JumperT16 FlyMore Pack

Last crawled date: 4 years, 2 months ago

This slides and locks in just as the stock Jumper battery lid but can accommodate 4 Lion cells in a 2S2P configuration, potentially doubling your mah capacity.
you will also have the abailty to run another 2 cells in the stock location ( without stock cell holder) AND 4 cells in this pack, tripling your capacity.
BUT WAIT THERE'S MORE! You can also have 2 cells in the stock location and a 3S1P configuration in this pack running just your crossfire. you would have to provide a switch for the crossfire, or get silly and add a relay circuit with the trip signal coming from the stock power pin when signal is sent to the crossfire via " external module" is active.
pics below shows version without refined edges
i recommend making a JXT Balance to xt30 pigtail so its easier to remove pack from remote.
**UPDATE
I created another version named "T16_JUMPER_HUMP_PACK_FINISHED_PACK.stl" that does not have the contoured cell position holder on the bottom. This is specifically for a finished 4 cell 18650 packs that have heatshrink over all the cells. File "jumperpackfinalV2.stl" is better suited for naked 18650 cells that are not encased in heatshrink. Lid is compatible with both available versions.