mm screws.
i've upload a step file also. if you want to insert more keys, you can extend the pin in cad also
thingiverse
free
Keyforge Key/Aember Combo! by CosuCreate
...y warping.
if you like my designs and want to support future endeavors? consider buying me coffee: http://ko-fi.com/coreysullivan
thingiverse
free
Lancer Tokens - Various by CatOfManyFaces
...ium!
there seems to be more files than thingiverse will show you now. i checked and if you download it all 40+ files are there :)
Calaverajoe
thingiverse
free
Crokinole 20s Tube Plug - Mayday 2020 Kickstarter by calaverajoe
...hich have ~36mm inner diameter. they should work for other tubes, too, but may need scaling for whatever their inner diameter is.
thingiverse
free
Ender 3 Pro Power Supply fan silencer with logo
...the "ender 3 pro power supply meanwell baffler" by calaverajoe scale this to 10% of the original size to...
thingiverse
free
Crokinole Disc / Button Bowl by calaverajoe
...ppy to tweak the design for other boards, but i’d need all those dimensions listed above and on the cross section photo to do so.
thingiverse
free
Ender CR10V3 and 5 Pro Tool Holder by Z3DInnovations
...ender 3 pro tool holder - a remix by calaverajoe print upside down tip of cutter hook touching plate!!!...
thingiverse
free
Olson Mask template for Prusa Mini by Adowoowoo
...of the sewing pattern for olson masks. instructions: user calaverajoe noted that scaling to 108% seems to work for...
thingiverse
free
Ender 3 Pro Tool Holder - Remix by neyth_makes
...tool holder - remix by neyth_makes thingiverse remix of calaverajoe#39;s toolholder. this version now securely slides into the rails...
Keyforge
thingiverse
free
Deck untamed keyforge by Lhamhuerthe
...deck untamed keyforge by lhamhuerthe
thingiverse
box for a keyforge deck
thingiverse
free
Keyforge Deckboxes by Tech-Make
...keyforge deckboxes by tech-make
thingiverse
two deckbox designs for a keyforge deck
thingiverse
free
Keyforge Deck Tray
...a simple tray that will hold four sleeved keyforge decks.
comes with an optional lid.
will fit into an arkhive or similar product
thingiverse
free
Keyforge Keys
...ns for the game, since up until this point i had been using currency.
these are a cool spin on the idea of the keys for the game.
thingiverse
free
Dis Token for Keyforge by Achoo01
...dis token for keyforge by achoo01
thingiverse
simple dis token
thingiverse
free
KeyForge Tokens by zxqueb
...age (1, 3 and 5), and stunned effects. i didn't design the actual keys because someone else did a nice job on those already.
thingiverse
free
Keyforge Deck Holder
...ons:
a single deck holder
a double deck holder
a single deck holder for sleeved cards
and a double deck holder for sleeved cards.
thingiverse
free
Keyforge - Farewell to the Martian Knights Trophy
...games held an event where each contestant had to bring a deck with both mars and sanctum in it. the winner took home this trophy!
thingiverse
free
Keyforge Key Remixed Base by nuke737
...keyforge key remixed base by nuke737
thingiverse
modified the base of the original model to make it easier to print
thingiverse
free
Keyforge status dice by vikingfabian
...s them worse.
i would recommend printing about 12 to 16 of them.
these are banned from official tournaments, to prevent cheating.
Multipart
thingiverse
free
MULTIPART CASE GT2560 by Pizzu_NOART3D
...rse
this is a multipart case for gt2560 motherboard.
this project is printable with all 3dprint.
print and reassemble with glue.
thingiverse
free
Eyeball - Multipart by coolcow
...eyeball - multipart by coolcow
thingiverse
i made this for last years halloween: eyeball with glow in the dark iris.
thingiverse
free
Multipart Car by CentaurDesign
...ar by centaurdesign
thingiverse
drafting & design students; noah, hayden, ali, and tommy designed this car using solid edge.
thingiverse
free
Headohone Holder Multipart by MyFoot
...e, had to cut it up and make it detachable.
headphone holder and desk part printed with supports. cap and screw printed without.
thingiverse
free
Concavenator - Multipart by FBTH
...ete version and a split version. apologies for no pegs, but maybe that will change with an update.
high resolution, so be warned!
thingiverse
free
Unicorn (MultiPart MultiColor) by bolsoncerrado
...unicorn (multipart multicolor) by bolsoncerrado
thingiverse
ears require rework in order to get proper slicing. will solve asap.
thingiverse
free
Li Shuwen Spear multipart by Deathkeeperx
...huwen spear multipart by deathkeeperx
thingiverse
li shuwen spear head that i made, but split so that is is less than 1 ft tall.
thingiverse
free
Big Space Robot multipart arm by wizzdk
...re!
haven't tried on fdm printers, so might require tweaking.
updated 26. august 2018 with 2 stl files scaled for 8mm models.
thingiverse
free
Multipart Soapdish
...07_pin-98percent" (22x)
if you want to modify the design you can download the fusion file "soapdish-multipart.f3d"
thingiverse
free
D20 Wall Art (multipart) by Ilueen
...ated to allow for multiple colors without having to hot swap filament.
small chamfers to prevent elephant foot and ease assembly.
Token
turbosquid
free
Game Token
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Bitcoin currency token
...alty free 3d model bitcoin currency token for download as c4d on turbosquid: 3d models for games, architecture, videos. (1320950)
turbosquid
$5
Fire Spell Token
...model fire spell token for download as fbx, dae, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1687205)
3ddd
$1
The Study by Token NYC
...porary, warm and classic, the study blends a modern industrial aesthetic with a commitment towards purposeful, considered living.
3d_ocean
$2
Gemini token
...d specular with full customization option in .pdn file contains .blend, .dae and .obj files also contains .mat file and .ent f...
turbosquid
$9
MyBit Token gold coin
...yalty free 3d model mybit token gold coin for download as max on turbosquid: 3d models for games, architecture, videos. (1621567)
turbosquid
$9
MyBit Token black coin
...alty free 3d model mybit token black coin for download as max on turbosquid: 3d models for games, architecture, videos. (1621572)
turbosquid
$9
RAE Token black coin
...oyalty free 3d model rae token black coin for download as max on turbosquid: 3d models for games, architecture, videos. (1625031)
turbosquid
$9
RAE Token gold coin
...royalty free 3d model rae token gold coin for download as max on turbosquid: 3d models for games, architecture, videos. (1625029)
turbosquid
$9
MGC Token black coin
...oyalty free 3d model mgc token black coin for download as max on turbosquid: 3d models for games, architecture, videos. (1614373)
Key
archibase_planet
free
Key
...key
archibase planet
bunch of keys key
key n190510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
key
...key
3dexport
key
archibase_planet
free
Key
...key
archibase planet
key
key n080710 - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$2
Key
...key
3docean
door key lock open unlock
a key facecount: 617 (2x subsurfed: 9872)
archibase_planet
free
Key
...key
archibase planet
key
key n240713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Key
...key
archibase planet
key
key 2 n080710 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$3
Keys With Key Chain
... chain 3d model for download as blend, dae, stl, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1673644)
archibase_planet
free
Key
...key
archibase planet
key
key ancient strike plate n130912 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Key
...key
archibase planet
key
key stephan mette n300412 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
key
...key
3dexport
a simple key obj, fbx, blend