K Cup Dispenser by lenknermj

Last crawled date: 3 years ago

Simple, relatively quick printing K Cup dispenser.
Tubular cylinders are .8mm thick, so it should be very quick to print with no infill movements. Plenty strong as well.
The "Main" design has everything you need to print a 3 tube dispenser which will hold 4 kcups per tube (1 hanging, 3 in reserves), including J hooks to hang from a wireshelf or other horizontal support. Alternatively, you can hang on a wall with a couple of screws/nails. If you want to hold more than 4 cups, you can print the "Extension" model to expand the tubes by 3 cups each. There are alignment pins on the bottoms of the tubes and holes on the tops, as well as on top of the hanging dispenser, and the freestanding base model. Use whatever glue is recommended for the material you're printing with (I use hotglue for most everything...lol)