JYSK Basic Box 29l filament drybox by Pjoter

Last crawled date: 3 years, 1 month ago

I designed a filament drybox to keep filament dry and clean.
So far it hold up to 5 filament spool each 1 kg. There is room for 4 spools hanging from the pipe and 1 spool laying on horizontal spool holder (which you need to download separately - https://www.thingiverse.com/thing:2949128).
Shopping list:
Basic Box 29l from JYSK
35 cm of PCV pipe 1" (33,4 mm outer diameter)
8x M4 35 mm screws (or longer) [1]
14x M4 10 mm screws (or longer)
22x M4 nut
44x M4 washer
5x ~10 cm PTFE tube
Hygrometer (dimensions of mine was 45 x 27.5 mm)
Silicone gasket maker
200 - 300 g of silica gel (best one would be with a marker)
Box for silica gel (smaller then 10x20x10 cm)
Printing list:
2x inner_pipe_slot
2x outer_pipe_slot
5x outer_filament_socket
5x inner_filament_socket
2x hygrometer_frame
2x pipe_plug
1x horizontal_bottom
1x horizontal_top
1x gasket_shaper
10x lid_clip
I also designed plugs if someone would like to change the location of filament sockets or hygrometer, Replace the outer part with the plug and place filament socket or hygrometer somwhere else.
[1] I used 30 mm long but I do recomend longer one
16.06.2018 - published