JAFAR Project Fatshark Doors by amolteni

Last crawled date: 3 years ago

Hello Guys!
I've designed the doors for the Fatshark Googles usable in conjunction with the JAFAR Rx Module produced by Michele "MikyM0use" Martinelli.
The module page is here: https://github.com/MikyM0use/JAFaR
Here you can find the simple door for the standalone module (Door Left Simple), the diversity door (Door Left Diversity), that has to be used when the diversity module is placed on top of the standard module (with male-female short pins) and last but not least, the diversity doors to place the second receiver on the right (Door Left Cables and Door Right). This last option is still in developing and the design can change in the future (as soon as I have time). With this setup you have many options to complete the installation, you can wire cables outside the googles, or you may choose to open them and do some soldering inside. You can choose whatever you prefer.
I prefer the diversity-all-in-one, placing the two receivers on the left as the standard Fatshark module and using the Diversity Left Door.
Any suggestions for future improvements will be really appreciated.
Update 1
I've uploaded also a Diversity door for the right side of the googles (Door Right No Holes) with no holes for the cables, this allows you to mount the diversity module with the cables inside the googles. You should open your googles and do something DIY to accomodate the cabling.