Thingiverse
K8400 Heatbed connector box by mortenborge
by Thingiverse
Last crawled date: 3 years ago
This thing is a heatbed connector box for the Velleman Vertex K8400 that uses Anderson PowerPole connectors as well as Molex KK to connect the heatbed to the printer.
I made it compitable with Bo_Ris Wire covers, the one for mk3 heatbed (https://www.thingiverse.com/thing:2255250), but it also works fine standalone as shown in pictures.
You will need two pairs of Anderson PowerPole connectors, I used 30amp version, but 15 amp will work to, they use the same housing. These connectors work very well for this purpose as they are rated for high amps in a small housing and can be mounted in a box or be as is on a cable an are the same in both ends.
You can find them cheap on ebay, and you do not need the crimp plier, soldering works fine.
You will need a Molex KK connector for the thermistor cable, 2 pin 2.54 is what to look for, also chep on ebay, buy more of these as the fit on everything on these printers!
You will need 4 M3 10-12mm caphead screws for the housing itself to the printer
You will need 4 M3 12-14mm countersunk screws for the cover to the housing
Use glue to fasten the molex housing part to the housing as shown in the picture and solder on wires that will go to the motherboard.
I made it compitable with Bo_Ris Wire covers, the one for mk3 heatbed (https://www.thingiverse.com/thing:2255250), but it also works fine standalone as shown in pictures.
You will need two pairs of Anderson PowerPole connectors, I used 30amp version, but 15 amp will work to, they use the same housing. These connectors work very well for this purpose as they are rated for high amps in a small housing and can be mounted in a box or be as is on a cable an are the same in both ends.
You can find them cheap on ebay, and you do not need the crimp plier, soldering works fine.
You will need a Molex KK connector for the thermistor cable, 2 pin 2.54 is what to look for, also chep on ebay, buy more of these as the fit on everything on these printers!
You will need 4 M3 10-12mm caphead screws for the housing itself to the printer
You will need 4 M3 12-14mm countersunk screws for the cover to the housing
Use glue to fasten the molex housing part to the housing as shown in the picture and solder on wires that will go to the motherboard.
Similar models
thingiverse
free
Powerpole Cable connector housing by drewcassidy
...o customize the size for your own needs. requires two 8mm m3 screws with nuts, as well as a 7/16" long 3/32" dowel pin.
thingiverse
free
Prusa i3 MK3 60 degree heatbed cable cover by OakMountain
...with screw connectors.
you will need
m3x10 screw (3x)
m3n nut (3x)
to complete this modification (same as original prusa cover).
grabcad
free
Anderson Powerpole Housing
...esigned to be printed in two pieces then glued with the connector in place. glued body then screws onto the panel using m3 screws
thingiverse
free
QCX Classic Enclosure by KN6EZE
...e design.
you will need:
4x m3 screws (need to double check size)
4x m3 nuts to hold screws in place (need to double check size)
thingiverse
free
Kossel Power Supply Box by geniusdesign
... to switch on / off at the bottom of the box (need to cut a small hole on the power supply box). wiring diagram also attached :-)
thingiverse
free
Parametric PowerPole Clip by diodenschein
...anderson powerpole connectors,
popular with amateur radio operators.
fits 15a, 30a and 45a version, as they use the same housing.
thingiverse
free
DIN rail mount for PowerPole connectors: upright by ecloud
...owerpoles instead of wiring directly.
you can screw a short m3 bolt into the bottom to hold it more tightly in place on the rail.
thingiverse
free
Power Expander Case for Vertex K8400 by Edurobot
...r.
no need to change the screw. use the original cover.
order power expander: http://reprap.me/electronic/power-expander.html
thingiverse
free
Keystone Anderson Powerpole by lpinter
... it is not available in stores because the keystone opening is just barely wide enough to host two anderson powerpole connectors.
3dwarehouse
free
Anderson Powerpole Connector Power Splitter Distributor
...anderson powerpole connector power splitter distributor
3dwarehouse
anderson power pole fuse box
Mortenborge
thingiverse
free
K8400 PTFE tube and cable holder by mortenborge
... left side if you got two printheads
you need to change the short capheadscrew m5x12 to one in same length as the long one, m5x20
thingiverse
free
Creative Live! Cam Chat HD holder for K8400 by mortenborge
...nt)
switch out one of the top/side holders and mount the part2 with 4 m2 screws from inside of part2. they need to be 5-10mm long
thingiverse
free
Smun S-400 series drill guide and spacer by mortenborge
...m drillbit to make holes and m5x10mm screws if you use drillguide as spacer, if you use spacer part you need to use m5x8mm screws
thingiverse
free
Thrustmaster T-series Quickrelease thing by mortenborge
...an get to them and still can take everything apart...
wiring example can be found on my blog: https://mortenstechcave.blogspot.no
thingiverse
free
Slim Quick Release connector adapter by mortenborge
... so you dont twist the cable, secure it with a ziptie
wiring example can be found on my blog: https://mortenstechcave.blogspot.no
K8400
thingiverse
free
Vertex K8400 Small Corner part (K8400-HQP-SC) by Hest
...vertex k8400 small corner part (k8400-hqp-sc) by hest
thingiverse
vertex k8400 small corner part (k8400-hqp-sc)
thingiverse
free
Base for K8400 by Hitty
...base for k8400 by hitty
thingiverse
just a base for your k8400 to extend the space for the power adapter.
thingiverse
free
K8400 Fan tool by dergringo
...k8400 fan tool by dergringo
thingiverse
k8400 fan tool
thingiverse
free
Support ventilateur K8400 / Fan support K8400 by ldellanna
........................
fan support for velleman vertex k8400
minimum layer : 0.2mm
printing time in 0.1mm -> max 20 minutes
thingiverse
free
K8400 Scraper holder by Storm67
...k8400 scraper holder by storm67
thingiverse
scraber holder for velleman k8400 vertex
thingiverse
free
Fan Tool K8400 Velleman by dergringo
...fan tool k8400 velleman by dergringo
thingiverse
fan tool velleman k8400
thingiverse
free
Endcap Custom for Vertex K8400 by olechristiandalseth
...endcap custom for vertex k8400 by olechristiandalseth
thingiverse
endcap for vertex k8400
left and right.
thingiverse
free
Vertex K8400 spool holder by simersion
...vertex k8400 spool holder by simersion
thingiverse
spoolholder for vertex k8400
100mm length and 35mm diameter.
thingiverse
free
E3D dual head K8400 by hexxter
...e3d dual head k8400 by hexxter
thingiverse
holder for the e3d hot end on the vertex k8400 printer.
thingiverse
free
Vertex K8400 power switch by Zannddor
...vertex k8400 power switch by zannddor
thingiverse
alternative power switch to the 3d printer vertex k8400
Heatbed
thingiverse
free
HeatBed by moreken
...heatbed by moreken
thingiverse
heatbed for my printer3d "moredelta"
thingiverse
free
heatbed (double heatbed) holder by Vo_Van_163
... bigger size than work desk. this holder - is good solution for me/ and also this is a good solution for double hotbed regulation
thingiverse
free
Heatbed Spatula by Brabus453
... spatula by brabus453
thingiverse
heatbed spatula
this is a simple spatula to scrape the heatbed from the first layer residues.
thingiverse
free
Heatbed Mount for round Heatbeds by OliverReinecke
...y bottom board to fix the heatbed-mount. but of coursse there are lots of alternatives to do this... its up to you. hope it helps
thingiverse
free
Heatbed plane test
...eds ... this simple object allows to see where the bonding of the object and the flatness of the heatbed might not be optimal ...
thingiverse
free
Heatbed Knob by Sp0nge
...heatbed knob by sp0nge
thingiverse
craftbot plus heatbed knob
print it in abs and put a nut inside.
thingiverse
free
Heatbed cable cover
... the heatbed when i placing the pei sheet.
so i designed this small cover, it clips right down over the +/- screws on the heatbed
thingiverse
free
Heatbed Mosfet controller by oscar_diciomma
...heatbed mosfet controller by oscar_diciomma
thingiverse
heatbed mosfet controller
thingiverse
free
Parametric Heatbed Clamp by verglor
...y verglor
thingiverse
minimalistic heatbed clamps that do not get in way of nozzle.
can be customized for any heatbed thickness.
thingiverse
free
Heatbed support
...ail
heatbed size 328mm
use m5x10 with washers or m5x8 for the 20x20 profile
m4 for heatbed
can be use with wells of 45mm of diam.
Connector
turbosquid
$5
Connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Connector 3D Model
...connector 3d model
3dexport
connector штекер 3d
connector 3d model manch111 83121 3dexport
3d_export
$14
connector production equipment
...connector production equipment
3dexport
connector production equipment
3d_export
$10
connector xt60
...e designing, and will help save your precious time. the scale of the model is 1:1. the dimensions are for reference in the image.
turbosquid
free
Audio connectors
...del audio connectors for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1424706)
3d_export
$20
car connectors dj70
...quot; connector 9-pin "dj7091a-2.8-11/21" terminal (male) "dj611-2.8" terminal (female) "dj622-2.8"
turbosquid
$30
Cinch connector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Jumper Connector
...umper connector for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1494917)
turbosquid
$15
RCA Connector
...l rca connector for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1376648)
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.