KevPV 2.0 1103 Brushless Frame by bernitz

Last crawled date: 3 years ago

Components I used:
1103 8,000kv Racestar motors https://bit.ly/3owUdBi
Super_s f4 FC and ESC stack https://bit.ly/3oD7IQ2
Both a AKK A5 and AKK BS2 camera.
2" and 2.5 " props. - https://bit.ly/39DCJ1K
UPDATED - 2", 2" stretch and 2.3" frame added and camera mount improved and updated
UPDATED - optional prop guards added - this fit a 2.5" prop
UPDATED - version 2.0 added. All round improvements - stiffer, lighter and even better airflow. Print out the TPU spacers (different heights included) to put between the FC and ESC and frame - this stops parts near the holes being knocked off the boards in heavy crashes..
UPDATED:- Updated to version 1.3. frame is stiffer, stronger while taking a couple of grams off and adding camera angle adjustment.
UPDATED: Cam holders updated to 1.3a versions - just improved the camera angle screw slot.
97mm diagonal quad frame that will take up to a 2.5" prop.
16x16 FC mount (if anyone wants a 20x20 version let me know and I'll add one).
Mount the ESC under the frame, and FC on top for a low profile build.
Works with both AIO and seperate FPV camera/TX.
This is designed to be printed in PC. I used PC-Max. Its super stiff and seems unbreakable...
Should work fine in Nylon - e.g. Taulman 910, but will have more flex. May work in ABS - let me know!
Top cover and battery strap (for 300mah 2S Nanotech battery) printed in TPU.