Thingiverse
Just right light for Lulzbot Mini by Ductsoup
by Thingiverse
Last crawled date: 3 years ago
Aziz light!
Luvs me da Mini but it doesn't come with lights. The cheap LED flashlights from Lowes or Home Depot get the job done in a pinch but here's a better, more permanent solution to the problem. For me, 24" of LED strip lights front and back is massive overkill. Six warm analog LEDs in front yields a little over 40 foot-candles at the bed and that seems reasonable.
This clip is designed to snug fit the top frame without drilling holes or additional hardware and, angles the LED strip towards the bed/extruder so you get the light just where you need it and nowhere else. If the fit isn't tight enough just add a length of black electrical tape to snug things up.
I used two segments of this adhesive backed strip (about 120mA @ 12VDC) and printed in black so it blends in.
https://www.adafruit.com/products/357
Consider using some Loctite super glue ultra gel as it doesn't degrade over time from the heat generated by the LEDs. If your strip is shorter or longer just scale the Z-axis.
Optional Hack (that will void your warranty)
If you don't want (yet another) a separate power supply and have the skills and confidence to modify the wiring without damaging yourself or your printer there's a way to make this a bit neater. If you're not 100% sure what you're doing it's probably best to stick with the extra wall plug.
The Mini uses a 24VDC power supply but these LED strips can only tolerate 12VDC. For low amp draw things like this my go-to solution is a Traco TSR 1-24120 DC-DC buck converter. They're much more efficient and readily available from all of the major supply houses like Newark.
http://www.newark.com/tracopower/tsr-1-24120/dc-dc-converter-non-iso-pol-1/dp/51R5687?st=TSR%201-2412
The leads are closely spaced and difficult to solder. I opted to stick one of these to the inside of the case instead.
https://www.adafruit.com/product/65
Update
The connections to the LED strip are delicate, the mini_light3 file adds a strain relief.
Luvs me da Mini but it doesn't come with lights. The cheap LED flashlights from Lowes or Home Depot get the job done in a pinch but here's a better, more permanent solution to the problem. For me, 24" of LED strip lights front and back is massive overkill. Six warm analog LEDs in front yields a little over 40 foot-candles at the bed and that seems reasonable.
This clip is designed to snug fit the top frame without drilling holes or additional hardware and, angles the LED strip towards the bed/extruder so you get the light just where you need it and nowhere else. If the fit isn't tight enough just add a length of black electrical tape to snug things up.
I used two segments of this adhesive backed strip (about 120mA @ 12VDC) and printed in black so it blends in.
https://www.adafruit.com/products/357
Consider using some Loctite super glue ultra gel as it doesn't degrade over time from the heat generated by the LEDs. If your strip is shorter or longer just scale the Z-axis.
Optional Hack (that will void your warranty)
If you don't want (yet another) a separate power supply and have the skills and confidence to modify the wiring without damaging yourself or your printer there's a way to make this a bit neater. If you're not 100% sure what you're doing it's probably best to stick with the extra wall plug.
The Mini uses a 24VDC power supply but these LED strips can only tolerate 12VDC. For low amp draw things like this my go-to solution is a Traco TSR 1-24120 DC-DC buck converter. They're much more efficient and readily available from all of the major supply houses like Newark.
http://www.newark.com/tracopower/tsr-1-24120/dc-dc-converter-non-iso-pol-1/dp/51R5687?st=TSR%201-2412
The leads are closely spaced and difficult to solder. I opted to stick one of these to the inside of the case instead.
https://www.adafruit.com/product/65
Update
The connections to the LED strip are delicate, the mini_light3 file adds a strain relief.
Similar models
3dwarehouse
free
Edge Lighting TEB-60L-12DC LED Power Supply
...output. used with edge lighting led soft strip #12vdc #dimmable_led #edge_lighting #led_power_supply #led_transformer #teb60l12dc
3dwarehouse
free
LED Power Supply 12VDC 30W
...led power supply 12vdc 30w
3dwarehouse
led power supply 12vdc 30w #ledpower_supply
thingiverse
free
LM2596 / LM2596S Buck Converter Case 20mm Power Switch Mount by irwinpks
...ness than smd3528 led strip whitehttps://www.amazon.com/gp/product/b013c2u0io/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Buckie DC-DC Converter Housing
...fs inside to mount this buckie converter to. link to amazon - https://amzn.to/2mspbrj
modifications and improvements are welcome!
thingiverse
free
Mini power supply DC-DC converter by dgTECH3D
...www.banggood.com/dc-dc-step-down-power-supply-adjustable-module-with-lcd-display-without-housing-case-p-1038737.html?rmmds=search
thingiverse
free
Litho.BOX by Lab3Dp
...f you need differently sized boxes just let me know in the comments! the model is not customizable as i modeled it in fusion 360.
thingiverse
free
Mavic Mini Ring-Light-Setup by BIBOBozele
...ing:4607207
also you need a lightweight power bank and led strips perhaps a rgb sps.
done! have fun and fly! perhaps with lights!
grabcad
free
TSR 1-2450
...tsr 1-2450
grabcad
dc/dc converter
thingiverse
free
NA Mx5 Miata Wide open TSI by Kumoen
... wide opening.
this style doesn't include lighting solution, but you can easily stick a led strip that would do that function
grabcad
free
Traco Power TSR 0.6 Series 0.6A
...traco power tsr 0.6 series 0.6a
grabcad
non-isolated dc/dc converter
Ductsoup
thingiverse
free
Duplex Dosing Pump Stand by Ductsoup
...duplex dosing pump stand by ductsoup
thingiverse
a duplex version of https://www.thingiverse.com/thing:2279394.
thingiverse
free
Bench Test Kit for Atlas Scientific Sensors by Ductsoup
...or atlas scientific sensors by ductsoup
thingiverse
holder and an open enclosure for prototyping atlas scientific sensor probes.
thingiverse
free
Canning Jar Sprouting Lid for Lulzbot by Ductsoup
...tsoup
thingiverse
not much of a remix, just the cooked stl files to save lulzbot users with 0.5 extruders some time and trouble.
thingiverse
free
Air Quality Sensor Suite Enclosure by Ductsoup
...he mq-2 use a 16mm length. mcmaster-carr is a good source for such things.
https://github.com/ductsoup/air-quality-sensor-suite
thingiverse
free
Ceratoposaur (FFD edition) by Ductsoup
...e must have already done this but, i couldn't find it. if i've reinvented the wheel at least it didn't take too long.
thingiverse
free
Arthritis tools inspired key assist by Ductsoup
...s maybe a little less elegant but quite a bit more sturdy. the hole is sized for a 6-32 nut and bolt about 3/8 to 1/2" long.
thingiverse
free
MPCNC Modular Electronics Mount by Ductsoup
...to use it for something else.
seriously down the rabbit hole on this one in case you hadn't noticed. the upside is, it works.
thingiverse
free
Growler Saver by Ductsoup
...end the life if your growlers. not necessary, but it would probably be appropriate to print this in beer filament if you have it.
thingiverse
free
Dremel 4000 tool holder for MPCNC by Ductsoup
...because i didn't have 12 hours to print it solid. the fit is arguably perfect. nice job mstrperson on the 3d printed threads.
thingiverse
free
Growler Drying Stand by Ductsoup
...fits the 45-46mm inside diameter growlers i have. leaving a couple five mm of slop so the fit isn't too tight is recommended.
Lulzbot
thingiverse
free
LulzBot Rocktomek by LulzBot
...lulzbot rocktomek by lulzbot
thingiverse
https://download.lulzbot.com/3d_models/rocktomek/
thingiverse
free
THE Lulzbot spool holder
...the lulzbot spool holder
thingiverse
stl and ipt topmount spool holder for lulzbot
thingiverse
free
Lulzbot logo by Halg199703
...lulzbot logo by halg199703
thingiverse
this is the lulzbot logo. i also have a file for dual extruder.
thingiverse
free
LulzBot Bio printer Model
...lulzbot bio printer model
thingiverse
this is a model of the lulzbot bioprinter
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
Lulzbot Spool Holder by MAKE
...lulzbot spool holder by make
thingiverse
a spool holder for your lulzbot.
thingiverse
free
Lulzbot mini spool holder by chewie80524
...lulzbot mini spool holder by chewie80524
thingiverse
this part holds the spool on a lulzbot mini. this design came from lulzbot.
thingiverse
free
Lulzbot Claystruder by 102drewt
...r for the lulzbot taz 4. every thing is snap together, and it only requires a threaded rod, a nut to fit it, and a stepper motor.
thingiverse
free
Lulzbot Mini Enclosure brackets by chewie80524
...lulzbot mini enclosure brackets by chewie80524
thingiverse
lulzbot taz/mini enclosure brackets.
thingiverse
free
Lulzbot mini toolbox by nicsna
...t mini using cura scale down to 0.97.
hope you like it and make sure to leave some feedback or suggestions for my next design. :)
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model
Right
turbosquid
$6
To the right
...squid
royalty free 3d model to the right for download as max on turbosquid: 3d models for games, architecture, videos. (1200265)
turbosquid
$5
Pass Right
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$14
southern right whale
...southern right whale
3dexport
detailed model of southern right whale
3d_export
$10
Tibet right
...tibet right
3dexport
dimensions of the pencil case 404/1982/380 mm
3d_export
free
right arrow
...e <br> file contains the <br> and <br> formats.<br>you can use it for presentation slides or 3d printing.
design_connected
$16
Feng Chaise Right
... chaise right
designconnected
ligne roset feng chaise right lounge chairs computer generated 3d model. designed by didier gomez.
3d_export
$5
Right arrow 3D Model
...right arrow 3d model
3dexport
right turn sign signal signage direction
right arrow 3d model ryisnelly100 88745 3dexport
turbosquid
free
Keep Right Sign
...rbosquid
free 3d model keep right sign for download as blend on turbosquid: 3d models for games, architecture, videos. (1522189)
turbosquid
$55
Anatomical right Skeleton
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
No Right/Left Turn
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Light
archibase_planet
free
Light
...light
archibase planet
lamp lighting light
light - s2 - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
light luminaire lighting
light l0465 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light
archibase planet
luster lighting solution
light - s - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
luster lamp lighting
light 1 - 3d model for interior 3d visualization.
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
lighting luminaire candlelight
light l0463 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...
Just
3d_export
$5
just
...glass color: gold lampshade color: transparent polys: 242 036 verts: 247 950 https://www.lampatron.ru/cat/item/design-lamps-just/
3d_export
$5
just for fun
...just for fun
3dexport
just for fun
3d_export
$1
just sword
...just sword
3dexport
turbosquid
$38
just a box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Rugiano / Daytona Just
...
rugiano , ит , капитоне
rugiano / daytona just
turbosquid
$6
Cattelan Italia Just
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Dinosaur (just for fun)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Just a beautiful girl
...just a beautiful girl
3dexport
use the model for any purpose
3d_export
free
just a pen
...eated to scale. a copy of the real pen. keyshot materials were used from the standard set. i would be grateful for your feedback.
3d_export
$5
Well Just You Wait
...a character from the cartoon "well, just you wait!". the hare is a robot, a real nostalgia for your family and friends!